My database 11G having Nls_characterset WE8MSWIN1252, I want to store some hard coded unicode values that is in arbaic words in NVARCHAR2 Column using sql query like
insert into mytable
select 'unicode values' from dual ;
But it does not store them properly ,
how can I convert incorrectly imported data into it's proper unicode format.
example:
FULL_NAME
GöRAN JOHANSSON
GÖRAN JOHANSSON
The first record is incorrectly imported and the second is how it should be looking like, if it has been properly imported.
NLS parameters are:
NLS_CHARACTERSET: WE8MSWIN1252
NLS_NCHAR_CHARACTERSET: AL16UTF16
In the example above, full_name is of a NVARCHAR2(100) type but the same problem applies to columns with VARCHAR2 type.
Is there a function or a peace of code I could use to convert value of the first record to be look alike of the second record?
let me know if there is a function in PL/SQL to convert the unicode code to it's character, I have unicode code returned for example '%C3%A9' and would like the function to return 'é'.
View 7 Replies View RelatedI need to configure character set for my database. I have 2 options:
AL16UTF16 - require 2 bytes per character (fixed length)
UTF8 - character length - 1 until 4 bytes. (variable length)
until here ok...
The AL16UTF16 certainly will occupy more space than UTF8. So my question is, When would I need use AL16UTF16 character set mode?
I hear one time, when a database write many values with the same length. it does it in the same HD cylinder. So the HD arm could with a single movement read all the fields in cylinder completely. Improving the read/write performance.
I have a varchar field in a table. When I store the following string, some undefined character is storing.
String to be stored: Test String
String actually stored: Test ¿ string
Please note that here '' is not Hyphen. It is a special character that msword has. when you copy this and paste in a word document you find the difference.
I have listed the character set for CHAR and NCHAR from NLS_DATABASE_PARAMETERS
NLS_CHARACTERSET - WE8ISO8859P1
NLS_NCHAR_CHARACTERSET - AL16UTF16
I am using 10g Database and 10g forms/reports on Windows.
NLS_LANG = AMERICAN_AMERICA.AL32UTF8 for both database and forms/reports. I set this from REGEDIT.
I want to use, Arial Unicode Ms or Mangal font to add or view the data in MARATHI (Regional).In the database browser, I can see the ported data properly with these two fonts, but through form if I try to add then it not showing proper characters, it showing squraes instead of typed characters.
I also typed a label in the form, at design time it showing proper word, but at runtime it not showing proper letters. This I observed only for joined characters.If I generates the report in PDF, format then it not showing data properly. but in runtime it showing properly.
How to write code in unicode/utf8 and used non-english variable written in different cases?The compiler is supposed to be case-insensitive. I just wonder how it handles case insensitivity for unicode or ut8 encoding.
View 7 Replies View RelatedI want to convert my database characterset from WE8MSWIN1252 from any UNICODE, because i have to transportable tablespace to the destination, the destination is unicode and source is WE8MSWIN1252. While importing transportable tablespace i was not able to do because of this reason, so i want to convert lets say source from WE8MSWIN1252 to unicode.
View 7 Replies View RelatedI have a report that use &totalpages. output PDF, font unicode is error (Mã) but two last page's font is OK (Mã).
View 2 Replies View RelatedI have this table :
column1 column2
--------- ---------
value1 value2
value1 value3
value2 value4
value3 value7
value7 value1
value8 value9
What I was trying to retrieve is something like that:
Quote:
output_column
---------------
value1, value2, value3, value4, value7
value8, value9
I don´t care about the order of the values in the row. In other words, I want to get disjoint sets of data connected by any of both values.Every pair in the input table is unique.
I have seen in the web that it is possible to do using connect by and hierarchical retrieving but I've been trying to make a lot of combinationts and I can reproduce the output.
whether Oracle has any capability of automatically checking which lossless compression algorithm it should apply by analyzing a data stream on data load? Does Oracle have any compression advisors/wizards that would make recommendations as to type and level of compression?
View 3 Replies View RelatedWe have been recommended to store data in CLOD data type.
Sample data: 1:2:2000000:20000:4455:000099:444:099999:....etc it will grow to a large number.
We want to create a Unique index, for functional reason. Is it advised to create a unique index on a CLOB datatype?
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I have few tables in Oracle 9i/10g , and they already have data in them. I am trying to migrate the data coming from various source systems into these Oracle tables. There is a chance that after loading I might get some unwanted data into these tables.
How do I remove just that data which I have loaded recently, and do not disturb the original data it already has.
Need to backup those tables and reload the data back if there is any problem, but I am looking at a different approach. I just don't want to change the existing system, as lot of users use the system.
I have database A (Working in Live environment) and Database B copy of Database (Not live) I have Restored whole database (A) RMAN backup file on Database (B) Previous week now i don't want to change anything in any schema and want to import only updated and new records in the table in Database B
There are around 20 schema If for example i have everything in new database B all required database objects like Procedure,functions, packages with indexes in all tables and data in tables, i just want to add new data and updated data.
