CVU To Validate Readiness For Oracle Cluster 11g Upgrade
Sep 24, 2013
I have a 11.2 Grid Infrastructure with the July PSU applied. I ran the CVU and reveive the following error. I checked the file in error and I find nothing wrong. Why does CVU fail the pre-check?
RUN CVU:
./runcluvfy.sh stage -pre crsinst -upgrade -n cusms1,cusms2 -src_crshome /u01/grid11203 -dest_crshome /u02/grid12101 -dest_version 12.1.0.1.0 -verbose
RECEIVED ERROR:
Starting check for zeroconf check ...
ERROR:
PRVE-10077 : NOZEROCONF parameter was not specified or was not set to yes in file "/etc/sysconfig/network" on node "cusms2.us.com"
PRVE-10077 : NOZEROCONF parameter was not specified or was not set to yes in file "/etc/sysconfig/network" on node "cusms1.us.com"
Check for zeroconf check failed
Pre-check for cluster services setup was unsuccessful on all the nodes.
VERIFIED FILE IS CORRECT:
[root@cusms1 ~]# cat /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=cusms1.ca.us.com
GATEWAY=121.1.160.1
NOZEROCONF=yes
[root@cusms2 ~]# cat /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=cusms2.ca.us.
GATEWAY=121.1.160.1
NOZEROCONF=yes
View 1 Replies
ADVERTISEMENT
Sep 18, 2008
The installation of CRS is successfull & at end it ask to execute 2 scripts on both nodes i.e. orainstRoot.sh and root.sh
When the scripts are executed,the execution of orainstRoot.sh is successfull , but root.sh give following error:
[root@rac2host crs]# ./root.sh
WARNING: directory '/home/oracle/product' is not owned by root
WARNING: directory 'home/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
[code]....
Is this concerned with permissions on OCR, Voting Disk.
the ./cluvy shows the cluster is valid.
View 1 Replies
View Related
Jul 6, 2012
We have to upgrade our existing 11g R-1standalone DB to Cluster & ASM. Upgrade DB from 11.1.0.7 to 11.2.0.3 & Enable RAC.
View 7 Replies
View Related
Jun 6, 2012
Along with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
View 4 Replies
View Related
Jun 14, 2012
Know the Patch set number to upgrade a Oracle 10.2.0.1 to 10.2.0.5 on Solaris 10 Spark 64bits?
View 1 Replies
View Related
Jul 19, 2013
I am going to upgrade database from 11.1.0.7 to 11.2.0.3
1) If compatible is set to 10.2.0 in 11.2.0.3, will it work ?
2) If compatible set to maximum level, will it affect our application ?
3) Whether any code related problem occurred after upgrading like PL/SQL codes ?
View 6 Replies
View Related
Mar 13, 2013
We are planning to upgrade our database from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi to Oracle Standard Edition 11g . We also have oracle apex installed on Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi database with oracle apex 3.1
No our plan to upgrade the database and oracle apex to 4.2. Since Oracle Enterprise Edition is licensing is very expensive we though of buying standard edition and upgrade to this version.
can we upgrade the oracle database from enterprise edition to latest standard edition?
View 3 Replies
View Related
Apr 23, 2013
Are Oracle cluster and Oracle clusterware are same and has same in meaning in RAC ?
View 6 Replies
View Related
Oct 27, 2010
Steps for installing Oracle Cluster 10?
View 9 Replies
View Related
Aug 26, 2012
I have a RAC working with SAN raw devices presented to ASM and working fine. My situation has changed since the installation of the RAC. Now I need a shared storage (with a filesystem) to upload some files (so DB can read these as external tables) for this I have used OCFS2.
As you can see I have Oracle RAC on raw ASM + shared storage on OCFS2 and for the time been all seems to be well and working perfectly. Can these coexist with out effecting the other?
View 2 Replies
View Related
Jun 21, 2013
I would like to build a 2-node cluster without RAC. I desire to operate 2 Oracle database instances for use by 2 separate applications. I plan to run Linux. I would like node1 to act as the primary server for the databases in application1 and node2 to act as the failover server for the databases in application1. Conversely, I want node2 to act as the primary server for databases in application2 and node1 to act as the failover server for databases in application2. Can Oracle SE and Oracle Clusterware be configured in this this way?
