Backup & Recovery :: Restore Terminated Due To Log Corruption

Jul 18, 2012

I am trying user managed recovery using archived and redo log files. I had restored old cold backup, then copy latest control file, redo log files, and archived log files at actual locations. Now I tried to recover database using following steps.

Quote:
connect sys as sysdba
startup mount;
recover database;
auto

After applied some archived files, one of the archived file corrupted and recovery cancel due to error, then i shut down the database. Now i want to copy corrupted archived file from backup and run the recovery further. so my question that should i have to run recovery from the beginning or can i run the recover from the last status of the database.

View 3 Replies


ADVERTISEMENT

Backup & Recovery :: Block Corruption In Expdp?

Feb 15, 2011

I am facing issue of block corruption in my exp backup which I am taking through expdp command. (Refer Attachment of Screen shot of error)

I want to know few things about the block corruption.

1. Why the block corruption occur.

2. How can I resolve this.

3. Can I rosolve this by deleting the same record on which this error is coming. if yes then how can I track that row in a table.

I already tried for DB verify utility. It shows the below result.

===================================================================
C:Documents and SettingsAdministrator>dbv file='E:ORADATAAFCCV1MONETA01.DBF' blocksize=8192
DBVERIFY: Release 11.1.0.6.0 - Production on Wed Feb 16 10:13:11 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
DBVERIFY - Verification starting : FILE = E:ORADATAAFCCV1MONETA01.DBF
DBV-00600: Fatal Error - [28] [27070] [0] [0]
C:Documents and SettingsAdministrator>
================================================================

View 12 Replies View Related

Backup & Recovery :: How To Find Corruption Block

Jun 9, 2012

how to find the corruption block and judge whether it is physical corruption or logical corruption?

View 3 Replies View Related

Backup & Recovery :: Block Corruption In System Datafile?

Dec 25, 2011

I have noticed a block corruption issue in my RAC database. Its an index , how to recover a corrupted index in system datafile.

SELECT tablespace_name, segment_type, owner, segment_name
FROM dba_extents WHERE file_id = 5
3 and 147551 between block_id AND block_id + blocks - 1;
TABLESPACE_NAME SEGMENT_TYPE OWNER

[code]....

We are using OCFS2 and O/S is RHEL 4.7.

View 3 Replies View Related

Backup & Recovery :: Ora-01578 - Oracle Data Block Corruption

Jun 24, 2013

We are facing block corruption error and it's refer to system datafile (SYSTEM01.DBF).Below is the script through it, we can come to know about the extent.

select segment_name, segment_type from dba_extents
where file_id=1 and 134144 between block_id and block_id+blocks-1;

select owner,index_name,index_type, table_name from dba_indexes
where index_name='I_CDEF3';

How to resolve the problem as it is related to system datafile? We tried to drop the index but system is not allowing to do.

ORA-00701 - object necessary for warmstarting database cannot be altered.

View 7 Replies View Related

Backup & Recovery :: Logical Block Corruption - Recreate SYSMAN Schema Index

Mar 3, 2010

I am facing problem of logical block curruption.

SQL> select * from v$database_block_corruption;

FILE# BLOCK# BLOCKS CORRUPTION_CHANGE# CORRUPTIO
---------- ---------- ---------- ------------------ ---------
3 61454 1 1417157166 LOGICAL
3 31256 1 1417011117 LOGICAL

OWNER CONSTRAINT_NAME C TABLE_NAME
------------------------------ ------------------------------ - ------------------------------
SYSMAN MGMT_METRICS_RAW_PK P MGMT_METRICS_RAW

Can i recreate the SYSMAN schema index by dropping this one?

View 17 Replies View Related

Backup & Recovery :: Database Session For Channel Sbt_4 Terminated Unexpectedly

Feb 23, 2012

Backup for database has been working fine until today.
Today, about 1/3 of the way through the backup (large database), I got this...
RMAN-12005: error during channel cleanup
RMAN-10038: database session for channel sbt_4 terminated unexpectedly
...and the backup died.

