RAC & Failsafe :: Oracle 10g RAC Install On OEL5 Update 5 OUI Failing To Write On Tmp Filesystem
Nov 15, 2010
I am attempting to install Oracle 10g R2 on Oracle Enterprise Linux 5 update 5 but facing some errors. Can't believe i have done everything right as far as oracle docs n my understanding concern. when i try to invoke runInstaller for CRS it fails with following error:
------------------------------
[oracle@server01 clusterware]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-15_04-36-47PM. Please wait ...[../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar may be a plain executable, not an archive
Error in writing to directory /tmp/OraInstall2010-11-15_04-36-47PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
[oracle@serverr01 clusterware]$
--------------------------------------------------
I am also attaching the cluster verfication result, if you wish to have a look at this.
View 35 Replies
ADVERTISEMENT
Feb 7, 2011
I am configuring RAC with two nodes. I have mapped iscsi targets successfully. I am unable to mount the ocfs2 filesystem.
mount -t ocfs2 -o datavolume,nointr -L "oracrsfiles" /u02
When execute the above command, it displays the follwing error:
ocfs2_hb_ctl: Device name specified was not found while reading uuid
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
View 2 Replies
View Related
Aug 3, 2012
we have RAC database on two node here on windows server 2008 unfortunately today morning my one my one node os crash its on windows server 2008 my other node its working ok so my database is accessible so i just want to ask if i install again this os on node -1 system so i just want to install only again crs only.because my database is accessible through my other node-2
View 6 Replies
View Related
Mar 13, 2012
Can I achieve the merge (update-only) and delete in a single SQL statement?
merge into table_4
using
(select table_3.col1 col1,table_3.col2 col2,
from table_1, table_2, table_3
where
[code].....
delete from table_3 where <records identified in the 'using' clause of above merge>;
i.e.
delete from table_3
where (table_3.col1,table_3.col2)
in ( select table_3.col1,table_3.col2,
from table_1, table_2, table_3
where
join conditions.....
other conditions ....
group by table_3.col1, col1,table_3.col2
having count(*) >1 );
What I want is roughly as following :
WITH mywith as ( select table_3.col1,table_3.col2,
from table_1, table_2, table_3
where
join conditions.....
other conditions ....
group by table_3.col1, col1,table_3.col2
having count(*) >1 )
update table_4 set col3='N' where table_4.col1=mywith.col1 and table_4.col2=mywith.col2
delete from table_3 where table_3.col1=mywith.col1 and table_3.col2=mywith.col2;
View 5 Replies
View Related
May 7, 2011
I am currently in the favorable situation in which I have excess amounts of memory available on the database server - a single node setup. The server only serves the single instance and no other processing. Database size is around 2.3tb and memory is 50gb. For the majority of processing, AIX is allocating a significant amount (anywhere from 30-40%) of the memory to the AIX file system cache (persistent pages).
I've been trying to find documentation about this, but have not had any luck yet. My guess is that it would be better to allow Oracle to cache this data - meaning increase the SGA target and max size to allow for a larger buffer cache. However, the nice thing about the AIX cache is if process memory is needed, the file system cache gives up pages. If the memory was allocated to the SGA, its pretty much locked in.
I have read several articles stating that a larger buffer cache is not always better, as a larger cache takes more management. But having both of the caches active seem to be a waste of memory, effectively storing the data twice - once in AIX persistent pages and a second time in Oracle database buffer cache.
View 4 Replies
View Related
Mar 8, 2012
I have been given a task to produce an ad-hoc report based on the following conditions (I will give you the structure of the table and details in the table below the requirements)
Requirements: Adhoc Report for Audit on CIT Income Allocation
1. Select from the RETURNS table:
•Id > 3600000 and
•Prog_program_cd = '01' and
[code]...
3.If there are multiple entries from the same account and tax year, only retain the latest record: From the records selected in step 2, if there are multiple records with the same Acct_Id and Period_end_date, only retain the record with the most recent Status_date (i.e. MAX value on the date).
