FRM-30425: Summarized database item must reside in a block with Query All Records or Precompute Summaries set to Yes.
Item: TOTAL
Block: SALE_DETAIL
FRM-30085: Unable to adjust form for output.
What can i do ?
I have a form which contains two canvas.In the first canvas, i have a data block which contains two columns(database item of both are no). In second canvas i have a list item.
My problem is how to pass the value(s) of this data block to the item list which is present in second canvas.
The requirement user has given is such that the user will enter different categories, and in the second canvas where the main datablock is present, will contain a list item in data block which should show the data entered by the user.
I am modifying an existing form and wanted to do this with less number of modifications. The existing form has one checkbox item ( displayed and attached to database)..and its not in use ( was created for some enhancement that never implemented but code is there)..and in the form at several places its mentioned/calculated based on Updatabale/Enable/Queryable/Insert..all properties.
Since I want to use the same position of this check box so ..i simply detached the canvas from this item..it compiles fine but when login into application it gives al those errors like..FRM--item not update able.etc etc..
Is there any property to just hide an item inspite having related codes in the form ?
Version information:
Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
When an user enters a value in a field of a Screen, I want to query up the next screen records based on that user input value in the previous screen.The previous screen is based on a control block i.e.
Q_EMP
items- Q_EMP.emp_id, Q_EMP.FY, Q_EMP.hire_flag.
i want to insert a record in table when one of item in database block is filled..from which property i knw my one of field in block is filled or not.
View 2 Replies View RelatedI am having trouble changing a non-displayed field when a displayed field is changed.
When a user wants to un-assign a territory they want to just null the ID field (non-database item). I then need to null the PIDM field(not visible, database item) for that one record.
I tried this, but I end up putting null on all the records instead of just the one record, which ends up un-assigning all the territories not just the one.
Is there a way to assign the null to the PIDM field associated to the ID field of that particular record.
I have control block. In which user enters two values. Next is data block in which two items have property 'copy value from item' set to 'control block.item1' and 'control block.item2' resp. If thees items are made database items then in execute query will they be sent as parameters in addition to default where clause? if I check last query then query does not hv these parameters but the records returned are already filtered by control block items.
View 1 Replies View RelatedI have a form in which i had 6 items in a block,like sno,task,responsible,totaldays,date,status .Except 'totaldays' item all items will be updated when i press button called 'Update'.am doing this in on - update by using if(:system.block_status='changed').
Now i want only if a specific item 'totaldays' is changed , the on-update should happen.
i have 6 items in a block
sno
task
responsible,
totaldays
date,
status
only if i change totaldays item the on - update should happen
how to do this?
I have one tabular block on the canvas and there is one check box on this block. I want that when I uncheck this checkbox, one item on the current record gets disabled.
i manage to turn all the records enabled or disabled.
I am attaching a dummy form in which I have tried. Checkbox is acting on field :ecc_no.
The DB table for the same is:
CREATE TABLE ECC_MASTER
(
PARTY_TYPE CHAR(1 BYTE) NOT NULL,
PARTY_CODE CHAR(5 BYTE) NOT NULL,
ECC_NO VARCHAR2(25 BYTE) NOT NULL,
RANGE_DIVISION VARCHAR2(30 BYTE),
EMP_NO NUMBER(4) NOT NULL,
[code]....
I am creating a record with the items - S_No, Product_Name, Selling_Qty, Price.
Checking the total qty (Tot_Qty) from the purchase stock - table1 and already sold out qty (Sold_Qty) of the product from table2.
Consider the following values: Tot_Qty = 200; Sold_Qty = 50;
Now i create a first record of the form as follows: here on selecting the Product_name from LOV, will display the Selling_Qty item - which can be edited (Selling_Qty = Tot_Qty - Sold_Qty) and its price.
S_No Product_Name Selling_Qty Price
1. KeyBoard 50(150) 200
2. KeyBoard 30(150) 200
3. KeyBoard 50(150) 200
Note:
[value given within () are displayed automatically after selecting the prod]
My prob is, when i am entering next record, it displays the same 150 as qty, which have to be 100. After selecting the product from LOV, it should calculate & validate as shown below: which means, previous record value of Selling_Qty also have to be subtracted and displayed.
S_No Product_Name Selling_Qty Price
1. KeyBoard 50(150) 200
2. KeyBoard 30(100) 200
3. KeyBoard 50(70) 200
Is there any built-in functions to retrieve previous record value?
We have a master detail form block A (master) contains an item, this item is in the record group's where-clause used to fill a list item on block B (detail block) (database item) we fille the list item in a pre-record trigger on the master block this works fine but when we navigate through the records in block a we intermittently get the following error : FRM-41337 : cannot populate the list from record group;
how should we filll our list item, in which trigger (when-new-record-instance of master block doesn't work correctly, the list item only gets filled after clicking it twice)
i have form have one multi record block and sing record block. In multi record block having an item namely Excise_value. I want to find the sum of total Excise_Value for all the record. How to accomplish this.
PS: I want to use the Formula/summary property in forms
I have a form in which there are three blocks A,B and C. When I press F7, the form enters Enter-Query Mode and all blocks clear except block A's one item. Say, Block A has 5 items, Item1, Item2,.. Item5. When I enter Enter-Query mode, Item2 of block A is not cleared and rest all are cleared.
View 2 Replies View RelatedMy problem consists in setting dynamically a data block related to the item chosen by the user.So I ask if it is possible, in forms 10g, to base dynamically a data block with different tables having different columns.