View 2 Replies
View Related
Feb 21, 2013
I am trying to come up with a plan for an upgrade that is needed for a server I maintain. It is a Windows 2003 32bit running Oracle 10.2.0.3 on old Hardware. It also has two obscure 3rd party applications that are running on it that directly access the database. These applications are supported by off site consultants.
My initial plan was to Create a Windows 2008 R2 Virtual Server and install the same version of Oracle 10.2.0.3. Using Rman clone the database to the new server. Have the consultants come in and get the applications working. Once everything in the new environment seems to be working fine, run RMAN again and reclone the database to have all the latest data. Then at a later time upgrade the database to 11g 32bit. Virtually no downtime and we could spend all the time we needed getting the applications working and testing the new environment.
The plan is dead right of the bat though because I realize 10.2.0.3 is not supported by Windows 2008 R2. I really did not want to add an Oracle DB upgrade into the mix at the same time. Just because their are so many changes from the old environment to the new that I want to break this down into manageable chunks. And I can maybe get by with 1 day of down time.
So now I am looking at installing 11g on my Virtual Server, Clone the database, upgrade the database, have the consultants come in and get the applications working. All the while we are down. If we run into any problems, which you always do, it just completely blows the schedule.
View 1 Replies
View Related
Jun 29, 2012
I need to upgrade our current system 10.2.0.5 (non Asm) to 11.2.0.3(ASM) on the same host.
So a few options : install ASM on current 10.2.0.5, create volumes etc and shift DB into ASM
upgrade to 11.2.0.3 GI - standalone
upgrade DB to 11.2.0.3
install 11.2.0.3 GI, configure ASM and run against 10.2.0.5
DB upgrade DB to 11.2.0.3
The DB upgrade has to come last I've been told.
View 1 Replies
View Related
Sep 29, 2010
Yesterday I was installing 11.2.0.2 patch to our Oracle 11gR2(11.2.0.1.0) Two node RAC cluster on OEL 5.4 x86 Linux.Before installing I have read [URL] support note which says "Note: All Oracle Grid Infrastructure patch set upgrades must be out-of-place upgrades, in which you install the patch set into a new Grid home. In-place patch set upgrades are not supported. "
During Installation I found following Installation Option :
1) Install and configure Oracle grid Infrastructure for a cluster
2) Configure Oracle Grid Infrastructure for a Standalone Server
3) Upgrade Oracle Grid Infrastructure or Oracle Automatic Storage Management
4) Install Oracle Grid Infrastructure Software Only
Which option should I have to choose here ?
View 1 Replies
View Related
Apr 8, 2013
Is Oracle certified Oracle 11.2.0.2.0 to run under a Microsoft 2008 Cluster ?
View 6 Replies
View Related
Sep 7, 2013
I got following error on Oracle 10.2.0.4.0 RAC on solaris 10
Oracle clsomon failed with fatal status 12.
Oracle CRS failure. Rebooting for cluster integrity.
I think this problem in 11g but I am using 10g.
View 14 Replies
View Related
Jun 29, 2012
I am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
View 2 Replies
View Related
Sep 7, 2011
I am installaing oracle RAC 11.2.0.1. After I installed the grid infrastructure, when I ran root.sh, I got below errors;
ASM failed to start. Check /d1/app/grid/cfgtoollogs/asmca/asmca-1109068AM4612.log for details.
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
[Code]....
View 9 Replies
View Related
Jul 17, 2002
What is the different between the new RAC feature - real application cluster and OPS... for me it sound the same..
View 3 Replies
View Related
Sep 8, 2012
I created Virtual Private Network for VIP and subnet is 255.255.255.255. I need VPN subnet as 255.255.255.0. How to i create
INS-40911: Ensure that nodes in the list are up and reachable, and ensure that the node addresses are all in the same subnet.
View 2 Replies
View Related
Aug 22, 2012
After installing a 4 node cluster 11.2.0.3 with 16 CPU's (4 on each node) on IBM 795 with aix 6.1 each server is using 0.5 CPU with no user load on the system. Running SIHA on one server typically uses 0.05 CPU with no user load on the system.
View 5 Replies
View Related
May 16, 2011
How to migrate Oracle Standalone Database to Oracle Real Application Cluster?
View 1 Replies
View Related
Jan 22, 2013
I am doing the following steps for stopping the Oracle RAC Services on a 2 node.(OS is Windows 2008 Release 2).
srvctl stop database -d <database_name>
Node 1:
crsctl stop has
Node 2:
crsctl stop has
But i am getting error like Oracle HAS Service not stopped successfully. Finally what i did was stopped the OHAS Service from Windows Services.
which is the right procedure to have a clean stopping of RAC Services in 11g R2.
