I am running 11.2. Within a DB trigger, I need to capture the IP address of the client making the change. I see there is a SYS_CONTEXT('USERENV','IP_ADDRESS') built in. Is this the correct way to capture the IP of the client making the change?
View 2 RepliesI have a table in that i have some columns along with that four columns to capture the user details. but these details must be captured Programmatically.like whenever a user insert or update or delete his credentials must be captured in these columns. but i am not figuring out in which trigger i have to write and how.
View 19 Replies View RelatedI have a form w/a tab canvas. BlkA is on Tab1 and Blk2 is on Tab2. In BlkA I have several items that have when-validate-item triggers. However, the trigger does not fire when I enter a value into item1 of BlkA followed by clicking on Tab2. To solve, I placed validate(form_scope) in the When-Tab-Page-Changed trigger. This works well with invoking the validation. However, focus remains on Tab2 (Blk2).
I would like focus to return to failed validation item in Blk1. I can capture the block name using :system.cursor_block in the Post-Block trigger of BlkA, assign that value to a form parameter and when a validation fails via the When-Tab-Page-Changed trigger I can return user back to BlkA(Tab1). However, I need direction on how to return user to the specific item in BlkA that failed validation
I have a situation where one form calls another. I am opening the other form(say B) using the below code.
declare
temp_form formmodule;
begin
temp_form := FIND_FORM ('D:RSSQ2TestingpurposesMODULE3_MULTIPLE');
[code]...
On Form B there is an Exit button on click of which it closes the Form B and returns to Form A
begin
close_form('MODULE3_MULTIPLE') ;
end;
In my scenario on Exit from FORM B i need to enable a button on FORM A.I am not able to capture the trigger that fires when I Press the Exit
I have two tables emp , emp address as below
emp table :
emp_id emp_name,
1 rajesh
2 suresh
emp address table :
emp id emp_addresstype emp address
1 O kukatpally
1 H Hitech
2 O Kolkata
2 H hydar nagar
I need the query to display the Office address & House address & emp id in single query
ex: 1,Kukatally,hitech
2,kolkata,hydarnagr
I am returning a refcursor as OUT parameter in my stored procedure. I would like to capture a no data found for the refcursor. Is there a way I can raise the exception without compromising the performance?
I have tried the below options that are not working.
1. If I run a SELECT query to check for records and then OPEN the refcursor for that SELECT, then it takes a performance hit as I am reading the table twice.
2. I can FETCH a refcursor into a table type and check the count in the table to raise exception.But once I fetch from a refcuror, the data is gone. So, this option does not work either.
OS : Windows 2003 DB : 10.2.0.4 I am doing capture and replay first time.I want to take 2 captures at a time. 1st capture for 2 schemas and 2nd capture for other schemas.Is it possible?I have searched on internet but didn't get any clue about it..
View 4 Replies View RelatedThe sqlcache is getting over-written.I would like to capture information from AWR snapshots and feed those (as a workload) into the DBMS_ADVISOR.I can't see where it's possible (other than manually creating my workload from AWR information)
View 3 Replies View RelatedI was reading about Oracle SPM feature, but i have questions in mind for automatic feature..
* if we have set both capture and use parameter true. Oracle will automatically capture Plans, but will it automatically evolve new plans to accepted or it will wait for evolve it manually before using new plan.
* If it Automatically evolve, when and how will it?
* If it Automatically, will change old plan's flag accepted to No? or add one more accepted plan
I need the effective dates (start and end) of marital status changes in sequential order, without duplicate rows over the same time frame. (Per_all_people_f table only). For example below, I only need the items that are in bold. I am very new to pl/sql and cannot figure out how to do this.
When I do this in sql with Min date and max date; the 1st and 2nd blocks are correct, the 3rd block has wrong end date and 4th block is entirely missing as the 'M' is already counted for in block 1 even though it occurred after other status changes.
Example of the rows and what I need in BOLD below:
So no gaps in time and it captures the effective date range for that particular marital status; I need to get:
1st block 'S' 10/23/2000 - 4/12/2004
2nd block 'M' 4/13/2004 - 10/1/2006
3rd block 'D' 10/2/2006 - 5/23/2007
4th block 'M' 5/24/2007 - 12/31/4712
Actual data in table I do get on a query with no restrictions:
490 *10/23/2000* *4/12/2004* 0 US S F
490 *4/13/2004* *10/1/2006* 0 US M F
490 *10/2/2006* 2/12/2007 0 US D F
490 2/13/2007 *5/23/2007* 0 US D F
490 *5/24/2007* 10/7/2010 0 US M F
490 10/8/2010 11/15/2012 0 US M F
490 11/16/2012 *12/31/4712* 0 US M F
we have 1 server oracle and many clients. when client sends sql statement to server.How to Capture sql statement to analysis before it sent to server and execution.
