Backup & Recovery :: Logical Block Corruption - Recreate SYSMAN Schema Index
Mar 3, 2010
I am facing problem of logical block curruption.
SQL> select * from v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
---------- ---------- ---------- ------------------ ---------
3 61454 1 1417157166 LOGICAL
3 31256 1 1417011117 LOGICAL
OWNER CONSTRAINT_NAME C TABLE_NAME
------------------------------ ------------------------------ - ------------------------------
SYSMAN MGMT_METRICS_RAW_PK P MGMT_METRICS_RAW
Can i recreate the SYSMAN schema index by dropping this one?
View 17 Replies
ADVERTISEMENT
Feb 15, 2011
I am facing issue of block corruption in my exp backup which I am taking through expdp command. (Refer Attachment of Screen shot of error)
I want to know few things about the block corruption.
1. Why the block corruption occur.
2. How can I resolve this.
3. Can I rosolve this by deleting the same record on which this error is coming. if yes then how can I track that row in a table.
I already tried for DB verify utility. It shows the below result.
===================================================================
C:Documents and SettingsAdministrator>dbv file='E:ORADATAAFCCV1MONETA01.DBF' blocksize=8192
DBVERIFY: Release 11.1.0.6.0 - Production on Wed Feb 16 10:13:11 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBVERIFY - Verification starting : FILE = E:ORADATAAFCCV1MONETA01.DBF
DBV-00600: Fatal Error - [28] [27070] [0] [0]
C:Documents and SettingsAdministrator>
================================================================
View 12 Replies
View Related
Jun 9, 2012
how to find the corruption block and judge whether it is physical corruption or logical corruption?
View 3 Replies
View Related
Dec 25, 2011
I have noticed a block corruption issue in my RAC database. Its an index , how to recover a corrupted index in system datafile.
SELECT tablespace_name, segment_type, owner, segment_name
FROM dba_extents WHERE file_id = 5
3 and 147551 between block_id AND block_id + blocks - 1;
TABLESPACE_NAME SEGMENT_TYPE OWNER
[code]....
We are using OCFS2 and O/S is RHEL 4.7.
View 3 Replies
View Related
Jun 24, 2013
We are facing block corruption error and it's refer to system datafile (SYSTEM01.DBF).Below is the script through it, we can come to know about the extent.
select segment_name, segment_type from dba_extents
where file_id=1 and 134144 between block_id and block_id+blocks-1;
select owner,index_name,index_type, table_name from dba_indexes
where index_name='I_CDEF3';
How to resolve the problem as it is related to system datafile? We tried to drop the index but system is not allowing to do.
ORA-00701 - object necessary for warmstarting database cannot be altered.
View 7 Replies
View Related
Jun 13, 2011
Whenever I export a schema, the logical backup (dmp file) is created with errors. The following Error is thrown. I need to know what step should I have to take to correct it.
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_REPCAT_UTL" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_REPCAT_UTL"
ORA-06512: at "SYS.DBMS_REPCAT_EXP", line 87
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_REPCAT_EXP.schema_info_exp
. exporting statistics
Export terminated successfully with warnings.
View 16 Replies
View Related
Jul 18, 2012
I am trying user managed recovery using archived and redo log files. I had restored old cold backup, then copy latest control file, redo log files, and archived log files at actual locations. Now I tried to recover database using following steps.
Quote:
connect sys as sysdba
startup mount;
recover database;
auto
After applied some archived files, one of the archived file corrupted and recovery cancel due to error, then i shut down the database. Now i want to copy corrupted archived file from backup and run the recovery further. so my question that should i have to run recovery from the beginning or can i run the recover from the last status of the database.
View 3 Replies
View Related
Jul 30, 2012
I observed logical corruption in one of the database, while running select on some tables observed ORA-01410: invalid ROWID error. These errors or errors related to this logical corruption are not reported in alert log file.
