Forms :: Calling From Other Data Block Into Current Master / Detail Form
Jun 10, 2013
I got the following scenario.
- A Master/Detail form which is called from previously saved table.
- In the detail form, user is allowed to insert list of data from other block into the current detail form. For that I have one when_button_pressed with the following script define :-
Begin
go_block('ACT_VW_QT_ACTV'); <----- query block
FIRST_RECORD;
IF :BLOCK44.ITEM45 IS NOT NULL THEN
:BLOCK44.ITEM45:=:BLOCK44.ITEM45|| ' OR ';
END IF;
[code].......
When this is none, nothing being happened on the current block ( 'ACT_QT_TXN1'), I think it is because of the master/detail link where it always looks back the original link data. I think this is very common problem but I just can't figure out how to go about it.
I have a master - details block relation where I have to display all the records in the details block based on the selection criteria made in the master block. Earlier we didn't have any selection criteria and hence used to do a execute_query behind the detail block to just retrieve all the records.
But now the master block contains fields where I can input the selection criteria and once I hit the find button it will retrieve the records based on those criteria and display in the detail block.
I have a Oracle Form which has 2 blocks, master and Detail.I have a pre-Insert Trigger on master block which has a sequence that acts as the id of the primary key column. Now, when I populate the master block and dont save then go to detail block and save(after populating detail block's data) it gives me an error that can not insert null into detail block foreign key column.I understand that his is happening because in the above scenario pre-insert is not firing for the master block.Am I writing the the sequence generation code in a wrong trigger?
i have a master detail form, In Master block we have one field cheque amount and in Detail block we have field receiveable amount invoice wise. if company paid us a cheque amount we will enter this amount in Master block field Cheque amount and in detail block there will be invoice wise receivable amounts. i want to distribute the cheque amount in detail block invoice wise for example
Cheque amount in master block = 291
Invoice wise receiveable amount is as follows
Invoice No , receivable amount , Received amount
10, 196 , 0 20 , 95 , 0 30 , 54 , 0
Result should be as follows:
Invoice No , receivable amount , Received amount
10, 196, 196 20 , 95 , 95 30 , 54, 0
Received amount field should be distributed according to the receivable amount when recevied amount = cheque amount then remaining will be 0.
I created a master-detail form using wizard in oracle apex 4.2 Now I want to attach an LOV to one of the items of detail form, which is visible on the same window as of master form. To do so, I need to first find the item in detail page, details of which are not available in page definitions. I can see all the items of master form but none for detail form in "Page Rendering" section.
we have two tabular block first one is master and sencond one is detail when we insert detail item it proper work and when when move next record in master block then it ask for save, I want to user enter all record and when he save with button then it save other wise no. but when he move any record in master block all realted record show in detail block.
I have a master detail form. I have one column in master, which is a free text field and one in detail block which is a LOV. When I enter data in the master block and select say A,B,C records in LOV in detail block and saved it. These A,B,C records in LOV shouldn't appear in the detail block when a new record is entered in the master Block.
I have problem with the form when i pass from the master to detail block the form stop working and it stops responding even if i am in the next detail block and i press tab to change from one record to another the form will say working and it stops responding.
I have a master-detail form, before filling up all the item in master cursor should not go to details, if user clicks in detail he should get a message.
When I am pressing ENTER to navigate from one item to another is asking'do u want to save the changes'.how to control this message and when pressedenter cursor should go to next item.
MASTER-DETAIL FORM HAVING AN LOV IN THE MASTER .LOV SELECTS THE PRIMARY KEY FIELD FROM THE MASTER TABLE AND IN LOV PUSHBUTTON HAVING A TRIGGER WHEN BUTTON PRESSED
Declare bool boolean; begin bool := show_LOV('PURCHASELOV');
[code]...
WHEN SELECTING THE ITEM THROUGH LOV IT EXECUTES ALL VALUES BUT AFTER CHANGING ANY DATAS THEN NEW RECORD IS CREATED IN THE MASTER TABLE AND NO CHANGES OCCURED TO THE CHANGED RECORD.
I have to date field in detail part of master detail Form. In detail part i have field of From_date and To_date. I want when i go to next record in detail part ,,,from date is initiaze by previous to date+1....eg.like
1.record: From date=01-jan-2011, To_date=10-jan-2011 2.Record: From_date = 11-jan-2011;
I have Attached calender to two feild...and calender is the different block... In Detail block when_record_instance i handled the;; From date=previous to-date +1;
but when i double click the feild calender is open and when_new_record trigger is fired agian. calender called ...the when_new_record is not callled .....
I have a contact table that will be used for more than one entity (Customers, Sites, Suppliers, etc.) Using APEX, when we define the master-detail, we need to add a FK to the Detail table -- otherwise the Master-Detail Forms can not be implemented.
I am looking for a way to defined/implemented tables so that I can utilize the same table (Contacts) for more than one Master-details relationship.
I have created a master-detail form. The detail columns are created as report columns instead of getting created as Items. I need to make a column non-editable.
I have created a master detail form , in which many validation etc is done ,the MASTER is a FORM and DETAIL is a REPORTNow I am stuck up with the detail region .i.e reportI have Line Detail where there are ITEMS such as SL NO:
,ITEM_ID , UOM ( Unit of measuremnt ) etcNow here is where
Using POP UP LOV i have managed to fetch in LOV for the item "ITEM_ID",---
i can select an item name using the pop up LOV ,Now all that I want is when I select an item name from the pop up lov , an Item Id is displayed or fetched in that particular place , now i want the corresponding UOM to be diaplayed ( i.e the UOM for that particular Item Id which has been selected by me from the pop up lov ).