View 18 Replies View RelatedI have this error when I use this to fix it:
re-instantiate the schema.
1. stop the downstream capture and apply processes.
2. Instantiate source schema so we know from what point to start replication
SQL> set serverout on
SQL>
DECLARE
[code]....
I am using the below command,
lv_ret := WEBUTIL_FILE_TRANSFER.AS_To_Client_with_progress(lv_clnt_file, lv_srvr_file,
'Download from Application Server in progress', 'Please wait');
to download a file to my H: drive.Here lv_ret is a boolean variable.The file is not downloaded to my H drive when there is no enough space.How to capture that error?
How can i capture an image using webcam connected to my PC and show that in the image item in my d2k form 6.0.I want to get the function in a when button pressed trigger.
View 16 Replies View RelatedHow to capture key press in oracle forms 6i.My intention is to create a form with 2 blocks. First block have one text item which user will input data and second block displays data based on the value typing in the text item(Same like LOV).
View 12 Replies View RelatedI have this 3rd party tool, which are running SQL queries. I need to see what queries the tool is running and capture them. I enabled tracing but that's not working, as the tool doesn't establish connection, it connects when it has to run the query and then gets disconnected.
View 2 Replies View RelatedI have a field say field A which has to be enabled/disabled based on the return value from an LOV.
ex: if lov returns A then field A should be enabled anything other than A, then field A should be disabled.
Do we have any function to get the return value from LOV?
I am using the below code to capture all important logs when user failed to login on database , but i cant capture the username which are failing to connect on database.
CREATE OR REPLACE
TRIGGER failed_logon_notifications
AFTER SERVERERROR ON DATABASE
[Code].....
I need to know how to capture the Parameter Value of a Procedure in a Variable and reference that variable in another Procedure or Package.
View 12 Replies View RelatedI have created a table A say columns a,b,c,d,E. I have created a application to insert and update and delete rows in to this table.I want to capture when some user inserts , update, delete the rows.
How do I set this variable..
I have big source tables to load in a data warehouse. We are in a full Oracle environment. So I need to extract only delta since the last extract.
I need to capture even deleted rows from the source table.
I have tested the following solution:
- declare a materialized view log on the source table
- load the content on this view log in my ODS
- empty this view log
- load my DWH with the captured delta
It is very simple and seems to work perfectly. I am just confused by the fact that nobody seems to have implemented such a solution.
I am looking for a way to capture a TXs from one database and create a script or use it with tool, so we can capture TXs close to production while testing changes being implemented in database.
Env:
OS: Redhat Linux 5.0
DB: 10.2.0.4
Actually Requirement: We have active-active Golden Gate setup done for one of our DB and once a quarter we make changes in the database using DDL (CREATE / ALTER - TABLES, FUNCTIONS, TRIGGERS, etc). We are 24/7 environment and hence no downtime is affordable. What I like to know is a way to capture all TXs from one of the DB and create a script so we can run them while we are testing new changes in the database. Something like DBMS_WORKLOAD_CAPTURE Package (Available only after 11gR1) or some tools available in the market.
I also tried looking into Load Runner but felt it works with App tier than DB, I may be wrong there.
I'm configuring Oracle Streams 11g. When I'm trying create capture process I receive this error:
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 372
ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 312
User stream administrator "stradmin" has dba role in both source and target databases.
I want to capture date and time in separate fields from user and save it in single column in table
example: user enters date and time
Date : 08/05/20212
Time : 18:50:00
At the time of save I want to save [08/05/2012 18:50:00].
I have a .sql file that is used as a wrapper file that when executes within sqlplus (9.2.0.1.0), executes a bunch of .sql files within it. Example below:
WRAPPER.SQL
START D:ScriptsA.sql "'04-01-2012 00:00:00'"
START D:ScriptsB.sql "'04-01-2012 00:00:00'"
START D:ScriptsC.sql "'04-01-2012 00:00:00'"
START D:ScriptsD.sql "'04-01-2012 00:00:00'"
START D:ScriptsE.sql "'04-01-2012 00:00:00'"
EXIT;
Each of the .sql file (A,B,C,D,E) Spools individual output of sql statment within them. Each of the indv .sql file queries different tables with different filters(where) clause.
