We have an oracle server on windows. It was working fine till today but now it is giving an error. When i try to add a listener configuration using net configuration assistant, it terminates abruptly without givng the finish button. Why does this happen?
I am not able to open the link
[URL]......
It gives an error "Oops! This link appears to be broken"
How can we solve this?
We have a listener with the password set to it. We are trying to configure that listener to the OEM grid. However, its not getting configured. The status shows as down.
However, when we try to set up without the password, we are able to configure it on the OEM console.
Need to understand, that if passwords are set to the listener; then won't that get configured over the OEM. or is there something where we are lacking.
i have installed oracle 11g r2 rac with 2 nodes. i want to configure the client side load balancing and server side load balancing. For the client side load balancing the i have configured with the
(FAILOVER=ON) (CONNECT_TIMEOUT=5) (RETRY_COUNT =3).
and to configure server side load balancing i have modified the service as follows:
execute (DBMS_SERVICE.MODIFY_SERVICE (service_name=>'service_name', clb_goal=>DBMS_SERVICE.CLB_GOAL_SHORT);
now i have few questions:
1. for the server side load balancing do we have to configure the REMOTE_LISTENER on each node so that the instance on each node registers with the listeners on other node.
2. if we have 3 nodes does this mean that we have to configure the REMOTE_LISTENER on 3 nodes to register with the listeners on the other remaining 2 nodes.
3. does the listener have to be registered with the vip network address (where the clients usually use to connect).
i have added a new listner on new port on my window 7 system for oracle version 11.2.0.1 and registered some test databases to this new listner , then i am able to access my databases through the toad because i have changed port number in tns entry, but not able to login by sqlplus. is i am missing something? should i have to restart the system or restart the all databases?
View 1 Replies View RelatedI have installed Oracle 10g in windows 2003 two times with two different homes. (D:oraclehome and E:oraclehome).Databases db01 and db02 created in these homes respectively. how to configure listener and tnsnames to aceess these databases.
View 7 Replies View RelatedI installed apex and configure the apex listener at port 80 by mistake couldn't pay attention to use port 8080. The installation is complete but the apex is running at URL.... but the login window is invisible on the page. I can just see the name on the tab "Application Express Login" . When i click on the error message at the bottom of the browser, the message says "apex is undefied" line 35.
When I run the server, I get a message "No free port within range 80. How can I change from port 80 to 8080? how to either un-install the listener or change the port 80 to 8080
i have a form having 4 database data blocks and one non database data block(for Push Buttons like SAVE,CLEAR,EXIT..).
In the control Block i have 5 push buttons out of which one is used to Save the entries and one to clear the form. In the coding of SAVE button after writing "COMMIT_FORM;" i want to disable all other Data block on my form excluding the one containing Push buttons so that the data entered by end user stay appearing on the form till he Clears the form.
Now the problem is that when i set enabled property of one particular text_item to false , the form if closing down along with the application, it is totally disappearing from screen.This is happening for one particular text item.
what could be the possible reason for this and what needs to be done to overcome this problem.
after a long time,(i never remember when was the last time i installed 9i)i was asked to install 9i.So, whether i install server or cilent i get this error <attachment>
after i ignore it and finished the installation,The server installation gets abruptly ended for the client i get TNS errors.
I'd like to call an existing function/procedure from a resource template. For example, I have a procedure called 'rest' with an out parameter of 'p_out' - how do I use this within a resource template?
At the moment I have defined the template as type 'PL/SQL Block' and with the 'GET' defined as:
begin
myschema.rest(:p_out);
end;
APEX_PUBLIC_USER has been granted 'all' on the procedure. The p_out is populated with a piece of text.
When I call this resource, I get a '500 Internal Error' returned. I've tried adding p_out as an X-APEX-FORWARD parameter, but nothing seems to work.
Query-based templates seem to work OK.
Using Listener 1.1.3 with Tomcat6.
I am using oracle 11.2.0 in linux platform.i have created a listener for the asm database. and i am using non default port of 1525 whenever i go for lsnrctl>status always shows for the port 1521. i don't want the default port 1521 and i have changed the local listener as listener1 with port 1525 protool tcp in spfile and registered with the asm database.Is there any option to change the default listener as listener1.
also,everytime when i give lsnrctl>show current_listener it is showing "listener"
i have set the current-listener to listener1 and save_config listener1 and reloaded.After exit and enter lsnrctl>status it will show for port 1521 When i attempt to start listener1 every time. it will prompt listener1 is already running.
In one of our RAC envrionment, we have more than 15 databases in a server running in AIX Operating system.the Listener file I am able to find only one entry (SID). But while trying to execute lsnrctl status it displays all the 15 SIDs in the list hosted in the ser ver. Not sure how it works?
As we created another one new database in the database, where i need to add this SID in the listener.ora file to reload the listener.
