We are migrating from 10.2.0.5 to 11.2.0.3 (hp-ux to RHEL). Is it possible to transport tablespaces without data, with just table structures?
(Just like we do in export rows=n)
The GAP archived log can not transport to target database by auto, how can i do?
Sun May 27 06:32:59 2012
FAL[client]: Failed to request gap sequence
GAP - thread 1 sequence 161-161
DBID 1820932955 branch 775456988
FAL[client]: All defined FAL servers have been attempted.
-------------------------------------------------------------
Check that the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter is defined to a value that is sufficiently large enough to maintain adequate log switch information to resolve archivelog gaps.
OS read hat, oracle enterprise edition 11g release 2, dataguard 2 physical standby's
everything works fine but since 1 day we get following warnings from dataguard on the primary server:
SELECT * FROM V$DATAGUARD_STATUS;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAM
------------------------ ------------- ---------- ----------- ---------- --- --------
MESSAGE
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Log Transport Services Warning 0 309911 0 NO 01.11.12
RTC returned 2, disabling RTC for next 2 I/Os.
in the alert log it looks like this:
RTC returned 2, disabling RTC for next 2 I/Os.
Thu Nov 01 12:09:46 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
RTC returned 2, disabling RTC for next 2 I/Os.
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
Thu Nov 01 12:11:16 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
I have a 10G Express system running. I Have 2 tablespaces in production. WHen taking backup, it terminates unsuccessfully saying system01.dbf is damaged. The application works fine and no data loss is found through the application interface.
So can I shift the data to a new server using the dbf files of the tablespaces in use?
I'm rying to import schema's from a dump file that came from a different environment.
What I have is:
1. dump file
2. log file of the export
I'm trying to import the file(containing three schemas) with remap_schemas, and it fails, gives a lot of ORA-00959: tablespace 'string' does not exist.
Now, I've read in OTN:
[URL]
that what you need to do in that case is to use the REMAP_TABLESPACE option,to redirect the objects to a different tablespace.
I don't see a name of the tablespace I'm getting the error for in the export log.I don't know if I have more tablespaces I have to redirect with REMAP_TABLESPACE.
I don't want to perform this 3 times, have an error, by that find out what's the next tablespace needing redirection and only then starting over...
How can I know from the dump file and the log file,what is the tablespace names i need for the redirection to my names? Or its just that the tablespace giving me the error is the only one in the dump file?
Is this possible to run a direct impdp with database link for transport tablespace instead of first creating export dump and then using impdp.
I tried the below command and it shows up error.I have gone through the entire Oracle docs but could not find the exact command with network link for transport tablespace.
$impdp system/passwd DIRECTORY=data_pump_dir transport_tablespaces=TBS1,TBS2,TBS3 LOGFILE=tbs.log network_link=dblink
UDI-00015: invalid context or job state for parameter, 'transport_tablespaces'
We have dataugard set up on linux with oracle10.2.0.1.0 and now we want to upgrade that complete setup (primary, standby, dataguard broker) to 11.2.0.3.0.
View 1 Replies View RelatedI have Data guard configured with a primary database and a standby database. I have installed oracle 11.2.0.1 in both servers, and I want to upgrade to 11.2.0.3 by installing the patch. I know how to install the patch in the primary. Should I follow the same procedure also on the standby or it is different?
View 5 Replies View RelatedI'm planning to upgrade a small database (~150GB) from 10.2.0.3 on windows 2003 23bit to 11.2.0.3 RAC on Linux 5.8.The database contains oracle spatial too. A suitable method and link to document to be followed.
View 2 Replies View RelatedI recently performed an upgrade on a new server from oracle 10gr2 to oracle 11gr2 (11.2.0.3).
I take the rman backup from oracle 10g server and restore it on new server where I installed oracle 11gr2.
But on my previous oracle 10gr2 server I enabled the auditing. After doing successful upgrade now when I try to login with any user except sys I receive the following error:
SQL> conn scott/tiger
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
ORA-02002: error while writing to audit trail
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
I got the workaround by setting the parameter audit_trail=FALSE (Previous value was DB_EXTENDED) .But I want my auditing to be enabled as per y requirements.
is the upgrade patch the same for standard edition and enterprise edition or there are two separate patches?
View 5 Replies View RelatedThere is a Single Instance production server Oracle 9iR2 [9.2.0.8] OS HP-UX PARISC 11i v1 to RAC.
Now we want to migration this server with minimum downtime to Oracle 11gR2 [11.2.0.2] in RAC environment OS HP-UX 11i v3 Itanium DOwn time must be minimum. what will be the procedure ?
I have a primary and standby DB using data guard 10.2.0.3.I want to upgrade oracle to 11G.I know that primary and standby should have same version even if data guard will not work again.I want to know what is the steps by steps action to properly upgrade both DB : primary and Standby.
View 1 Replies View RelatedMistakenly I have configure dataguard on different versions. Primary is 11.2.0.3.0 and Stand By is 11.2.0.1.0. Log shipping is perfectly working, but cannot put Stand By in read only mode.
View 3 Replies View Relatedfind reference note IDs for DB upgrade from 11.2.0.2 to 11.2.0.3.2, as I am finding only Exadata which I don't want but I want to find for Ebiz database, on OS - Solaris 10 9/10 s10s_u9wos_14a SPARC.