4. Using the results from step 3, link to the applicable RETURN_LINE_ITEMS table where:
•RETURNS.Id = RETURN_LINE_ITEMS.Rtrn_Id
5. From the selected return on RETURN_LINE_ITEMS table, retrieve records where (value on Sch 000 Line 062 > 500,000) and (value on Sch 000 Line 066 < value on Sch 000 Line 062) :
•Sched_nbr = '000', and Litm_line_item_nbr = '062', and Active_ind = 'Y', get Revise_val_amt as 'ab_taxable_income'
•Sched_nbr = '000', and Litm_line_item_nbr = '066', and Active_ind = 'Y', get Revise_val_amt as 'amt_taxable_in_ab'
[code]...
So when you run the scripts above, the tables are created (I have tested it in TOAD) Now let's feed data into both the tables
RETURNS table:
insert into RETURNS
VALUES
(3602448 , '01' ,288151,3876821,9345370 , 403232531, 1, 'TAXPAYER' ,12/4/2008 ,'N', 'Y','N','ASSESSED', 2/18/2009,'SANDEEP',1/2/2008,1/2/2009,
'PRINTED','2/18/2009, 6043073664,'PAPER', 'NOTICE','N');
[code]...
View 15 Replies
View Related
May 11, 2013
I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
OS : SOLARIS SPARC
ORACLE - 10G
Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
Below Script i am using
===============
exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query="WHERE E3RECV_DT LIKE '201305\%'" log=PGTB_IFDATA_conditional.log
View 1 Replies
View Related
Aug 29, 2012
how can I connect via ftp to the xmldb-filesystem ?
I tried the instructions from this website [URL] ..... Now I can connect to the filesystem via "win7 shell ftp", but i cannot connect via "win7 explorer" using "ftp://host:port/foo/bar" or filezilla. Everytime i try i got an errormsg like:
filezilla: cannot read filesystem
and
win7
an error appears :
detail:
200 Type set to A.
277 Entering Passive Mode.... see sreenshot -> [URL]
View 2 Replies
View Related
Mar 3, 2011
I am attempting to read from the maillog of our server, but I wish to make as few changes as possible for fear of blocking other systems access to the file.
I was initially going to call create directory maillogs as '/var/log/maillog' and then drop directory maillogs; when I was done but I found my user does not have "create any directory" permissions.
Rather than compromise security of the existing database configuration, I thought I would permanently add the maillogs to the list of available data directories. Are there any implications to the filesystem if I do this, or should I be able to add this without consideration of affects.
Understand that I will only be opening the file for (R) READ TEXT access only.
Primarily I am concerned that Oracle (in the background) will keep a file pointer open or something of that nature that would block other programs from writing to the file even after I close the file pointer. I want to make as little impact as possible to the file system.
View 4 Replies
View Related
May 1, 2013
I have got backup pieces in ASM, I guess about more than 100 files. Now, I need to copy all of them from ASM to FileSystem, there are 2 methods still now:
1- Copy from ASM to FileSystem using cp command.
2- Copy from ASM to FileSystem using DBMS_FILE_TRANSFER.
But:
In the first method, when I copy one file, I took more than 1 minute, so the following script would take me more than 1 days (I guess so).
#!/bin/ksh
#
# This script copies files from FRA on ASM to local disk
#
ORACLE_SID=+ASM2
ASMLS=/vasgatedb/app/vsgbkp/asm_ls.txt ##{ASM files list}
[Code]...
The second method, DBMS_FILE_TRANSFER took me less than 1 second to copy one file completely.
sys@VSGDB> set timing on
sys@VSGDB> exec dbms_file_transfer.COPY_FILE('asm_dir','level_0_vsgdb_9998_813844797.bkp','fs_dir','level_0_vsgdb_9998_813844797.bkp');
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.38
Of course, I wish I used the second method as soon as possible, however, said I below, I've got about ~200 files, and I could not copy one by one file.