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
I installed oracle 11.2.0.1.0 in redhat linux 5 using silent installation(using response file). Then i created a database manualy. While configuring the OEM, iam getting below error messages..
[oracle@meldc1~]$ emca -config dbcontrol db
STARTED EMCA at Apr 6, 2011 11:36:43 PM
EM Configuration Assistant, Version 11.2.0.0.2 Production
Copyright © 2003, 2005, Oracle. All rights reserved.
[Code].....
I configured listner,tnsnames and sqlnet files and able to login to oracle database using listner.
before executing emca -config dbcontrol db, i have executed emca -repos create to create a oem repository and repository got created successfully.
ISSUE : I have to create ORACLE 10G R2 RAC. This cluster will host two databases pre-prod and prod. Both databases will be on different networks. pre-prod on 10.88.119 and prod on 10.88.118. I just have two hosts forming the this cluster.
How can i configure my hosts file and during clusterware installation what entries should i make for hosts and interfaces. Can this be done in 10g or will have to switch to 11g.
Having below setup : (All this is testing environment)
1.One virtual Machine Guest OS is Windows 8 Pro 64 bit in Oracle Virtual Box
2.In the guest I have Microsoft Visual Studio 64 bit Ultimate Edition
3.Oracle 11.2.0.1 on same host machine windows 7 64 bit
In above Visual studio I wish to use Oracle 11.2.0.1 on same host machine. When I adds sql datasource control, Visual Studio is saying for installation of either one :
(A) Oracle Developer Tools for Visual Studio
(B) Oracle client software version 8.1.7 or greater.
So, I downloaded ODTwithODAC1120320_32bit.zip from below link:
[URL].........
and installation run successfully with a message regarding running installAllOracleASPNETProviders.sql after a new installation. My questions are :
1.When I opened command prompt and said sqlplus / as sysdba it is saying ORA-12560.
2.When I says sqlplus scott/tiger@orcl (I created tnsnames.ora) c:app
ishaproduct11.2.0client_1NetworkAdmin with like this :
orcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = XXX.XXX.XXX.XXX)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
In above HOST = i am giving IP address of host machine on which this VM is installed and this is also oracle server database machine too, on which I am running Oracle database;
so, after few seconds I am getting, ORA-12154.
How do I connect my orcl database which is running on the same host machine by using above configurations. My virtual machine is visible from other machines as well as oracle database machine too i.e. ping to VM IP is working fine.
We are in the design phase of a project and wanting to implement a 4 node RAC with a DR site. However to get around some licensing costs, management are insisting that only 1 node be up accepting data at the DR site. In the event of a disaster, the remaining nodes will be switched on.
View 3 Replies View RelatedI get following error when i'm configuring ASM.
I'm using Enterprise Linux and Oracle 11.1.0.6.0
[U]Note:[/U]
[root@RAC1 ~]# rpm -qa|grep asm
oracleasm-2.6.9-78.0.0.0.1.EL-2.0.3-2
oracleasm-support-2.0.3-2
only these two packages in my server. should i have to install oracleasmlib??
[root@RAC1 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM librarydriver. The following questions will determine whether the driver isloaded on boot and what permissions it will have. The current valueswill be shown in brackets ('[]'). Hitting <ENTER> without typing an answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
[B]Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED][/B]
I don't have this package in my installation cd, when i searched in the web i could not find
I have created a procedure and i am scheduling the procedure to run in dbms jobs. In the procedure, i am using UTL_SMTP connection to receive mail everything is working fine it. In the receipent if i give one email id it is working fine. if i give multiple email id in it am getting error.
View 13 Replies View RelatedI am getting a duplicate SID (ABC1 (2)) on UNIX. I have checked all the possibilities how to remove it but unable to find it. As you you see below:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
ORATAB:
================================================
ABC1:/oraclehome/oracle10g:Y
================================================
/oraclehome/oracle10g/bin/tnslsnr LISTENER_ABC1 -inherit
================================================
SID_LIST_LISTENFCATDR =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /oraclehome/oracle10g)
[Code]...
Result:
ls -lad /orahome/ora10g/dbs/initABC1 (2).ora
ls -lad /orahome/ora10g/dbs/initABC1 (2).ora ; echo ;
/bin/sh: 0403-057 Syntax error: `(' is not expected.
--------------------------------------------------------------------------------------------------------------
what to need to do to avoid this duplication? Is it something wrong with Oracle Listener.ora as it have two listeners (ABC and ABC1) that might be causing duplication?
Specs are as follows:
Linux kernel 2.6.18-274.12.1.el5
Total physical memory - 96G
Oracle version:
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production (Standard Edition)
I am having trouble making my spfile parameters take effect and would like to set them manually. Disk reads are very slow, so I thought I would look at the db_cache_size in the spfile:
<INSTANCE>.__db_cache_size=805306368
But, when I look at the parameter via 'show parameter cache':
db_cache_size big integer 0
Digging deeper, I noticed none of my <INSTANCE>.__ parameters match the values returned from 'show parameter'. Most of my concern is sga_target & pga_aggregate_target both being zero.