Since our database is in NOARCHIVELOG mode and regular backups are not happening through RMAN (weekly cold mount point backup to tape),
i was not able to use RMAN to investigate block corruption.
So used DBVERIFY on all datafiles of database to check the consistency of datafiles, and found DBV gives error for one of the datafile - 'Completely zero block found during dbv:' As i mentioned earlier, we are not taking regular backups using RMAN and database is in NOARCHIVE mode.
View 2 Replies
View Related
Jul 19, 2012
Recently I migrated our Oracle to new machine using exp/imp on schema basis. After import finished I had tons of invalid objects in database. I ran utlrp.sql script and lots of them got validated. Than I recompiled manually in EM those are left but two invalid objects (MGMT_JOB_UI description and body) in SYSMAN schema gave error while recompiling.
Now when I click on any scheduled jobs to edit it or view its schedule, EM throw following error:
X Error
jobType - jobType page property expected
I think its related to that invalid package. The errors while compiling the specification are as follow:
Line # = 50 Column # = 1 Error Text = PL/SQL: Declaration ignored
Line # = 65 Column # = 9 Error Text = PLS-00201: identifier 'JOBRUNTABLETYPE' must be declared
Line # = 88 Column # = 1 Error Text = PL/SQL: Declaration ignored
Line # = 107 Column # = 9 Error Text = PLS-00201: identifier 'JOBEXECTABLETYPE' must be declared
The Package specification is as below,
AS---------------------------------------------------------------------------------- type definitionTYPE CURSOR_TYPE IS REF CURSOR;-- Get the targets for this step, if any-- if p_return_display_names is false, return the target's internal nameFUNCTION get_step_targets ( p_step_id NUMBER, p_return_display_names BOOLEAN DEFAULT true ) RETURN SMP_EMD_STRING_ARRAY;-- Get the targets for this step, if any, as a comma separated string-- if p_return_display_names is false, return the target's internal nameFUNCTION get_step_targets_str ( p_step_id NUMBER, p_return_display_names BOOLEAN DEFAULT true ) RETURN VARCHAR2;-- Get the parameters for this job, filter as specified for this jobtypePROCEDURE get_visible_params ( p_job_id RAW, p_exec_id RAW, p_params_out OUT CURSOR_TYPE);-- Get the URI for this uri_use-- see emSDK/job/dtd/UriSource.java for uri_use constantsFUNCTION get_display_uri ( p_job_type IN VARCHAR2, p_uri_use IN
[code]....
View 16 Replies
View Related
Jan 25, 2011
i have an error with block corruption
Error: Corrupt block relative dba: 0x01c12a58 (file 7, block 76376)
What all the ,methods I can go for if we are working on a production environment with out any down time.
I can go for dbms repair package and restore and recover
View 3 Replies
View Related
Apr 27, 2012
Does change in segment size effect the rman backup size..??
I'm trying to understand do Rman backup the empty block from datafiles..?? And if it escape the empty block than inserting data in tables (increasing the number of used block) might change the size of total backup (Rman) size
View 2 Replies
View Related
May 2, 2013
Is this possible to recover a schema using RMAN bckup
View 5 Replies
View Related
Apr 8, 2010
I got the below error while executing the procedure. What the procedure doing is recreate the objects of one schema into another. After recreating some objects it throws the error.
code is...
1 CREATE OR REPLACE PROCEDURE SCHEMA_IMPORT6
2 AUTHID CURRENT_USER
3 AS
4 V_Objid NUMBER;
5 V_Xml XMLTYPE;
6 V_Xml_Ind XMLTYPE;
[code]....
View 3 Replies
View Related
Mar 25, 2010
I'm unable to recreate the db link (private) in another schema/database. Even its a schema object, its come without schema name while extracting from database using metadata api.
code is below (just for extracting)
CREATE OR REPLACE FUNCTION DDI.DBLINK_DDL
RETURN CLOB
AUTHID CURRENT_USER
AS
v_meta_handle NUMBER;
v_meta_handle_trans NUMBER;
V_DOC CLOB;
[code].....