View 4 Replies
View Related
Jan 31, 2013
While installing 11g oracle grid cluster software. I am getting below error.
[INS-40724] No locally defined network interface matches the SCAN VIP subnet.
i have given scan name as scan-cluster.invent
host-name virtual ip name
rac3 rac3-vip
rac5 rac5-vip
I am able to ping rac3 and rac5 from both nodes.
MY /etc/host file look like this.
192.168.2.133 rac3.invent.com rac3
192.168.2.132 rac3-priv.invent.com rac3-priv
192.168.122.1 rac3-vip.invent.com rac3-vip
192.168.2.136 rac5.invent.com rac5
[code]...
ssh connectivity everything works fine.
View 1 Replies
View Related
Oct 24, 2012
My application consists of Oracle RAC and Oracle Enterprise Manage (OEM) on same two nodes. I am exploring the idea of utilizing Oracle Clusterware (which is already installed with Oracle RAC) to support OEM in active passive mode.
Here is the scenario.
Node A running Solaris 10.9 on SPARC and Node B running Solaris 10.9 on SPARC.
Node A and Node B are both Oracle RAC Nodes ( Active Active ) which use Shared Storage for Oracle using ASM.
Node A and Node B will run Oracle Enterprise Manager (OEM) Application in active passive scenario which will be using Oracle RAC for its database. So, both Oracle RAC and OEM are sharing same server A and B for its clusters.
Now, OEM application need a third party clusterware to fail it over. It needs clusterware to provide floating VIP and shared folder of the size of 20GB which will keep software libraries. If node A goes down, node B have access to same libraries and will come up as active.
Do you know if oracle clusterware which comes with Oracle RAC can support OEM for failing over i.e. it can provide floating VIP and shared file system?
View 3 Replies
View Related
Oct 17, 2013
We have 2 servers running Oracle 11gR2 Window server 2008 64 bit RAC. Today I add new shared disk visible from both servers. All our data placed on ASM partitions, but we need Windows volume for exchanging some data between servers & users;Actions:then i have prepare disk on shared storage from 1st node, run diskmfmt.msc & rescan disks when windows recognizes new hdd, initialize it.create an Extended partition & Logical drive & Assign drive letter. from another nodes, make sure no drive letter is assigned.
Sometimes Windows automatically assign drive letter. If drive letter is assigned, right click & Change drive letter & Remove. from 1st node, format this logical drive using ocfsFormat.exe after execute below scripts i have face some issues
E:app11.2.0gridcfs>ocfsformat /m P: /c 1024 /v DATA /f /d /aReg Get Cluster Name(): Reg Query ValueEx for CFS_CLUSTER_NAME failed with error 203
This indicates that the Cluster Name has not been configured on this node for OCFSThe volume formatted in this condition will be seen by all nodes running OCFS.
View 3 Replies
View Related
Jun 26, 2013
I'm planning to upgrade a small database (~150GB) from 10.2.0.3 on windows 2003 23bit to 11.2.0.3 RAC on Linux 5.8.The database contains oracle spatial too. A suitable method and link to document to be followed.
View 2 Replies
View Related
Nov 19, 2012
I recently performed an upgrade on a new server from oracle 10gr2 to oracle 11gr2 (11.2.0.3).
I take the rman backup from oracle 10g server and restore it on new server where I installed oracle 11gr2.
But on my previous oracle 10gr2 server I enabled the auditing. After doing successful upgrade now when I try to login with any user except sys I receive the following error:
SQL> conn scott/tiger
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
ORA-02002: error while writing to audit trail
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
I got the workaround by setting the parameter audit_trail=FALSE (Previous value was DB_EXTENDED) .But I want my auditing to be enabled as per y requirements.
View 1 Replies
View Related
Sep 22, 2012
is the upgrade patch the same for standard edition and enterprise edition or there are two separate patches?
View 5 Replies
View Related
Oct 22, 2012
find reference note IDs for DB upgrade from 11.2.0.2 to 11.2.0.3.2, as I am finding only Exadata which I don't want but I want to find for Ebiz database, on OS - Solaris 10 9/10 s10s_u9wos_14a SPARC.
View 1 Replies
View Related