My memory targets:
memory_max_target big integer 49G
memory_target big integer 49G
I would like to increase the db_cache_size in an attempt to reduce the table scan time.
I newly joined Oracle 11g DB related project.That oracle environment own our customer and we have only limited time and access to that DB.
I could login that database by SQLPlus by sys user as sysdba but I do not know any DB configurations. How could I collect Oracle 11g DB configuration information from SQLPlus ?
This error occurs while trying to print a report in a PDF format using Oracle Application Express 3.0. I'm not sure what this means and how to fix it. I'm running Oracle 10g on Windows Vista.
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1186
ORA-12570: TNS: packet reader failure
This is the first time I'm attempting to print to a PDF. I did follow configuration according to the Oracle documentation. I selected the Standard configuration that uses the built-in Apache FOP or another standard XSL-FO processing engine.
when i install a db using the Assistant Configuartion Database i get no error exept this:
Enterprise manager configuration failed due to the following error - Listener is not up. Start the listener and run EM configuration again. Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details. You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
So I try lsnrctl start and i get:
C:\Windows\system32>lsnrctl start
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:26:25
Copyright © 1991, 2010, Oracle. All rights reserved.
TNS-01106: Il listener con nome LISTENER � stato gi� avviato
So I try lsnrctl status and i get:
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 29-LUG-2013 10:23:34
Copyright © 1991, 2010, Oracle. All rights reserved.
Connessione a (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
[code]...
The file "server.xml" in E:\app\Andrea.Rimoldi\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole\config\ does not exist...
Is there any way to retrieve or recover this file?
The problem is, while installing the Oracle Form and Report 11G R2, my installation got stuck on step 15, i.e configuration progress. Waited for 3hrs and still no progress.
Installing on Win 7 64-Bit, with 4gb ram.
Installed Weblogic Server 10.3.5 64bit(using JDK).
tell me about data guard accommodate with 11g database standard additions or not if no,is there any way to make it working under this edition?one more thing may i have the steps of configuration data guard in real time for anew server.
View 5 Replies View RelatedRunning a Dell x86_64 machine using CentOS 6.4 Install using the command: rpm -ivh oracle-xe-11.2.0-1.0.x86_64.rpmOracle XE installs without any errors.
However: When during database configuration we get the Database Configuration failed error The logs all show similar errors, here's a snippet: Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 BEGIN dbms_backup_restore.zerodbid(0); END; *ERROR at line
1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error: 2: No such file or directoryORA-00119: invalid specification for system parameter LOCAL_LISTENERORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=1q6xlf1.bcohome.bco.com)(PORT=1521))'Create controlfile reuse set database "XE"*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter system enable restricted session*ERROR at line 1:ORA-01034: ORACLE not availableProcess ID: 0Session ID: 0 Serial number: 0 alter database "XE" open resetlogs*ERROR at line 1:ORA-01034: ORACLE not available
Tried installing APEX 4.2 with Oracle EBS 12.1.3. I have installed APEX into the Oracle EBS database (11.2.0.3)
I am trying to install the APEX listener on the Web Tier however it starts the listener and gives the url as
[URL]........
Is there a way to set this with actual hostname of the server.
i've perform a stress test of a database in 2 configuration :
1) Single instance 11.2 with 8gb Sga e 4gb Pga on Linux, 6core with instance caging =4, resource_manager=defaut_plan
2) 2 Nodes Rac 11.2 with 8gb Sga e 4gb Pga in both nodes on Linux, 32core with instance caging =4, resource_manager=defaut_plan.
I've used Swingbench and the transaction per minute are equal, Avg transaction per s in rac are Greater then single instance (4ms vs 40ms).I know that rac is not for high performance.My question is: is rac config best than single instance and if yes what is the %?
I am running emca -config all db -repos recreate command and recreating the repository. Doing so I am getting error while uploading the repository. The Drop and Create is going fine. The exception that I am getting is :
CONFIG: Error uploading configuration data to the repository
oracle.sysman.emdrep.config.ConfigurationException: FATAL Configuration Exceptions
at oracle.sysman.emdrep.config.EMSchemaConfiguration.perform(EMSchemaConfiguration.java:232)
at oracle.sysman.emcp.EMReposConfig.uploadConfigDataToRepository(EMReposConfig.java:699)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:385)
[Code]..
And the emca config file is showing exception with i18N jar file.
oracle.sysman.emdrep.config.EMSchemaConfiguration$ConfigInstance run
SEVERE: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[Code]...
Exception Occured during Execution of oracle.sysman.emdrep.util.TransxWrapper
why this exception is coming while uploading the reporsitory.