View 8 Replies
View Related
Nov 8, 2012
I am getting the below error when I run utlrp in my database.
ERROR at line 1:
ORA-08102: index key not found, obj# 423571, file 6, block 113416 (2)
ORA-06512: at "SYS.UTL_RECOMP", line 760
ORA-06512: at line 4
I have run dbverify on File_id=6 but it did not return any corrupt pages or blocks.
View 7 Replies
View Related
Jul 9, 2013
While taking a full export i came to know there was a block corruption in SYSAUX tablespace. I dont have any COLD/HOTBACKUPS/RMAN BACKUPS. As i have only the Exp backups and the database is in archive log mode. Whether is it possible to recover the BLOCK CORRUPTION with exp backups.
View 12 Replies
View Related
Jul 14, 2011
have a repeatable technique for damaging a datafile block?
I need to demonstrate and contrast various recovery techniques, such as dbms_repair, RMAN block recovery, and Data Guard automatic block repair.
I'll end up with a shell script (or batch file) where I can enter a file number and block number, and wipe out that block.
View 3 Replies
View Related
May 12, 2011
1) What is PHYSICAL/LOGICAL Corruption.
2) How it occurs.
3) Will RMAN works on both the types of corruption or only Physical (My senior told it works on both).
View 3 Replies
View Related
Mar 16, 2011
The database is running in archivelog mode and we have a standby with Maximum performance.There is no RMAN backup..We have noticed there is block corruption while accessing some tables.Now i would like to know are the corrupted blocks also replicated to the physical standby? Is there a way to recover the data from these corrupted blocks without shutting down the database ?
View 1 Replies
View Related
Aug 3, 2011
rdbms:oracle 10gr2
os:windows
with reference to
[URL]......
Quote:
A.2.2 Writing Backup Scripts for Disk and Tape Scenarios
As in the disk-only scenarios, the backup scripts in this section are categorized based on database workload. as stated very clearly it depends on the workload, more precisely the rate of block change. The size of the database can be found out based on formula from
[URL]....
so how would I know the rate of block change in order to know which script is suitable for me? I try to find out the rate of block change for the database based on change tracking file but based on
[URL].....
Quote:
The size of the change tracking file is proportional to the size of the database and the number of enabled threads of redo. The size is not related to the frequency of updates to the database. So how do I determine the rate of change? can the rate of block change based on size of archive logs?
I have the following information with me:
starting from 5/10/2011 0101
ending 5/18/2011 1114
this constitute to 9.5 days
F:
ecover_area>dir/w
1644 File(s) 27,942,770,176 bytes
2 Dir(s) 10,019,270,656 bytes free
average size of each file 27,942,770,176/1644
=16996818.841849148418491484184915
average size of each day's log = 27,942,770,176/9.5
=2941344229.0526315789473684210526
about 3G
If I have a database size of 92G, based on the archive log size of about 3G per day, can I conclude that a change of 3G/92G is considered as few block change?
View 1 Replies
View Related
Sep 10, 2011
does, block change tracking file is read during incremental level 0 backup?
View 4 Replies
View Related
May 18, 2013
It seems that Oracle does not use XOR to calculate the checksum of data blocks any more. What is the new checksum algorithm?
View 3 Replies
View Related
Jun 20, 2012
i want to enable block change tracking as our incremental level1 backup take a lot of time but i have a worry which i found it on oracle support and tha is as follows Database Instance Hang at Database Checkpoint With Block Change Tracking Enabled. [ID 1326886.1]
View 2 Replies
View Related
Oct 11, 2011
i did such commands
1. RMAN -> backup incremental level 0 database;
2. SQLPLUS -> alter database enable block change tracking using file '/home/oracle/block_change_tracking.tr';
3. RMAN -> backup incremental level 1 cumulative database;
4. RMAN -> backup incremental level 1 cumulative database;
5. RMAN -> backup incremental level 1 cumulative database;
and for such order i noticed that block change tracking file wasn't used for any cumulative backup. for each cumulative backup was done full scan over database.
it was used after i did incremental level 0 backup, and again incremental 1 cumulative.
if i want this feature to be usefull i should enable it before my incremental level 0, or i should do incremental level 0 immediately after i enable it?