In order to resolve this I created a Dynamic action where in I get the UOM . Bt the problem is that the ITEMS displayed for selecting in the WHEN section (DYNAMIC action-IDENTIFICATION section-WHEN section----- items ( here i am not listed with ITEMS of the REPORT region instead ITEMS of the MASTER is available )-TRUE ACTION section etc is only theITEMS of the MASTER region ..
I have a form that contains a tab canvas. On the second canvas page I have two data blocks with a master detail relationship.The first block (master) is driven by a table (table_one) with the following fields:
The second block only shows error_code and error_code_desc. The point of this canvas page is to add/remove master records and associate detail records with a master. I never want to actually insert or remove records from table two; merely updating the sf_id column in table two.What I am trying to achieve is the following:
1. Create a master record with detail records at the same time. 2. Delete a master record 3. Add and remove detail records
An insert into the detail block is nothing more than associating a master record with a detail record by updating the sf_id column in table two. A delete from the detail block is nothing more than setting the sf_id column to null in table two. I am not actually adding or removing records in table_two.
I have tried overriding the commit on the second block to perform updates instead of Oracle actually trying to insert NEW records into table_two.
I'm designing a canvas which will open up on the click of a push-button from a form A. Now this form A has a data block(ie. single underlying table A).
I want to display data from two tables - Table B and Table C in this canvas in the form of a multi-record grid structure - one below the other i.e. table B data above and table C data below.
Now table B and table C share a PK-FK relnship between them. What I want is when a user clicks on a record in the table B above then the corresponding records in the table C should get displayed below(now there can be multiple detail records in table C for a single record in table B - PK-FK reln)
i'd written code something like this in the When-button-pressed trigger:-
c_where_clause := ....(query from Form A) set_block_property('block B',default,c_where_clause); go_block('block B'); go_block('block C'); execute_query; first_record;
(in addition to the above trigger, I have also included queries in the post-query trigger of the two tables B and C to get some data populated in the non-database fields in this canvas)
do i have to do add a piece of code to loop thru the records...like checking for last record,if not going to the next_record and so on for both the blocks?
I have created a simple master/detail form which is in easy navigation for user. The form have master/detail block with tabular style showing 5 records, When user click on master record the detail will show the opposite as master record point.
On a form I have 2 blocks, shown on different tabs. Relation created by forms wizard. The relation works great when navigating through the blocks, the details for the master are shown fine.
Example for this form is master block is a type of food. Detail block is list of ingredients.When creating a new type of food, if it's = CAKE we insert records based on a select on another table into the ingredients table.Else, the user has to manually create the ingredients.
Upon commit of the form on master block (must be saved to enable detail block tab), the ingredients are not displayed but are there. If I execute query by hitting F8, the records are present.
Why is the populate-details trigger not being fired or what am I missing?
I have FORM_A calling FORM_B: Call_form('FORM_B',...). On form_B I am updating a Record and when I close Form_B and the focus goes back to Form_A, I need to Automatically Reload Form_A to reflect the changes that were made on Form_B.
How can I reload the Calling Form (FORM_A) when I closed the called form (FORM_B)?
I'm trying to change the attributes on a display where the info is gathered via a routine that fills the data block with info. I've searched and tried using 'set item instance property' in several places within the data block using different triggers but still doesn't work.
No errors are encountered or shown. Attributes aren't changed based on a small test condition.
I created one table with out primary key like well_1 .in that table have have more than 30 columns.
SQL> select uwi,analysis_obs_no,fluid_type,top,base,date_sampled from well_1 2 where uwi ='1000 and base =2871.5;
UWI obs_NO F TOP BASE ---------------- ---- ------ ----- - ----------------------------- 1000 1 G 2870.5 2871.5 1000 3 G 2516 2871.5 1000 4 G 2870.5 2871.5 1000 2 G 2870.5 2871.5 1000 6 G 2516 2871.5 1000 5 G 2516 2871.5 1000 7 G 2516 2871.5 1000 1 L 2516 2871.5 1000 2 L 2516 2871.5 7 rows selected.
i did code like this in from in search panel. in taht form i will enter uwi and base values and iwill click search button.then it will display all record values in master block .after taht i will click next button then it will display next values(all values).
i am getting all values (1 G to 7 G values).but iam not getting last 2 records when i click next button (1 L to 2 L values ).
next button
select analysis_obs_no,fluid_type into :ctrl1.OBS_NO,:ctrl1.fluid_type from well_gas_anal where analysis_obs_no =(select min(analysis_obs_no) from well_gas_anal [code].....
i tried in SQL*PLUS like this :
select rowid,analysis_obs_no,fluid_type,rownum 2 from well_gas_anal 3 where rowid=(select min(rowid) 4 from well_gas_anal 5 where analysis_obs_no > &a 6 and uwi ='1000' and base =2871.5 ) 7 and uwi ='1000' and base =2871.5 8* and fluid_type is not null SQL> /
I have an existing form which i need to customize..In the form in the query block whatever strings we enter..and press the search button..it sets the where clause and use execute query.which populates the detail block which is read only and only 1 column is enabled.
For the Enabled column X I need to enable a button.It has to be done only if the cursor go in the column X
