I would like to know if with Oracle Forms Builder 11g, we can use mouse instead of TAB to validate record? And why Forms Builder use TAB or ENTER Key to validate record? I have a SAVE button, but i want to replace the TAB navigation validation by the mouse click. Is it possible?
View 6 RepliesI am trying to disable mouse navigation on data block or text item,. What i want is to my text items in specified block be keyboard navigable only.
The problem is that i don't have that option on text_items or data block (my conclusion: probably because it is not possible to change mouse navigate option for text item or data block).
I have also tried in WHEN-NEW-BLOCK-INSTANCE trigger
set_item_property('block.item', mouse_navigate, property_false)
and
set_block_property('block', mouse_navigate, property_false)
and of course it did not work.
I am using the below code to disable forms field in fdtlblk.mdt_rqr = 'NO'
but I can go there with mouse click ( for tab and enter it is working fine ) .
but for mouse click it is not working .
if (:fdtlblk.mdt_rqr = 'NO') then
go_item('fdtlblk.section_loss');
set_item_property('FUP_RCVD_DT',enabled,property_false);
[Code]....
I want to link to blocks using description as there is no relation , for example i have two tables with one field in common called description, and i want to link this field in two tables using like operator.
create table item ( item_code varchar2(12),item_name varchar2(30));
insert into item VALUES('A','HEA160');
insert into item VALUES('B','HEA180');
create table stk (sl_item varchar2(12),sl_desc varchar2(30),sl_qty number);
insert into stk VALUES ('X','HEA160X1000',12);
insert into stk VALUES ('X','HEA160X2000',4);
insert into stk VALUES ('Y','HEA180X3000',10);
Suppose i click on item block item_desc with value on HEA160 all the items similar to that should appear in stk block like 'HEA160X1000' ,'HEA160X2000' , if i click on 'HEA180' on item then 'HEA180X3000' it should come.
I created Main Menu form and in this form I attached popup menu in picture's property problem is that when i right click on this picture then show the popup menu .I want when I click left click then it should show the popup menu.
View 2 Replies View Relatedwhy when-mouse move,up,enter,leave are not working in oracle forms 10g except when-mouse-click and when-mouse-doubleclick on any items.
what i need to do to execute this triggers..
i am migrating from forms 6i to forms 10g but i am facing a problem. when i enter to my new form and i try to navigate thru the items with my mouse the validation of the item doesn't work properly. the cursor change position but the functionality works like it is still in the first item. the validation work when you use enter or tab.the same thing when you try to fetch the LOV, the LOV of the first item is populated not where the cursor is positioned.
View 3 Replies View Related'm using go_item to open the canvas but the cursor doesnt want to focus on the item. I have to mouse click the item before I can enter any data or tab through it.
View 16 Replies View RelatedI created TREE object in my application main menu and I want to use it through MOUSE and KEYBOARD therefore I add WHEN-TREE-NODE-ACTIVATED trigger at my tree object
Trigger text is:
declare
htree item;
node_value VARCHAR2(100);
akt_node ftree.node;
[code]...
Problem:When I am using MOUSE and clicking on + or anyother form/report, it's opened last selected form/report or application closed but it is working fine when I am using KEYBOARD.
I have 2 non data base blocks, these 2 blocks act like master details but there is no relation. In header block i have 2 fields called "Product name" and "Product Type"
in detail block having 2 tab pages one having multi record(20 item number and name displayed on it) another one having single record but it has around 20 image items displayed on it.
My requirement is once i enter the product name and then if i press either "key tab" or "Key Enter" or "Mouse Move" from product name field
into product type field then detail record should be populated automatically without using go_block and go_item.
A requisition application shows the latest requisition details in the homepage and allow the users to go particular requisitions (extract) details from a button (CALL_FORM), also they can modify the records in that form.
I want to give an EXECUTE_QUERY (WHEN-WINDOW-ACTIVATED) when im returning to the home page and the cursor should return to the last row where i was.
do this from navigation triggers (with out writing a select statement in when-window-activated).
what is the basic workaround to provide to switch from one form to another form via custom-menu at runtime?
I attached a menu-item to every of my forms and I can call them seperately from the forms builder. But I am not able to switch between the forms then. If I am clicking on a menu-item, I get frm-40010.
