we have RAC database on two node here on windows server 2008 unfortunately today morning my one my one node os crash its on windows server 2008 my other node its working ok so my database is accessible so i just want to ask if i install again this os on node -1 system so i just want to install only again crs only.because my database is accessible through my other node-2
View 6 RepliesI am attempting to install Oracle 10g R2 on Oracle Enterprise Linux 5 update 5 but facing some errors. Can't believe i have done everything right as far as oracle docs n my understanding concern. when i try to invoke runInstaller for CRS it fails with following error:
------------------------------
[oracle@server01 clusterware]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-11-15_04-36-47PM. Please wait ...[../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar]
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
note: ../stage/Components/oracle.swd.oui.core/10.2.0.1.0/1/DataFiles/filegroup1.jar may be a plain executable, not an archive
Error in writing to directory /tmp/OraInstall2010-11-15_04-36-47PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
[oracle@serverr01 clusterware]$
--------------------------------------------------
I am also attaching the cluster verfication result, if you wish to have a look at this.
i took the backup database with dump file.. today morning database is crashed but i have only yesterdays backup dump file. How can i recover the full database?
View 3 Replies View Relatedhow should i get DBID to recover my database after server crashed to restore it on new host.
i have only:
1) controlfile autobackup was on so i have control file and spfile.
2) copy of recent backup including archivelog files.
to restore and recover database with same name on new host i need to set DBID , then how should i get it?
I try to install RAC with 2 nodes OEL 5.8.
GI 11.2.0 is installed...The installation of the database crashed in dbca.
When I tried to rerun, I got: PRCD-1121: Speciffied server pool RAC for RAC is already hosting an administrator-managed configuration for database(s) RAC
I am the only DBA in my company and Oracle just crashed on me. The data is corrupted as well as the data on my backup! Is there ANY way I can get the information back?
View 2 Replies View Relatedhow will you find your db is Corrupted or crashed. how will u recover it.
View 2 Replies View Relatedi need to upgrade this version to 10.1.2.3, and i don't have an account in metalink to download the patch.
View 11 Replies View RelatedMy system crashed .
I have an application on the server .
I have installed oracle 10g .
how I can dump the database into my PC to test it , and enhance it.
Backgroud info:
host server crashed.
Database was not cleanly shutdown.
Database is not in archivelog mode.
Datafiles were saved.
My goal:I want to recover the database based on the available files.
My approach:
Install new database.
ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
shutdown database.
Place available dbf files in the location for new database, replacing existing files.
edit trace file to create new controlfile. Script is:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "newdatabase" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
[code]....
I installed Oracle Express on my Windows 2003 Enterprise server. And right off the bat I cannot connect to it via command line. I have googled and read many sites, but am still getting the same error, no matter what I do. I am newbie again (was a DBA in 1990...when I used to have the same error and fix it in seconds...not sure why this problem still lingers in Oracle) so most likely I am overlooking something. Below are my tnsnames.ora and liserner.ora files.
tnsnames.ora
CODEXE =
(DESCRIPTION =
[Code]....
I am having a rough time trying to install Oacle 10.2.0.3.0 on Z/OS 1.7.
Since my installation does not allow us to use X Windows nor Telnet, I have been forced to try to install using a silent install response file. The install does not seem to get very far and throws out an informational message, but no actual errors. All this is being done via OMVS on USS (UNIX system services).
The message I am getting is:
INFO: INFO: Unable to read the list of homes from the inventory.
I think it may be a permissions issue, and the support people are pursuing this avenue as well, but so far, no concrete answers.
I execute ./runInstaller -silent -responsefile <my responsefile.rsp>
The above INFO message comes out.
The user I am logged in with has the following:
uid=1212 (HPCGBE) gid=101(OINSTALL) groups=102(ORADBA)
One problem is that there is a superuser account called BPXOINIT that is the group owner on some of the directories that I need to access:
uid=0 (BPXOINIT) gid=1(BPXOINIT) groups=101(OINSTALL),102(ORADBA)
how to install oracle on Linux.
View 2 Replies View RelatedI wanted to install oracle 9i in windows xp.My configuration is intel celeron,2.5ghz,256 mb ram ,5.5 gb of free hard disk space.I do no anything about the oracle ,was trying to install oracle on redhat 9 but had some problems..I just wanted the step by step documentation of installing oracle 9i in xp.
View 2 Replies View RelatedI install oracle 10 g but I don't remember password . so I then remove oracle 10 g by select Universal Installer and click Deinstall and then reinstall but I can't reinstall because I don't remove/delete oracle_home I then delete folder in path C:Oracle and reinstall Question
1.in this remove oracle 10 g method true or wrong if wrong , How effect on my computer
2.why after reinstall my computer is very slow.
Can I install the oracleASM in centOS 6?
My kernel version is 2.6.32.
And the last version for oracleasm release is 2.6.18-308.1.1.el5. [URL] And they aren't compatible...
Are there any way to install these lib with this kernel version? (2.32...)?