View 5 Replies View RelatedI have a form w/a tab canvas. BlkA is on Tab1 and Blk2 is on Tab2. In BlkA I have several items that have when-validate-item triggers. However, the trigger does not fire when I enter a value into item1 of BlkA followed by clicking on Tab2. To solve, I placed validate(form_scope) in the When-Tab-Page-Changed trigger. This works well with invoking the validation. However, focus remains on Tab2 (Blk2).
I would like focus to return to failed validation item in Blk1. I can capture the block name using :system.cursor_block in the Post-Block trigger of BlkA, assign that value to a form parameter and when a validation fails via the When-Tab-Page-Changed trigger I can return user back to BlkA(Tab1). However, I need direction on how to return user to the specific item in BlkA that failed validation
I'm using Oracle forms 10g. In the form i have this multiple records under one block. After performing the query, all records are cannot be updated. And i have this buttons at the right side that will enable the certain item that can only be updated. My problem is i cannot enable the item in the first record,instead of first record all records in that item was enable.
View 8 Replies View RelatedI have a multi-record block with several text items.
On one of the text items i want to enter a value and then check whether the same value for the item has already been entered on any other records within the block.
If it has already been entered then i want to display a message and null out the field.
I have tried using app_record.for_All_records from a when-validat-item trigger but this does not work as you get a 'FRM-40737 Illegal restricted procedure go_block in when-validate-item trigger ' error
I am trying to disable mouse navigation on data block or text item,. What i want is to my text items in specified block be keyboard navigable only.
The problem is that i don't have that option on text_items or data block (my conclusion: probably because it is not possible to change mouse navigate option for text item or data block).
I have also tried in WHEN-NEW-BLOCK-INSTANCE trigger
set_item_property('block.item', mouse_navigate, property_false)
and
set_block_property('block', mouse_navigate, property_false)
and of course it did not work.
I created a block for EMP table on tabular style. if in first line empno entered is 1then i don't want to allow the end user to enter 1 in second line. but when-validate-item is not working because first_record and next_record is not allowed. I need to validate before saving the data into emp table and immediately after empno is entered into empno item.
View 16 Replies View RelatedI need to implement a "Select All" function in a Data Block with All the Check boxes. It's a Database data block with 10 records to be displayed at a time. Check Box Items are in default layout. The requirement is when user checks/un-checks that select all check box which is placed on the left hand side of the other check boxes, it should select/deselect all the check box database items in that particular record.
View 7 Replies View RelatedI am preparing a query form based on one view.it will return the result set based on parameters passed.What i need is i will add 3 non database item in entry mode along with result set.Once the user inputs these 3 fields in non database fields , it should update the relevant records mapped to it in database table. How to do this.
View 19 Replies View RelatedI have the scenario where I have a table(table 1) which stores the car code and the meaning of that code. I then have another table (table 2)which just stores the code. My datablock is based on the table which just contains the code(table 2). On my form if the user wishes to populate this field in the record I have a Lov which goes to the table 1 and retrieves the code and the meaning of it.
The code is then returned to the corresponding field in the datablock for table 2. this works fine in adding and editing. the user sees the meaning and whilst selecting from the lov populates the code field behind the scenes and everything works fine. However, my problem is when the user does a query only the code field is populated from table 2 (the code field is hidden to the user) therefore the meaning field is left blank as if there is no data there when in fact this is not the case.
I want to display my query select * from Clinical_Chart_CCHPI in non database item which is 1000 Char. I want to display that query when my forms execute.below is the test case.
Create table Clinical_Chart (Chart_Number Char(12),MR_NO Char(13));
Create table Clinical_Chart_CCHPI (Chart_Number Char(12),serial_number number,Date Date, Remarks Varchar(1000));
--------------------------
insert into Clinical_Chart(1,1);
insert into Clinical_Chart_CCHPI (1,1,01-JAN-
[code]...
I have taken one non database block and my item Test which is non-database too. But no result is coming i have attached JPEG file too.
I am using a block the problem is I am unable to fetch the data into the block when I have entered the execute_query even tried with the pre-block trigger but not getting the message which is in pre-block how to over come with this..struggling since two days but unable to resolve it
View 2 Replies View Relatedi want to retrieve a value from the database and then print in a display item. how can i do it?
this code is the retrieval part but it doesn't work:
DECLARE
num number(10);
BEGIN
SELECT ID_CD
INTO num
FROM cd_details
WHERE price=599;
end;
uploading an image item which is not a database item from the operating system. I am using forms 10g on db 10g. My platform is windows Vista sp1.
I am trying to use
GO_ITEM('BEEEE');
Set_Custom_Property( 'SALGRADE.BEEEE',1, 'READIMGFILE', 'C:/users/ajayia/Desktop/Beeee.jpg' ) ;
But I just get a blank image on runform. I am using WHEN-NEW-BLOCK-INSTANCE trigger. I have tried it on when-new-form-instance, but also not working. The file am trying to upload is a JPG file format, but i cant find the file type in forms image item property. What can I change it to. Or how to i go about changing it.
I want to change Database Data Block Property at runtime.
View 4 Replies View RelatedThe main qn is in the subject line.
I have used the following code
GO_BLOCK('CHILD_BLK');
FIRST_RECORD;
LOOP
IF NVL(:CHILD_BLK.SELECT_FLAG,'N')='Y' THEN
V_REC_NO := GET_BLOCK_PROPERTY('CHILD_BLK',CURRENT_RECORD);
SET_ITEM_INSTANCE_PROPERTY('CHILD_BLK.ASSET_DESC',
V_REC_NO,
[code]....
I have 2 items in my form:
1) Text Item
2) Tlist
Upon form load, TList will be populated with predefined item. The behavior i am trying to achieve is to have a text item so user could entered specific text which will then filter the values in TList .
How many ASM instance can reside on one single machine....
View 1 Replies View Related