P.S. I'd prefer to close the current form, if the new form has been opened. Do I have to control this seperately or is the closing of the last form default?
We are facing below issue in Oracle forms 10g( Rel 10.1.2.0.2) with Windows XP professional.Application server J2EE 10.1.2.0.2).
We have a multirecords block. After navigating to last record by clicking mouse in scroll bar and change values in a column by clicking mouse in column to change, cursor control is moving to some other record(where cursor is located previously) and current changed value it is showing as not fully validated.
Eg: We have columns like below in multirecords block
Security Price Date Price
--------------- ------ ----
1 1/1/2011 12.00
2 1/1/2011 16.00
3 1/1/2011 18.00
4 1/1/2011 19.00 (Last Record)
If am changing last records price to 20 then press tab key, cursor will be moved to second record and cursor will be highlighted in security 2. column price where we changed to 20 also not validated to show as 20.00 with 2 decimal format mask.Along with this we are getting below error message ' FRM-41008 - Undefined function key, press Ctrl + F1 for list of valid keys.After changing the price we are pressing the tab key only.
This occurs randomnly and when we querying more than 2000 records with multiple times.
I have developed customer entry form, its working fine. I have 2 display items on form. One is country name & other is region, these are fetched based on country id LOV.
Now I want to display country name & region at time of navigation. I have written following code on WHEN_NEW_RECORD_INSTANCE of block.
******
DECLARE
CCNTRY_ID VARCHAR2(2);
CCNTRY_NAM VARCHAR2(25);
CREGION VARCHAR2(11);
begin
select cntry_nam,region into ccntry_nam,cregion from cntry where cntry_id=ccntry_id;
exception
when no_data_found then
message('NO DATA FOUND');
end;
**********
I always get message not data found on navigation. Problem is only with the display item other, values of database columns are being shown.
what name is used to reverence the mouse cursor in Forms. I am trying to state that if the user reaches the last record in a file and clicks the mouse on the empty record below that they will get a message saying they are at the last record (basically so it means they have to manually click an add record button before they can add a new record)
I currently have this:
IF :SYSTEM.LAST_RECORD = 'TRUE'
THEN
<something here> := :SYSTEM.LAST_RECORD;
MESSAGE('You are at the last record.');
ELSE
DOWN;
END IF;
Where i have <something here> is where i assume the refence for the mouse cursor should go, of which i dont know the name, am i correct?
Another thing is that I have a checkbox that is originally NO but when set to YES cannot be turned back to NO.
I have accomplished this by putting the following code in the WHEN_CHECKBOX_CHANGED trigger and it works fine. However it also updates the checkbox to NO and then back to YES, , as a result this brings up my Are you sure you want to update message. I originally thought that if i took out the :in_active := 'Y'; the FORM_TRIGGER_FAILURE would stop the checkbox being changed in the first place but this didnt appear to be the case. how to accomplish this without letting it update at all (perhaps put something in the WHEN_VALIDATE trigger?
DECLARE
return_alert number;
BEGIN
if :in_active = 'N' THEN
return_alert := SHOW_ALERT('checkbox_alert');
:in_active := 'Y';
RAISE FORM_TRIGGER_FAILURE;
END if;
END;
I m using oracle forms 9i in which i want effect on text fields that will change color of text after mouse cursor move on that field . is it possible in oracle form 9i .
View 6 Replies View RelatedI have two date fields in my form one start date and the other is end date.I have changed their properties to datetime and set the initial value $$dbdatetime$$ and format mask to dd/mm/rrrr 24HH:MM , what i want is
1.i want to display the A.M and P.M along with that.
2.If the time and date of end dt is lesser than start error must come.
3.If the user enters the P.M during the day time before noon then it should give error message.
Has any one written the validation code for
IP Address...
i.e it should be any thing from 0.0.0.0 to 255.255.255.255
I would like to ask a very small question. what is the code that should be written to open a picture inside the button.