Is it possible to install 10gr2 in windows 7?
View 12 Replies View RelatedI've dual booting (Ubuntu and xp). I've already installed oracle 9i in xp. And planning to install 10g in Ubuntu soon.
1) How to check the os block size whether it is 32 or 64bit before installing 10g on XP?
2) (eventhough not necessary) is it possible to have 9i and 10g in a same XP platform?
3) Can I change the bit size between 32 and 64 bit while installing a new oracle software?
I have dell inspiron 15R model N5010 laptop, I have windows 7 64 bit operating system, intel i5 processor, 4 gb ram,500gb hdd. how does install oracle 10g in my system.
View 1 Replies View RelatedCaused our sql 8i not install 100%, while we are using windows 7.
View 2 Replies View RelatedOracle database 10g Express Edition...I need to install "Oracle database 10g Express Edition" with different database name example dev but it is taking default name that is XE and there is no option come during installation where i can put the name of database as per my desire.
And also explain why we use "Oracle database 10g Express Edition" instead of Oracle database 10g. what is the meaning of Express Edition.
, We are doing a fresh setup on new hardware. On the old hardware Oracle is installed on the SAN and all data files are on there as well. Our new blades are Dell M620 with 2 mirrored 500GB drives and our SAN is Dell Complaint Storage and Complaint TLS Controller. The SAN uses hybrid SSD storage so it keeps the most used data cached.
I'm feeling it would be best to install the Oracle Server on the SAN. On top of that we have a single 620GB fusion IO NAND flash card in the mix. I am still researching the configuration of that.
I need to build a new server for my Oracle 10gR2 due to compatibilities with the new storage system that we have purchased, this server will run RHEL5 x64 and will replace a RHEL4 x64. Since doing an upgrade poses greater risk as the upgrade may fail, I am thinking about building a new server with RHEL5 x64 doing all the config/tuning and then simply running the same Oracle installation (after a full backup) which I was running on the RHEL4 x64.
For this to work I will just need to mount the SAN drives on the new server but and this may be a big but, considering that some versions of some libraries will change do I need to relink anything in my Oracle? I have never manually relinked anything but Oracle may have done so during the initial install.
I'm trying to install Grid Infrastructure for Oracle RAC 11g. I followed each step of pre installation tasks, but when I run run Installer it blocks without any error message.
What I see on my shell is this:
./runInstaller
Avvio di Oracle Universal Installer in corso...
Verifica dello spazio Temp: deve essere maggiore di 120 MB. Effettivi 17276 MB Superato
Verifica dello spazio di swap: deve essere maggiore di 150 MB. Effettivi 23999 MB Superato
Verifica del monitor: deve essere configurato per visualizzare almeno 256 colori. Effettivo 16777216 Superato
Preparazione per l'avvio di Oracle Universal Installer da /tmp/OraInstall2012-01-11_03-35-57AM. Attendere...[oracle@ssts2cora1 grid]$
Everything seems ok. But the window of oracle installation does not appear. The java process is active:
[oracle@ssts2cora1 grid]$ ps -ef | grep java
oracle 4553 1 0 03:35 pts/0 00:00:00 /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/home/software_ssts/grid/install -Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.prereqConfigLoc= -Doracle.installer.unixVersion=2.6.32-100.34.1.el6uek.x86_64 -mx150m -cp
[code]....
but it does nothing!! Nothing appears to me. I attach the log file generated by the installation process.
Using paramFile: /home/software_ssts/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 17276 MB Passed
Checking swap space: must be greater than 150 MB. Actual 23999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/home/software_ssts/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-01-11_03-35-57AM
Verr� utilizzato il valore di umask '022' disponibile in oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/home/software_ssts/grid/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre
[code].......
Ar you have manual to install oracle forms and reports on windows seven
View 2 Replies View RelatedI need steps to install Oracle R12 on my Windows computer.
View 1 Replies View RelatedI just installed WEBLOGIC server on linux with oracle forms 11g builder and report builder on the server.
On the client machine , i have probleme to intsall oracle forms 11g , in one of the steps it asks me to enter the absolute location of server weblogic , i enter the location of the weblogic on the server , but it dosent' work. is it mean that i have to install the weblogic on the client machine too!! if not to install forms builder 11g on the client
Is oracle 10g availble for Windows 7, I downloaded oracle 10g from ORACLE'S website. The name of the file is "10203_ vista_ w2k8_ x86_ production_ db.zip" but when I m installing it, I m getting error at the very beginning regarding the system requirements failure.
below is the message which i receive at the PRODUCT-SPECIFIC PREREQUISITE CHECK
======================================
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
[code]....
that windows7 will support oracle 11g and oracle 10 g
View 1 Replies View Related I am trying to install oracle database 11g.2 on windows 7. bu I received error in configuration database step.error is attached to this topic. installed database on windows so far.the emca text is below .....
-----
@echo off
setlocal
set OH=E:appproduct11.2.0dbhome
set JRE_JAVA=%OH%jdkjreinjava
[code]...