I would like to capture any error (OS,SQL,DB) into indv error file (A_ERROR.log). The reason being is because later in the process we need to validate if there were any errors before processing and loading the data into our SQL database
oracle 11.2.0.3 I have insert only tables that receive srecords from multiple processes at a rate of about 200/second. Each transaction can have up to 100 records. I have another set of processes that queries this table for the latest data. These processes run anywhere from once a minute to once an hour. Processes do not get all of the data. They get data based on a type field.
Both of these are from java middle tiers. The process that queries data (The subscriber) does so at the request of many remote servers (there will be vast numbers). I am not allowed to expose these downstream databases to the internet (they are not oracle DBs anyway) so I cannot use streams or golden gate
So basicallyInsert Process: multiple sessions that combined insert records up to 200/second. There will be between 1-100 records per commit.
Query Process: Downtream process makes a request to my middle tier. This middle tier runs a query to get the latest data and passes it back. This design is set and I cannot change it.
1. right now we capture the insert time of the record. However, at this rate of inserts some processes will commit faster than others. So I cant use a 'greater than my insert time' query.
2. streams/golden gate won't work. can't register these DBs.
3. don't want to serialize my inserts because since I am not sure I can keep up with the insert rate. I don't even know what the specs will be for the production hardware. I have to actually deliver this before its decided. So I am being conservative.
4. I really want to avoid updates on this table if possible. In part due to my limited ability to test.
5. due to the number of downstream processes it is possible that it will request data and for some reason fail to insert the data locally. So the downstream application will keep track of the latest data it received. This means that a subscriber may need to request the same data again.
Is there a way to set up change data capture with multiple subscribers to handle this? if my subscribers are just queries? All the queries come from the same servers(there will be several, but all the same thing). If so, when I performance test this are there any wait issues I should keep an eye on?
We have a requirement where we need to publish only the delta/changes made to an existing materialized view. This MV is fast refreshed over a db link. Since, MV will have all the data, we won't
1] Created MV Log
CREATE MATERIALIZED VIEW LOG ON SHRTS_FLNG_PRCSD
WITH PRIMARY KEY, SEQUENCE
INCLUDING NEW VALUES;
2] Create MV
CREATE MATERIALIZED VIEW MV_SHRTS_FLNG_PRCSD (ITRTN_NB,UNQ_ID,XCHNG_ORG_ID,FLNG_ST,MAX_PRCSD_ITRTN_NB,SBMTD_SCRTS_AM,SBMTD_PSTN_AM)
BUILD IMMEDIATE
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
[code]....
3) I can see deltas on MV logs.
UNQ_IDITRTN_NBSEQUENCE$$SNAPTIME$$DMLTYPE$$OLD_NEW$$CHANGE_VECTOR$$XID$$
{FDE35AAC-E749-4507-972F-F26F5982E046}121/1/4000UU28002.81485714140869E15
{FDE35AAC-E749-4507-972F-F26F5982E046}131/1/4000UN28002.81485714140869E15
{FDE35AAC-E749-4507-972F-F26F5982E046}181/1/4000DO00002.81491297598354E15
4) I have created a temp table to capture the diff between MV and newly inserted Deltas. I have added SEQ_NB column using Oracle sequence to capture the diff
CREATE TABLE MKT_CMPLC.TMP_SHRTS_FLNG_PRCSD
(
ITRTN_NB NUMBER(2) NOT NULL,
UNQ_ID CHAR(38 BYTE) NOT NULL,
XCHNG_ORG_ID NUMBER(8) NOT NULL,
FLNG_ST VARCHAR2(9 BYTE),
[code]....
5) I have refreshed the MV
exec dbms_mview.refresh('MV_SHRTS_FLNG_PRCSD');
6) In order to capture the new inserts, I am using following DML
INSERT INTO tmp_SHRTS_FLNG_PRCSD SELECT ITRTN_NB,
UNQ_ID,
XCHNG_ORG_ID,
FLNG_ST,
MAX_PRCSD_ITRTN_NB,
SBMTD_SCRTS_AM,
[code]....
We need only delta records. Is there any way to extract actual rows from MV logs.
I wonder is there any way to capture all the invalid nodes in the xml when the xml is validated with an xsd (schema).
I am using java's xml validation package to perform validation (javax.xml.validation packages in java 1.5)
Is there any process to capture rejected data(bad data) in a table when data is moved using SQL Loader.
View 5 Replies View RelatedI just need to run javascript to capture the contents of the page( form) like labels and values in the fields using a COPY button to capture all the information available on the page or form to copy that to system clipboard so that information can be used into another system.
View 2 Replies View Related