View 1 Replies View RelatedAlong with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
All my sys tables are very slow after my database upgrade from 10.2.0.4 to 11.2.0.3 on AIX 6.1
For example
select * from ALL_TAB_COLUMNS; -- taking 19 seconds in 11.2.0.3 and few millisec in 10.2.0.4
I have deleted and updated fixed and dictionary table statistics , till I facing this issue
Know the Patch set number to upgrade a Oracle 10.2.0.1 to 10.2.0.5 on Solaris 10 Spark 64bits?
View 1 Replies View Relatedat my Oracle 11gR2 (11.2.0.3.0) Instance i have two tablespaces that i want to "bundle" into only one tablespace. Herre is the problem, that some of the tables in the two tbalespaces has the same title but some rows of the tables could be not the same.
Is it possible with a kind of migration assistent to migrate two tablespaces into one in that way, that theassistent only writes that rows into the new tablespace, that are not in the tablespace at the moment.
Another way i was thinking about is to have an insert statement coupled with a select statement. The select statement selects all the rows, that are not in the table where i want to migrate in and the insert statement put that selectet rows into the new table.
Is something of that possible?
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies View RelatedI've got one database which was Initially upgraded from Oracle 8i to 10.2.04 running on windows. Most of the tabespaces are Dictionary managed. Do you think moving them to locally managed tablespace would give me better performance?
if Yes, what approach I should apply to move them to locally managed? I would like to do this with minimum/no downtime.
I'm supposed to create a database for an application. The server where this will be running previously had a database for a pretty similar app. I don't know much about Oracle so I reused the ZFS filesystems and left them how they were created (because honestly, I didn't knew why they were created that way, but I'm pretty sure it was for a good reason).
CODEapp/oradata_smart_ora1 858M 12.2G 858M /oradata/SMART/ora1
app/oradata_smart_ora2 7.18M 18.0G 7.18M /oradata/SMART/ora2
app/oradata_smart_ora3 7.18M 36.0G 7.18M /oradata/SMART/ora3
app/oradata_smart_ora4 60.6K 400G 60.6K /oradata/SMART/ora4
app/oradata_smart_redo1 400M 2.61G 400M /oradata/SMART/redo1
app/oradata_smart_redo2 200M 2.80G 200M /oradata/SMART/redo2
app/oradata_smart_redo3 200M 2.80G 200M /oradata/SMART/redo3
Since I reused the filesystems I created my database and placed the controlfiles in the same places where the old database files were (/oradata/SMART/ora1,/oradata/SMART/ora2,/oradata/SMART/ora3). Thinking like MySQL works I created CODEapp/oradata_smart_ora4 60.6K 400G 60.6K /oradata/SMART/ora4 specifically to store the database there.
The databases startups and mounts no problem. Note that this server will manage with millions/billions records throughout its lifetime.
1. Now that my Database is created, whats the next step? Create the Schema or Tablespace?
2. Tablespace Questions: Tablespace datafile(s) is where actual data from tables is stored? how many are needed? Default or Temporary? How much space will I need for it? Autoextend?
I have a Physical Standby database on server#2 which has its UNDO and TEMP tablespaces in a mount point that is a bit small. I discovered yesterday that this mount point was completely filled. This is not an immediate problem, because even though the TEMP and UNDO tablespaces are large, there is almost no usage of them.
I logged into my Primary, and created a new temp tablespace (TEMP2), made it the database default, dropped the TEMP tablespace, and then re-created the TEMP tablespace in a different mount point (with a much higher capacity!). I then made the new TEMP as the database default temp tablespace again. I expected that these changes would be propagated over to the Physical Standby via log application, but they didn't come over.
I have standby_file_management set to AUTO, and there are no unapplied logs. Everything OTHER than the temp tablespaces seems to be in synch.
I created table that is range partitioned:
CODEPARTITION t1p1 VALUES LESS THAN (TO_DATE('2011-11-01', 'YYYY-MM-DD'))
PARTITION t1p2 VALUES LESS THAN (TO_DATE('2011-11-02', 'YYYY-MM-DD'))
....
PARTITION t1p4 VALUES LESS THAN (MAXVALUE)
Every year partitions will be added for next 12 month. The table partition will be dropped every month (I have to have data from last six month so in July I could drop partition t1p1, in August - t1p2....). How many tablespaces should I create for this table and how place partitions in them to have data for last six month and use minimum space on disk?
I was thinking about one tablespace for whole table because space of each dropped partition will be reused, what do you think about that?
Is the tablespace actually off-line when doing a user-managed hot backup? I know the data blocks are copied into a redo stream but I am not sure if that means it(tablespace) is actually on-line or off-line.
View 6 Replies View RelatedI have deleted lots of data from existing tables in one tablespace. shrink or coalesce the size of the tablespace.
View 7 Replies View RelatedI need to create a shell script to find the free space of an auto extensible tablespaces and send an alert when the free space is < 700MB. I tried checking with the dba_free_space, but I did not get the exact free space.
Tell me the logic to find the exact free space of autoextensible enabled tablespaces?
how can i check using query the free percentages of my tablespaces
View 10 Replies View RelatedI am going to upgrade database from 11.1.0.7 to 11.2.0.3
1) If compatible is set to 10.2.0 in 11.2.0.3, will it work ?
2) If compatible set to maximum level, will it affect our application ?
3) Whether any code related problem occurred after upgrading like PL/SQL codes ?
We are planning to upgrade our database from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi to Oracle Standard Edition 11g . We also have oracle apex installed on Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi database with oracle apex 3.1
No our plan to upgrade the database and oracle apex to 4.2. Since Oracle Enterprise Edition is licensing is very expensive we though of buying standard edition and upgrade to this version.
can we upgrade the oracle database from enterprise edition to latest standard edition?