View 3 Replies
View Related
Aug 27, 2012
I am using Oracle 11.2.0.3 RAC (2 nodes) + ASM on AIX 7.1
I am backing up my Oracle database through RMAN to ASM disk groups..I have a requirement to backup also to an OS file systems. So what I did that I mounted an NFS across the 2 nodes of my RAC database.I am running backup from node 2 only.My issue now is that I am facing a real performance issue when backing up to NFS.My question is there any way to take an RMAN backup to local file system on node 2? or in other way what are the options to take RMAN backups to an OS file system?
I tried to copy from ASM to OS file system but i was advised to backup to file system using the format command.what should i do in such case? since I am facing performance issue to backup to NFS.
View 8 Replies
View Related
Apr 8, 2009
I just install the oracle g10 on my laptop, which runs windows XP and it seems to work fine BUT it will not allow me to write Scripts I go to the Script Editor, i can write on the "Script Name" but below i cant ever put the cursor to write the script!
View 3 Replies
View Related
Apr 12, 2011
I am using SQL*Plus to run this Oracle10g. Here is my problem I have to solve: After a new record is added to the task table, write a trigger that reports the new project balance to the user while updating the customer balance to reflect this additional task cost. Insert a new record to show the trigger works. I somewhat understand triggers,I think I have to combine tables to solve this. Here are my tables/attributes I can use to solve it:
CREATE TABLE customer
(
custnoNUMBER(3)CONSTRAINT ccustpk NOT NULL PRIMARY KEY,
custname CHAR(20) CONSTRAINT ccustnamenn NOT NULL,
phone CHAR(12),
curr_balance NUMBER(9,2) CONSTRAINT ccustbalancenn NOT NULL
[code]...
View 8 Replies
View Related
Sep 25, 2013
I have a procedure in mysql that need to be converted to oracle.I tried to convert it ,everything looks good except the function LAST_INSERT_ID().
mqsql procedure
DELIMITER ;;
CREATE DEFINER=`root`@`localhost` PROCEDURE `add_ac_message`(
IN in_process_run_id INT,
IN in_processID INT,
IN in_messagename VARCHAR(25),
IN in_message VARCHAR(200))
BEGIN
[code]......
oracle procedure
create or replace
PACKAGE body Mysql_To_Oracle
IS
Procedure Add_Ac_Message(In_Process_Run_Id In Number,
In_Processid In Number,
In_Messagename In Varchar2,
In_Message In Varchar2)
[code]....
Error:
ORA-00904: "LAST_INSERT_ID": invalid identifier
00904. 00000 - "%s: invalid identifier"
View 6 Replies
View Related
Aug 31, 2011
I am oracle 10g grid control.
I have a requirement where I have to generate monthly filesystem usage report(graphical) in an automated fashion,I checked the built in reports from the grid control 10g but not able to find any thing....
View 1 Replies
View Related
Jul 1, 2012
What is correct way to move the default oracle spfile to ASM diskgroup so i can successfully bring up the instance . After bring up the instance , it should point to ASM diskgroup. My oracle database 11.2.0.3 is siting on sun solaris 64 Bit.
View 8 Replies
View Related
Oct 15, 2013
There is a question come up in my mind that can we perform the copy/delete/move of ASM files to the host filesystem while the ASM instance is down. For instance... To copy the file ASM file through AMCMD utility when the ASM instance is running.
ASMCMD> cp spfilenode.ora /u01copying +DATA/NODE/spfilenode.ora -> /u01/spfilenode.ora
Now my question is, Can I copy/delete/move that file on OS filesystems when the ASM instance is down.
View 3 Replies
View Related
Dec 14, 2010
I Would like to delete a records based on the parent / child relationship. So I would need to delete a record from parent table , first delete inner most child record then other child then master. To write generic way of Oracle 10g PL/SQL code.
View 2 Replies
View Related
Sep 26, 2012
I have Oracle 10g. In a table with just one record there is a clob with the following xml. In the following clob, there could be any number of Emp elements.
<?xml version="1.0"?>
<ROWSET>
<Emp>
<ENAME>SMITH</ENAME>
<EMPNO>7369</EMPNO>
<SAL>800</SAL>
</Emp>
<Emp>
<ENAME>ALLEN</ENAME>
<EMPNO>7499</EMPNO>
[code]...