View 6 Replies
View Related
Aug 22, 2012
I have taken the tablespace export it came 2.1gb and for the same user i have taken the schema export it came 5.1gb
why their is a lot of difference in size?
View 3 Replies
View Related
Mar 7, 2012
I want to take backup of selected data from tables of a schema (as huge data, that is not used, causing slow query performance) I planned to create a seprate backup schema and tablespace to store the data from these tables. Then write procedures that can move the data to and fro among table of those schema. And create partitioned index on those backup tables.
View 11 Replies
View Related
Sep 11, 2011
Is there a way to restore the schema and its associated objects once it is dropped?
1. The flash back database feature is not ON in the database where schema was dropped.
2. The data files/ table space has not been dropped
3. There was no export taken for the schema.
View 4 Replies
View Related
May 16, 2012
I have a database where view v$database_block_corruption shows a corrupted block
SQL> select * from v$database_block_corruption;
FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
---------- ---------- ---------- ------------------ ---------
4 756652 1 5.5157E+12 CORRUPT
I am not able to get the relevant segment from the above information
SQL> select segment_name, segment_type, owner
2 from dba_extents
3 where file_id = 4
4 and 756652 between block_id
5 and block_id + blocks -1;
no rows selected
DBVERIFY Summary
DBVERIFY - Verification complete
Total Pages Examined : 3932160
Total Pages Processed (Data) : 3119107
Total Pages Failing (Data) : 0
Total Pages Processed (Index): 755048
[code]....
I have uploaded the complete logfile.
Below is a part of logfile
DBVERIFY - Verification starting : FILE = /prd/dvp/ora/oradata/LHF/disk06/gds_t01_01.dbf
Block Checking: DBA = 21728172, Block Type = KTB-managed data block
**** kdxcoavs = -84 < 0, avail = 3129
---- end index block validation
Page 756652 failed with check code 6401
##not here that 756652 is the same block# mentioned in v$database_block_corruption
here i tried finding the OBJECT ID as below
SELECT dbms_utility.data_block_address_block(21728172) "BLOCK", dbms_utility.data_block_address_file(21728172) "FILE" FROM dual;
BLOCK FILE
---------- ----------
756652 5
Now for the same BLOCK it is giving different File, again the segment_name or segment_id could not be found from the above information.
View 4 Replies
View Related
Oct 15, 2012
I am facing some problems in recovery on oracle 9.2.0.1.0 Standard Edition.
Quote:
ORA-00283: recovery session canceled due to errors
ORA-00368: checksum error in redo log block
ORA-00353: log corruption near block 43200 change 1021681146 time 10/11/2012 18:25:25
ORA-00334: archived log: '/oradb/odb/archivedata/ARCH0000002343.ARC'
View 3 Replies
View Related
Nov 21, 2012
What i have to do for this error:
ORA-01578: ORACLE data block corrupted (file # 3, block # 42348)
ORA-01110: data file 3: '+DGMETA/metadb/datafile/sysaux.257.783871811'
Wed Nov 21 09:30:00 2012
Corrupt Block Found
TSN = 2, TSNAME = SYSAUX
RFN = 3, BLK = 42348, RDBA = 12625260
OBJN = 50439, OBJD = 50439, OBJECT = MGMT_STRING_METRIC_HISTORY_PK, SUB
OBJECT = SEGMENT OWNER = SYSMAN, SEGMENT TYPE = Index Segment
Database version is :- Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
View 11 Replies
View Related