Never seen before and the research I've done online has been less than useful. This database is an SAP/oracle db with brtools 7.20 (22) and is using the new parameter in its init.sap file, called "_rman_chan_failo = yes", to address disagreement between brtools and oracle about channel drops being ok if all datafiles backed up.

Nothing in the alert log at the time of this error.

View 4 Replies View Related

Backup & Recovery :: RMAN Restore / Recovery To Previous Cold Backups

Aug 13, 2013

My scenario is: database is in archivelog mode.

I run DLY cold backups including controlfile & archivelogs and keep 3 gens of backups and archivelogs to 3 days also. What is the correct procedure to restore back to an old cold backup. Database is backed up Mon,Tue,Wed on Thur we require to bring database back to Tuesday DLY security.

I have tried:
startup mount
restore database from tag 'DLYTUE'
recover database

( this just rolls forward on all archive logs once it restores datafiles, not getting to point to alter database open resetlogs.)

Next tried to :

recover database archivelog tag 'DLYTUE'
( same outcome )

What is the correct rman procedure including should I remove old archive logs from working OS directory ? Also need to know once I restore back and open database to TUE security how do you tidy up the archive logs and dumps which are no longer require i.e. : weds..

I have read about using the set until time option but how to I get absolute time from when cold backup completed if this is the correct procedure.

View 9 Replies View Related

Backup & Recovery :: Finding Rman Restore And Recovery Process?

Feb 7, 2011

I have a doubt regarding the process the RMAN follows for restore and recovery of the database.

My Level 0 full backup completes on Saturdays at around 11 am after taking 8 hours (It starts at 3am).On Sunday, I ask RMAN to restore (on a different box) till Saturday 11:30 am.Then, after the restore is successful, I recover it till 11:45 am.

The recovery also goes fine and Iam able to clone to test box.

Till what time is the database restored? I assume its till 11 am since the L0 backup finishes at 11 am though I have asked it to restore till 11:30 am

During the recovery, ONLY the archives generated between Saturday 3 am and till the time i asked for recovery (Saturday 11:45 am ) are required. But, checking the recovery log file, i was surprised to see that RMAN has restored archive files starting from Friday 9:30 pm (Much before the time the Level 0 backup even started).

why does RMAN require the old archive log files.

View 4 Replies View Related

Backup & Recovery :: RMAN Duplicate Set Until Time Using Wrong Backup Piece Name To Restore?

Feb 26, 2012

We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.

For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.

RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit

Is there a way on how to let RMAN use the latest backup pieces instead?

View 1 Replies View Related

Backup & Recovery :: Restore Dropped Or Wrongly Updated Table Using RMAN Backup?

Feb 9, 2011

Is it possible to restore dropped table OR wrongly updated table using RMAN backup.

View 18 Replies View Related

Backup & Recovery :: Restore RMAN Backup In New Server / Got Error 06172

Jun 21, 2011

We are using Oracle 10g R2 in Windows Server 2003. I'm trying to restore a database in a new server, using RMAN backups.

Our external consultant configured RMAN scripts for full and incremental backups but never tested them . Since he just doesn't show up, I'm forced to tested them, restoring the whole database in a new server.

My instance is named MTDPROD, and I will create all from scratch.

At current server, RMAN files are generated in:
//192.168.1.149/g$/XXXSRV4-ArcLogs/MTDPROD/RMAN

At new server, I run all these commands:

C:>oradim -new -sid MTDPROD -intpwd mtdprod
Instance created
-- I created the relevant folder hierarchy under <ORACLE_BASE>
directory
-- Then, I created the relevant directories for Oracle Database, as
follows:
--a. Create BDUMP, CDUMP, and UDUMP directories under '<ORACLE_ BASE>

[code]....

By instance, I see a lot of this kind of files:

- FULL_MTDPROD_20110529_386_1.BAK
- INCR_MTDPROD_20110621_480_7.BAK
And only see these two files:
- C-2169285856-20110527-03
- C-2169285856-20110527-04

It seems that this C-2169285856-.... files only were on 27/05/2011 and then no more. However, the FULL_... and INCR_.. files are generated every day. The FULL is generated at the end of each month and INCR is generated every day.