IF i do following in source database
expdp directory=dpump_dir dumpfile=table_data.dmp content=data_only schemas=ACCMAIN,HRMAIN,..... include=TABLE
AND Import in destination database B, will it add new data and update existing one in table and not touch the table structure and indexes.
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
how to insert data in a table by deleting previous entered data and only inserting current data like:
CREATE TABLE test
(
name VARCHAR2(20),
id NUMBER
)
INSERT INTO test VALUES ('aaa',5500);
[code]....
I got two rows. now when I do insert statement I want to delete the previously stored data and only insert the current data like:
INSERT INTO test VALUES ('aaa',8);
INSERT INTO test VALUES ('aaa',9);
it must show aaa,8 and aaa,9 bt not the previous values.
NOTE: we can not do sth like: update set... where id = ... becoz the values are dynamic.
I'm trying to add edmx file in my project for first time. I want to choose the oracle provider ODP.net but cannot find Oracle in the data source list. I have oracle 11g installed , odp and odt installed and can access it from the solution as well. I saw the Oracle listed under data source when I tried to connect the solution to the database through server explorer. The solution is connected to Oracle database through ODP.
View 8 Replies View RelatedOracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
[code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
when i press when button pressed trigger, i want first the form will delete all the previous data and then populate the data from the table, that's why i used clear_block first, but this clear_code is not working here. my coding is given below
go_block('show');
clear_block(NO_VALIDATE);
declare
cursor c1 is select *
from qtr_demand order by 1;
begin
[code]..........
I am considering all of the capabilities and benefits of using Data Pump for exporting and importing extremely large data files. Would like to know if importing to tape is possible? If so, would the data be accessible if needed later?
View 4 Replies View RelatedDB Used : Oracle 10g.
A table X : NUM, INST are column names
NUM ----- INST
1234 ----- 23,22,21,78
2235 ----- 20,7,2,1
1298 ----- 23,22,21,65,98
9087 ----- 20,7,2,1
-- Based upon requirement :
1) Split values from "INST" Column : suppose 23
2) Find all values from "NUM" column for above splitted value i.e 23 ,
Eg:
For Inst : 23 ,
It's corresponding "NUM" values are : 1234,1298
3) Save these values into
A table Y : INST, NUM are column names.
INST NUM
23 1234,1298
1) I have a thousand records in Table X , and for all of those records i need to split and save data into Table Y.Hence, I need to do this task with best possible performance.
2) After this whenever a new data comes in Table X, above 'split & save' operation should automatically be called and append corresponding data wherever possible..
We are migrating a proc application as described below.
Old Env: UNIX
Old DB: Oracle 8i
New Env: Linux
New DB: Oracle 11g
New modules are successfully compiled in Linux environment. But we are facing issues in writing the output of VARCHAR datatype to a file.
find below the extract of code.
EXEC SQL BEGIN DECLARE SECTION;
varchar mcolmnvarchar[4];
EXEC SQL END DECLARE SECTION;
EXEC SQL DECLARE crs CURSOR FOR
SELECT NVL(colmn,' ') FROM table1
memset(mcolmnvarchar.arr,'�',4); //Was added for only Linux migration. Not present in unix env.
EXEC SQL FETCH c1 INTO :mcolmnvarchar;
cout << "Data at Stage one"<< mcolmnvarchar << endl;
mcolmnvarchar.arr[mcolmnvarchar.len]='�';
cout << "Data at Stage two"<< mcolmnvarchar << endl;
fprintf(fptr,"%-4s",mcolmnvarchar.arr);
Above code works absolutely fine in Unix env with Oracle 8i. But with Linux env & Oracle 11g it is not working. No compilation or run time errors. Data at Stage one prints the output of database properly. But after null terminator code, Data at Stage two statement prints without any value. Value is lost after null terminator code.
I am trying to transfer data from Oracle database table into another table resides in a SQL server 2008. A database link is already set, and data can be selected/queried using
select * from a_table@db_link
the thing is when trying to insert Arabic data from Oracle to a SQL server table
insert into a_table@db_link values(
'N''some data in Arabic'' ,
'11-oct-00',
'some data in English'
);
commit;
its inserted alright, but when we try to display the data it shows like this instead of displaying Arabic, the english data is alright, but also date show as garbage?!!
when trying to insert arabic data directly through SQL server its fine though.I suggested that we transfer data through ODBC to flat files like Acess and then to SQL server but the team rejected it since they're going to do it daily and the data is huge( we are talking more than 28000 records).
I need to export only the data from schemas or tables, how to do that with Oracle Data Pump? when we use schemas parameter this export all schema, not only the data right?
View 7 Replies View RelatedI am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ?
2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well.
3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
i'm use oracle form builder 6i when i use tree item to display data
the data have been displayed normally but at runtime when i resize the window the 'tree data' is hidden with no error.
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF