I have Data guard configured with a primary database and a standby database. I have installed oracle 11.2.0.1 in both servers, and I want to upgrade to 11.2.0.3 by installing the patch. I know how to install the patch in the primary. Should I follow the same procedure also on the standby or it is different?
View 5 RepliesWe have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies View Relatedis the upgrade patch the same for standard edition and enterprise edition or there are two separate patches?
View 5 Replies View RelatedWe have dataugard set up on linux with oracle10.2.0.1.0 and now we want to upgrade that complete setup (primary, standby, dataguard broker) to 11.2.0.3.0.
View 1 Replies View RelatedThere is a Single Instance production server Oracle 9iR2 [9.2.0.8] OS HP-UX PARISC 11i v1 to RAC.
Now we want to migration this server with minimum downtime to Oracle 11gR2 [11.2.0.2] in RAC environment OS HP-UX 11i v3 Itanium DOwn time must be minimum. what will be the procedure ?
I have a primary and standby DB using data guard 10.2.0.3.I want to upgrade oracle to 11G.I know that primary and standby should have same version even if data guard will not work again.I want to know what is the steps by steps action to properly upgrade both DB : primary and Standby.
View 1 Replies View RelatedMistakenly I have configure dataguard on different versions. Primary is 11.2.0.3.0 and Stand By is 11.2.0.1.0. Log shipping is perfectly working, but cannot put Stand By in read only mode.
View 3 Replies View RelatedDatabase = 11.2.0.3.0
Operating System : Solaris 11 sparc 64.
applying PSU patch : 16619892
I am trying to apply patch 16619892 on 11.2.0.3.0 to upgrade it to 11.2.0.3.7.
I hope this is a straight forword stuff i beleive, but i am getting the following errors and log details.
$ cd /noracle/patch/16619892/
xxxx@xxxx$ /noracle/home/oracle/product/11.2.0.3/OPatch/opatch apply
Oracle Interim Patch Installer version 11.2.0.3.4
Copyright (c) 2012, Oracle Corporation. All rights reserved.
[Code].....
I am trying to upgrade my database approx 20GB size from 8.1.7.2.1 to 8.1.7.4 runningon windows NT 32bit server.I found that we can download from metalink.oracle.comIs that any cost involved in downloading and installing or is it provided freely by Oracle.
View 7 Replies View RelatedControlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
[code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
I am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ?
2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well.
3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
Our organization has recently decided to go for storage metro cluster solution for disaster recovery. In a Data guard environment, we normally calculate how much archive log is generating and based on that value we calculate the required bandwidth.
For storage metro cluster, we need to find how much block is changing in our primary database, and the same rate of change would apply on DR cluster. Now, i need to give the assumption how much changing is happening in my system. How to calculate the change.
We are migrating from 10.2.0.5 to 11.2.0.3 (hp-ux to RHEL). Is it possible to transport tablespaces without data, with just table structures?
(Just like we do in export rows=n)
I'm planning to upgrade a small database (~150GB) from 10.2.0.3 on windows 2003 23bit to 11.2.0.3 RAC on Linux 5.8.The database contains oracle spatial too. A suitable method and link to document to be followed.
View 2 Replies View RelatedI recently performed an upgrade on a new server from oracle 10gr2 to oracle 11gr2 (11.2.0.3).
I take the rman backup from oracle 10g server and restore it on new server where I installed oracle 11gr2.
But on my previous oracle 10gr2 server I enabled the auditing. After doing successful upgrade now when I try to login with any user except sys I receive the following error:
SQL> conn scott/tiger
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
ORA-02002: error while writing to audit trail
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
I got the workaround by setting the parameter audit_trail=FALSE (Previous value was DB_EXTENDED) .But I want my auditing to be enabled as per y requirements.
find reference note IDs for DB upgrade from 11.2.0.2 to 11.2.0.3.2, as I am finding only Exadata which I don't want but I want to find for Ebiz database, on OS - Solaris 10 9/10 s10s_u9wos_14a SPARC.
View 1 Replies View RelatedAlong with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
All my sys tables are very slow after my database upgrade from 10.2.0.4 to 11.2.0.3 on AIX 6.1
For example
select * from ALL_TAB_COLUMNS; -- taking 19 seconds in 11.2.0.3 and few millisec in 10.2.0.4
I have deleted and updated fixed and dictionary table statistics , till I facing this issue
Know the Patch set number to upgrade a Oracle 10.2.0.1 to 10.2.0.5 on Solaris 10 Spark 64bits?
View 1 Replies View Relatedi'm using a mixture of Oracle� Data Guard Concepts and Administration11g Release 1 (11.1) And Bulletin : MAA - Creating a RAC Physical Standby for a RAC Primary 10g ( on oracle support) But neither is comprehensive for what i'm trying to do.
setting up Data Guard Broker on a RAC Data Guard environment?
I am very new to data guard...I have a primary and a physical standby database...If the primary got crashed, are the users directly switched to physical standyby (is it automated) or the DBA has to manually do the fail over or switch over....is it the same concept as in RAC like TAF....How can the DBA know that the users are disconnected from the database.....explain with some steps...
the version is 10.2.0...
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
View 1 Replies View RelatedI want to implement data guard on same PC.
View 1 Replies View Related