This is the backfull.sql:

run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 0
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANFULL_

[code]....

This is the backincr.sql:

run {
allocate channel c1 type disk maxpiecesize=4G;
CROSSCHECK archivelog all;
backup
incremental level 1 cumulative
format '\192.168.1.149g$XXXSRV4-arclogsMTDPRODRMANINCR_
%d_%T_%s_%p.bak'

[code]....

View 6 Replies View Related

Inputs On RMAN Backup N Recovery For Multiple Restore Of Clean Backup?

Nov 7, 2010

We have the requirement of performance testing of our proposed production platform, for this i am asked to take RMAN backup of clean position (Say Day0 or baseline backup) and restore it multiple times for few rounds of testing. My question is after 1st restore (with set until time of day0 position) if i open the database with resetlogs, would i be able to restore same clean backup again? I am using control file in the environment instead of RMAN catalog database. What i can do to make this scenario work? I am already in preperation of setting rman catalog database.

View 3 Replies View Related

Backup & Recovery :: Restore Rman Backup On New Server As Different Name Sid / Service / Listener

Feb 13, 2012

I am attempting to use an rman backup form our live server to restore live data over an existing dev database with a different name. I cant use the duplicate command as the versions of oracle are different (10.2.0.4 EE on live, 10.2.0.5 SE on dev) So I copied the backup sets including an autobackup control file onto the dev server. I set the ORACLE_SID to the DEV version (SUN43DEV) and startup nomount and restore controlfile from the backup location. This works and restored the live controlfile. However, I then wanted to mount the database and catalog the backupsets before making a note of the last archivelog etc and restoring the backup with set newname options. But when I try to mount the database I am told that the database has a different name (SUN43 is not SUN43DEV). I read somewhere that I need to set the ORACLE_SID to the live value (SUN43) and restore as that, then use nid TO RESET THE DBID and DATABASE NAME. However, my tnsnames on DEV has no entry for the live database, and we do not have any service defined through ORADIM for the live instance on the dev server. Should I be creating an entry in DEV tnsnames that actually looks at the LIVE server? or do I need to create a service and tns entry etc for SUN43 on my DEV server pointing at the DEV server I have not seen any mention in instructions of creating a service or adding the entry to tnsnames, or indeed adding an entry to the listener for the original live sid. I am worried that if I actually point to the live server then the restore would be attempted on the live server not dev even though I am running it from Dev.

Also, do I need to drop the existing database on DEV before I restore or will RMAN just restore over the top of it?

Finally, if I try to add an entry to the LISTENER.ORA for the new sid, when I stop and start the listener, or reload, the entry is not recognised. I also noticed that the existing SUN43DEV entry is not in there either, yet I can still use that SID - I am assuming that is because the listener is not being used and the sid is recognised from the existence of the service in windows services instead?

View 2 Replies View Related

Backup & Recovery :: Restore DB From Control Files Using Symantec Backup Exec

Jun 10, 2013

I am having a issue, we are trying to restore our db from control files using Symantec Backup exec, but job fails giving me error go to table spaces select all table spaces and unchecked roll forward.

i am unable to find way to uncheck the table spaces. Here is the complete description.

Cause

The system catalog tablespace "syscatspace" contains all of the system catalog information for the tables. Syscatspace needs to be rolled forward first, and then the other tablespaces must be rolled forward.

Solution

Workaround:

When the restore operation is run from a tablespace level backup, perform the rollforward for the syscatspace tablespace first and then for other tablespaces.

Execute the rollforward operation as a DBA operation. The sequence of the recovery process should be as follows:

1. Select all tablespaces, uncheck the rollforward option and run the restore job.
2. Run the rollforward operation as a DBA initiated operation:

rollforward syscatspace to point in time / end of logs. e.g. db2 => rollforward database UEXIT to end of logs and complete Tablespace (SYSCATSPACE) online

3. Perform rollforward of all other tablespaces.

e.g. db2 => rollforward database UEXIT to end of logs and complete tablespace (SYSTOO LSPACE,USERSPACE1) online

Refer to IBM DB2 documentation for more information on DBA-initiated operations.

