In my production Db, I have 3 mount points like /vol1/orcl,/vol2/orcl,/vol3/orcl which contains the datafiles.
I have to create a standby like the same location. how to write the db_file_name_convert parameter?
I have a requirement to change the instance parameter of the primary database and standby in the data guard. Any procedure to do the same. I have to do it directly on production and there is no test set up so I cannot experiment . The procedure I am thinking of is as below.
1. Stop the standby
2. backup the primary
3. Change the parameter and restart to make it effective
4. Start the primary
5. Go to stand by
6. Change the parameter and mount the database.
7. Check if both are in sync and apply logs if not.
Below is my query it is working fine when condition is satisfied with valid user ID and Password
create or replace
PROCEDURE ISVALIDUSER /*This is Procedure created to validate Login users information Created on 09212012 by Chakravarthy*/
(
pUSERID IN VARCHAR2,
[code]...
Here I am facing a problem when I am giving invalid User ID or Password it is not passing the -1 into pUSERTYPE which is OUT parameter
here is the situation, I have to write a function that receive as parameter a datatype varchar2 and validate if the letter is less than "A" or greater than "Z", it must print do not correct, or correct depending on the situation, no problem so far, the only problem I've got is: If the symbol is ";" is valid, but i do not know how to write it, It does not depend on the PL/SQl languaje but depends on the logic itself.
DECLARE
v_nombre varchar2(20):='john;%';
vv varchar2(1);
begin
for i in 1..length(v_nombre) loop
[code]...
I'm working on trying to write a shell script to parse a parameter file, but at the same time I want to be able to overwrite the parameter file settings with other command line settings. For instance if my par file had export/import settings for the username, password, schema, etc;
I wanted to run the same export/import with those settings for a different schema. I want to be able to put the schema=<different_than_par_file> after the parfile=<parfile.par and have the parfile be read and applied for everything except the different schema.
Right now I'm storing the cmd line and parsing it again looking for other parameters besides the parfile.
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies View RelatedControlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
am trying to write a simple sql which would delete data from last n months but it will keep the data for the first of each of those month from current sysdate
e.g
Jan 1 - 30 deletes 2 - 30 keeps data for 1st
Feb 1 - 28 deletes 2 - 28 keeps data for 1st
Mar
Apr Current sysdate
May
I am facing a problem with utl_http.write_text in my pl/sql application. My requirement is to write data of size>32k. So I used a clob variable in write_text. But still it is showing numeric or value error when the data size is above 8k.
I have read that chunked transfer encoding will work. But I couldn't find out how this is done.
I am writing following query
SELECT DISTINCT a.list_type_code, a.list_type_name
FROM jls_list_type a, jls_list_control b
WHERE b.jalsa_srl = :jalsa_srl
AND b.list_no != a.list_type_code
ORDER BY list_type_code
I just want to display only those records from JLS_LIST_TYPE which is not present in other table JLS_LIST_CONTROL ... for this i wrote above query but it is not working.
So we need an mechanism to read data from LONG RAW and convert into actual file.
View 1 Replies View RelatedIs it possible to create trigger on the various tables and views exists (i.e. dynamic performance views) in data dictionary, when ever any DML operations performs by Oracle it self?
View 6 Replies View RelatedI have a table revenue
create table revenue
(
person varchar2(23),
month varchar2(3),
rev_amt number
)
and i have data in a file like below
Person Jan Feb Mar Apr Mai Jun Jul Aug Sep Oct Nov Dez
--------------------------------------------------------
Schnyder,345,223,122,345,324,244,123,123,345,121,345,197
Weber,234,234,123,457,456,287,234,123,678,656,341,567
Keller,596,276,347,134,743,545,216,456,124,753,346,456
Meyer,987,345,645,567,834,567,789,234,678,973,456,125
Holzer,509,154,876,347,146,788,174,986,568,246,324,987
Müller,456,125,678,235,878,237,567,237,788,237,324,778
Binggeli,487,347,458,347,235,864,689,235,764,964,624,347
Stoller,596,237,976,876,346,567,126,879,125,568,124,753
Marty,094,234,235,763,054,567,237,457,325,753,577,346
Studer,784,567,235,753,124,575,864,235,753,864,634,678
i want to load it into the table in the following way.
Person Month Revenue
-------------------------
Schnyder Jan 345
Schnyder Feb 223
Schnyder Mar 122
Schnyder Apr 345
Schnyder Mai 324
Schnyder Jun 244
Schnyder Jul 123
Schnyder Aug 123
Schnyder Sep 345
Schnyder Oct 121
Schnyder Nov 345
Schnyder Dez 197
........ ... ...
How to write control file to load this data into the above revenue table.
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
[code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
I am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ?
2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well.
3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
Our organization has recently decided to go for storage metro cluster solution for disaster recovery. In a Data guard environment, we normally calculate how much archive log is generating and based on that value we calculate the required bandwidth.
For storage metro cluster, we need to find how much block is changing in our primary database, and the same rate of change would apply on DR cluster. Now, i need to give the assumption how much changing is happening in my system. How to calculate the change.
i'm using a mixture of Oracle� Data Guard Concepts and Administration11g Release 1 (11.1) And Bulletin : MAA - Creating a RAC Physical Standby for a RAC Primary 10g ( on oracle support) But neither is comprehensive for what i'm trying to do.
setting up Data Guard Broker on a RAC Data Guard environment?
how to write procedure to load the data into a table using xml as input parameter to a procedure and xml file is as shown below which is input to me.
xml version="1.0"?><DiseaseCodes><Entity><dcode>0</dcode><ddesc>(I87)Other disorders of veins - postphlebitic syndrome</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J04)Acute laryngitis and tracheitis</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity><Entity><dcode>0</dcode><ddesc>(J17*)Pneumonia in other diseases - whooping cough</ddesc><claimid>34543></claimid><reauthflag>0</reauthflag></Entity></DiseaseCodes>.
I am very new to data guard...I have a primary and a physical standby database...If the primary got crashed, are the users directly switched to physical standyby (is it automated) or the DBA has to manually do the fail over or switch over....is it the same concept as in RAC like TAF....How can the DBA know that the users are disconnected from the database.....explain with some steps...
the version is 10.2.0...
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
View 1 Replies View RelatedI want to implement data guard on same PC.
View 1 Replies View RelatedI did upgrade from 10.2.0.1 to 10.2.0.4 on the secondary database , the primary database version is 10.2.0.4,i took cold backup from the primary to the secondary database , when i try to create control file on the secondary , i am getting this ORA-01130: database file version 10.2.0.3.0 incompatiable with ORACLE version 10.2.0.1.0.*
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I have a requirement where in I have to store large data in one of the database columns using stored procedure.
I have declared the column as CLOB as it can store upto 4GB and also the input parameter for the procedure as CLOB. But when I am trying to pass large data it is not allowing to store as it is throwing literal string too large error.
Is there any restriction in the data size to be passed to the stored procedure?
I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