I have already made the button, and the trigger is when push button, what I want is when I click the button it opens a picture in this directory:
F:AmjadAmjadamjad1.jpg
the name of the picture is taken from table1 the colum serial_number
i create form in which first block is non database having 2 items from_date and to_date and one button is there.when i click on button i.e when button pressed new window is open having new database block
i write code on when button pressed
HIDE_WINDOW('XX_RFQ_FIND');
SET_WINDOW_PROPERTY('XX_RFQ_FIND', visible, property_false);
SHOW_WINDOW('XX_RFQ_ACKT');
GO_ITEM('LE_NAME');
SEARCH_REQ;
[code]...
my problem is that when i click on button i fetch only one record
I want a code for a button to click and calendar show. Select the date and year for enter in text field.
View 4 Replies View RelatedI have one NUMBER field with size 15. I have set format mask 999,999,999,999,999 on this field. This is formatting the data I am entering in that field. But the problem is if I enter a value in that field and moves to another field. And if I want to edit the previous field again I have to keep the cursor at the left end of the value.
For example I enter 3,000 in the field. If I want to edit the field again, I have to edit it from left like 1,233,000. I cannot edit it at the end(like 3,000,123).
Even I can click anywhere in that field where I have the format mask. check the screen shot in the attachment. In the red square, you can find a value with space in between.
I have a time field which i need to validate for military time. for example like e.g.1630. Time entered outside of military time range should not be permitted e.g. 1364, 2510.
View 4 Replies View RelatedI have one column Value his Datatype is varchar2 and I want to validate it with Type column his values are(Char,Date,Number). If Column Type have value Number then column value should accept number input only. How we 'll achieve this.
View 3 Replies View RelatedI have a Situation for Date and Time Validation.
I have 4 fields, d1,d2,t1,t2 all are date datatype
I have 1 field for R1 for resource a varchar datatype
1. d1 and d2 for date
2. t1 and t2 for time.
The User enter d1 and d2, t1 and t2
eg 01-03-2011 - > d1
01-03-2011 - > d2
9:00 - > t1
9:30 - > t2
and 'Room1' - R1 for resource.
any other entry having the same data, or have partial data should not be allowed.
like on 01-03-2011 between 9:29 to : 9:40 or even 8:30 to 9:01 on the same date or (replicated dates boundaries) should not be allowed.
i have field in DB that taken ( 1 or 2 or 3 ) am added it as text item at first and then change it to ( radio group ) contain 3 radio as :
value for first 1 = 1 , = 2 , = 3 and mapping = 1
initial value for the group = 1
but when am working with the form and commit form there is no data add in this field when am change the radio value by click on any other on ( 2 or 3 ) it's saved no problem in it ..
why this thing happen coz i need to set the first radio as default for the form .
I am working on form builder 6i.I have FIND widnows and MAIN window.
FIND Window: contains field1 and field2, FIND Button.
block A: Multi record data block on table t1. It contains field1,field2,field3.
block B: non datablock, it contains field4, field5.
If i enter something and click FIND button, it will populate data in Block A.If i put the cursor in any record in block A, and after that put the cursor in Block B, it will populate block B related to Block A record.For this, In Block A--> post record(block level) trigger, i am capturing values in variables.
:GLOBAL.f1:=:BlockA.field1
:GLOBAL.f2:=:BlockB.field2
In Block B--> When-New-Block-instance(Block Level)
select field3, field 4 from t2 where t1=:global.f1 and t2=:global.f2;
and populating data in block B.It's working fine.
REQUIREMENT: If i click the FIND second time, in Block B--> it's retaining previous value. I want to clear the block B once i click the FIND button. I tried to write in POST-BLOCK (Block B-->block level)
CLEAR_BLOCK('NO_VALIDATE');
But it's not working.In which trigger i have to write code to clear block.
In the attached PRE-INSERT Trigger Code i need to do a validation. Validatation: If the Date range is between FEB 6 2013 and MARCH 1 2013 then the code should work ELSE It should throw a message
Check_Product_Title;
Begin
if :prod2.internet_product_flag = 'Y' and :prod2.brnd_code is null then
soft_messages('E',TRUE,'Brand code must be specified for CCH online product');
end if;
[Code]....
I just need to create a login form ..its like user will login using his given id and password will be encryted when entering and i just need to simple validation that if he has entered corrected password it will display message ok or else wrong password.
View 3 Replies View Relatedmy purpose is when PRE-INSERT trigger fires validation should be done like date format , primary key in table if validation is ok then a value of text box should be set to sequence no . else it should generate message
View 9 Replies View Related