View 9 Replies View Related

Backup & Recovery :: RAC - RMAN Restore And Recovery To New Hosts?

Mar 13, 2012

1. My RAC (old RAC) had got a failures from one node, then there was only one existing node now.

2. I configured a RAC (new RAC) on 2 other servers, both of them (old-RAC and new-RAC) has got same OS version, platform and Oracle version release.

3. I took a full backup yesterday plus archivelog in the node of old-Rac, configure NFS in new-Rac to make the backup within remote-share NFS.

The only problem still now that I've restore/recovery/duplicated single instance, not Rac. So, may you guide me to do it?

Information:

Old-Rac & New-Rac:
+ Cluster 11g: CFS
+ Database: 2 nodes with same instance name (cbs1-cbs2)
+ Location for CRS_HOME and ORACLE_HOME: Same to be.
+ Location of archivelog: Same to be (+ARCHIVE)

View 1 Replies View Related

Backup & Recovery :: Restore Time Based Recovery

Apr 28, 2011

How can i take a cancel based recovery and time based recovery using rman. ?

View 3 Replies View Related

Backup & Recovery :: Restore Database From Obsolete Backup Using RMAN

Dec 13, 2011

can we restore database from obsolete backup using rman

View 2 Replies View Related

Backup & Recovery :: Restore / Recover Level 1 Backup On New Server

Jan 31, 2011

I am trying to create my database on a new server using rman incremental hot backups.

I have already restored and recovered my level 0 database on new server, but i am not able to restore/recover the level 1 backup on the new server. I have transported level 1 backup irom the old server to the new one. Do i need to recover lvl 1 bkp only or restore it also.

View 1 Replies View Related

Backup & Recovery :: SPFILE Restore From Auto-backup No Catalog

Aug 1, 2012

I need to restore entire database(sp+control+datafile) to new host.I have started the instance with nomount( and it has created a dummy parameter file).Now, I need to fire the command to restore spfile.

RUN
{
ALLOCATE CHANNEL c1 DEVICE TYPE sbt PARMS='...';
RESTORE SPFILE TO PFILE '?/oradata/test/inittrgta.ora' FROM AUTOBACKUP;
SHUTDOWN ABORT;
}

My questions:-

1.How will RMAN find the location of backupset(Since there is controlfile for neither target or catalog database)?

2.How does RMAN reache the backupset in case of a)tape b)disk?

View 4 Replies View Related

Backup & Recovery :: RMAN - Time Interval Backup And Restore?

Mar 27, 2012

I have been updating data in my database by adding numerous rows and assume the insertion of rows started from 1st date of january month.

I have been entering somehow or the other part of data every day.And now the date is 25th of january.

How can i take a partial backup of my database of the transactions done between 15th of January to 20th of January Month

How to take Backup of a particular date say it be 12th of january month.

How to take backup of first 10 days i.e., 1st-10th of january.

View 7 Replies View Related

Backup & Recovery :: Restore Incremental Backup To New Server?

Jan 31, 2011

n my last post I asked abt the issues that I was facing while restoring the full backup of RMAN on a new server. I mentioned the steps as well, Now my Question is what If I want to restore the incremental backup on the new server?

What all steps do I have to follow after restoring the zero level backup on a new server.

View 18 Replies View Related

Backup & Recovery :: How To Restore Full Backup On A Media

May 13, 2012

my restore scenario bellow.

I have hot full backup that processed by NetBackup Policy. the backup policy are;

1.Full backup database in Monday. Daily_Monday_RMAN <- 1 volume pool=1 media
2.Full backup database in Tuesday .Daily_Tuesday_RMAN <- 1 volume pool=1 media
3.Full backup database in Wednesday. Daily_Wednesday_RMAN <- 1 volume pool=1 media
4.Full backup database in Thursday. Daily_Thursday_RMAN <- 1 volume pool=1 media
5.Full backup database in Friday. Daily_Friday_RMAN <- 1 volume pool=1 media
6.Full backup database in Saturday. Daily_Saturday_RMAN <- 1 volume pool=1 media

How to restore database from one of medias?