I want to write a select statement which gives me result as follows (all ENAME and EMPNO from the xml)
ENAME EMPNO
SMITH 7369
ALLEN 7499
WARD 7521
View 4 Replies
View Related
Feb 23, 2013
How to write to text file using oracle? And how do I handle spaces/next line? (i was trying to use spaces(ch(32)), however it is just converted into squares in the text file.)
View 5 Replies
View Related
Nov 16, 2011
I have a file studnet.txt in following order
JAMs|1231|PHYSICS
SAM|1232|PHYSICS
ALI|1233|CHEMISTRY
I want to read and write data from a file in | seprated mode. file READ and WRITE using Oracle Forms6i. I have a knowledge of file handling in C++ but not use it in Oracel Form before this.
View 5 Replies
View Related
Sep 27, 2013
I would like to connect to oracle database and would like to execute series of SQLs and write those SQL results into Excel file (sheet1).
my requirement is simple :
------------------------
db_user_id scott
db_user_pwd tiger
db_sid orcl
select count(*) from emp;
select count(*) from dept;
print the same SQLs in A column and result should be in B column in excel file.
column A column B
select count(*) from emp; 14
select count(*) from dept; 4
thats it.
View 1 Replies
View Related
Apr 24, 2010
I have to create a new window in a newly developed forms 6i (in Oracle e Business Suite 11i).
This new window is to duplicate the Oracle standard alert systems. I have to create a new one to match the style classes of the other windows in the developed forms. Actually, I did not manage to change the oracle alert I used first, to match fonts, colour and sizes defined in the customised class. Thus, I decided to create a new window and canvas.
It has to display a confirmation message with 2 buttons: OK, Cancel. This window contains a canvas displaying a confirmation message, and 2 buttons : Ok, Cancel attached to my data-block. I manage to show this window, with a show_window command, called from a button on the previous window's canvas.
I do not manage to hide this new window, and to come back to the previous one, when I click on Cancel button. The window does not hide.
View 8 Replies
View Related
Jan 25, 2011
In TOAD,I see one of my jobs is failing several times. However, I could refresh it manually.I found the following error. What is the cause of error and the way to rectify this.
ORA-23404: refresh group "ORA-23404: refresh group "schema_name"."job_name" does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.DBMS_REFRESH", line 23
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
"."" does not exist.
View 4 Replies
View Related
Feb 25, 2012
how to install oracle on Linux.
View 2 Replies
View Related
Mar 11, 2004
I wanted to install oracle 9i in windows xp.My configuration is intel celeron,2.5ghz,256 mb ram ,5.5 gb of free hard disk space.I do no anything about the oracle ,was trying to install oracle on redhat 9 but had some problems..I just wanted the step by step documentation of installing oracle 9i in xp.
View 2 Replies
View Related
May 26, 2008
I install oracle 10 g but I don't remember password . so I then remove oracle 10 g by select Universal Installer and click Deinstall and then reinstall but I can't reinstall because I don't remove/delete oracle_home I then delete folder in path C:Oracle and reinstall Question
1.in this remove oracle 10 g method true or wrong if wrong , How effect on my computer
2.why after reinstall my computer is very slow.
View 5 Replies
View Related
Sep 7, 2010
I've dual booting (Ubuntu and xp). I've already installed oracle 9i in xp. And planning to install 10g in Ubuntu soon.
1) How to check the os block size whether it is 32 or 64bit before installing 10g on XP?
2) (eventhough not necessary) is it possible to have 9i and 10g in a same XP platform?
3) Can I change the bit size between 32 and 64 bit while installing a new oracle software?
View 2 Replies
View Related
Nov 1, 2010
I have dell inspiron 15R model N5010 laptop, I have windows 7 64 bit operating system, intel i5 processor, 4 gb ram,500gb hdd. how does install oracle 10g in my system.
View 1 Replies
View Related
May 2, 2013
Caused our sql 8i not install 100%, while we are using windows 7.
View 2 Replies
View Related