View 5 Replies View Related

Backup & Recovery :: Restore Control File Backup

Feb 10, 2011

I take hot backup of database at 10:00 am.After taking the hot backup 50 archived logs are created.Out of 50 i have backed up first 25 of them and at 5:00pm i lose complete database including control,data and the last 25 archived log files that were not backed up.So I am using latest hot backup to recover

I restore the control file backup and datafile backup taken during ho tbackup(10 am) and i issue the command

.......startup mount
>>>>>>>Recover database until cancel
!!!!!!! Apply the available 25 archive logs

then i give "cancel" since I dont have the next redo log .Now in which mode will the database open(Reset logs or no reset logs)

View 6 Replies View Related

Backup & Recovery :: Restore Fails On Archived Log Which Is In Backup Set?

Dec 2, 2011

I ran the Full database backup as,

RUN {ALLOCATE CHANNEL CH0 TYPE 'sbt_tape';
BACKUP DATABASE FORCE PLUS ARCHIVELOG FORCE NOT BACKED UP DELETE INPUT;
RELEASE CHANNEL CH0;
}

Then I ran the restore, it failed with Quote:RMAN-06054: media recovery requesting unknown archived log....

When I backup archivelogs and choose to delete the input, it does not delete the multiplexed copy, but the specific file being backed up.So, ideally it should find it in Flah Area or at least in the backed up pieces which are there with it.Still why is it failing?

Also, in recovery, it is deleting the archived log after applying, RMAN does this if we use recover... delete archivelog command.I am using only RECOVER, still in output I can see RMAN deleting the log after it has applied it. WHY?

View 3 Replies View Related

Backup & Recovery :: To Restore Control File From Backup Set

Dec 9, 2011

I want to restore control file from backup set,just as the flowing command,where location does the control file be restored to? how can i specify the location when restore control file?

restore controlfile from '/u01/rman_backup/mybak/df_768589733_7_1.bak';

View 2 Replies View Related

Backup & Recovery :: RMAN Tablespace Backup And Restore?

Sep 7, 2012

i want to clone the test db to dev db but i dont want default users and tablespaces(SYS,SYSAUX,...) in the test db datapump and exp are not working, then contacted ORACLE support and they concluded that test db sysaux was corrupted.i took RMAN all tablespace bkup except default tablespaces. then created new database using DBCA and now i want to restore and recover all those test db tablesapces but while i'm doing restore its saying

RMAN> restore tablespace MAIN_DATA;

Starting restore at 07-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=129 device type=DISK
creating datafile file number=20 name=/opt/oracle/oradata/DEV71/main_data01.dbf
restore not done; all files read only, offline, or already restored
Finished restore at 07-SEP-12

i created all tablespaces in dev same as test db,

View 6 Replies View Related

Backup & Recovery :: Backup And Restore On Different Server?

Jun 14, 2013

I would like get a copy of an oracle 10g database off the production server(windows 2003) and set it up on Windows 2003 virtual server to use for dev/testing.

What would be the safest and most efficient way.??

View 2 Replies View Related

Backup & Recovery :: Restore Backup At New Machine?

Nov 7, 2012

We need to migrate database from old machine to new machine. This is because our SAN storage need to be change due to file system.

Old machine setup with RAC and using 10g. Is it possible i restore at single machine only? The backup on the NAS. SAN act as ASM only.

View 1 Replies View Related

Backup & Recovery :: Restore Backup Of Database A From Into B

Jun 16, 2013

I need to restore a backup of database A from into Database B. Both have the same names. Database B is already up and running.

I have a full rman backup of Database A ( it was taken with a recovery catalog which I don't have access to now as it was deleted ). I just have the full backup pieces including the control files. Is it possible to recover this database into Database B from this stand point.

I was thinking

2. Shutdown database B
3. Mount database B. It has same name as Database A.
4. With RMAN restore controlfile. Will a new controlfile be created from the backup directory I have the rman pieces for the full backup in ?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved