So I try to back it up first by using the below command:
RMAN> backup archivelog all;
Starting backup at 04-JUN-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
[code]......
I know that I have to extend the db_recovery_file_dest directory for "limit exceed" error but how can I safely delete the archivelog in order to bring up the database?
SQL> SELECT * FROM V$VERSION; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod PL/SQL Release 10.2.0.1.0 - Production CORE 10.2.0.1.0 Production TNS for Linux: Version 10.2.0.1.0 - Production NLSRTL Version 10.2.0.1.0 - Production
after i backup my database,i check the alert log ,i found the following errror:
Mon May 14 09:19:42 2012 Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc: Mon May 14 09:19:42 2012 Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc: Mon May 14 09:19:42 2012 Errors in file /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc:
[code]....
the trace number 26967 :
[oracle@shenzhengair archivelog]$ cat /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc /u01/app/oracle/admin/szcargo/udump/szcargo_ora_26967.trc Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
online backup done thru RMAN.Suppose i am taking online backup of full database. During the backup, user's are inserting/deleting/modifying data. This data is getting stored as online archives. Once the database backup is finished, how these archives are applied to the database to make the database up to date.
I have taken the RMAN Full database backup through the following command.My database is in no archivelog mode.
AT RMAN prompt Shutdown immediate; Startup mount; run { allocate channel c01 device type disk format 'd: man_bkp est_%U'; allocate channel c02 device type disk format 'd: man_bkp est_%U'; backup full database tag 'full_bkup_test_081111'; backup current controlfile; backup spfile; release channel c01; release channel c02; }
Now i have deleted my all controlfile and spfile/Pfile from the database.So how can i recover my SPfile and controlfile? i do not have autobackup on of SPfile/Controlfile.
We would take backup regulary by RMAN(catalog). Last two days we could not take backup. Backup start but after take backup some datafile then rman does not do anything.
I have migrated my database to oracle and while migration i have followed all instructions and migrated to oracle.the connection and user having my tables and all object is
con name: orcltestcon user: orcltestuser and password: orcltestuser.
I want to turn on ARCHIVELOG Mode ON.
1) Is it good practice to turn on archivelog. also tel me cases where it is good. 2) to turn on ARCHIVELOG , with which command i should connect.
1) CONNECT SYS/<password> AS SYSDBA; or 2) CONNECT orcltestuser/orcletestuser AS SYSDBA.
I'm on a Windows server 2003 R2 64 bit, database is 11.1.0.7. From RMAN connected to the target and the catalog, this is a show all;
RMAN> show all;
RMAN configuration parameters for database with db_unique_name ORCL are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 3 DAYS; CONFIGURE BACKUP OPTIMIZATION OFF; CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:oracleadmin
[code]....
I'm running incremental backups, a level 0 on sunday and a level 1 the other days of the week, this is the ctl file:
LEVEL 0: connect target /@ORCL connect catalog rman/rmanpw@rmancat RUN {
[code]....
The level 0 does delete the archive logs (because of the delete input). Each backupset has two copies of the archive logs (which is what I want), and I expected the logs to be deleted after being backed up 2 days (each day is twice, 2 days = 4 times). But it's not deleting the logs, even after 6 runs.
am trying to run rman backup plus archivelog TO tape disk my rman configuration settings are as seen below
RMAN configuration parameters are: CONFIGURE RETENTION POLICY TO REDUNDANCY 2; CONFIGURE BACKUP OPTIMIZATION ON; CONFIGURE DEFAULT DEVICE TYPE TO DISK; CONFIGURE CONTROLFILE AUTOBACKUP ON; [code].....
get the following error when i do this, RMAN-03009: failure of backup command on C3 channel at 01/03/2013 11:33:45 ORA-00600: internal error code, arguments: [ksfdfetch1], [], [], [], [], [], [],
I am tryign to run a split onlike full backup from the os useign the sap command which is linked to rman..Command that i am useing is ...
brbackup -u / -c force -t online_split -m full -p initBR1_onlinefull.sap
The backup goes thru but i get this erro on the end...
BR0522I 57 of 57 files/save sets processed by RMAN BR0280I BRBACKUP time stamp: 2011-01-26 12.23.26 BR0505I Full database backup (level 0) using RMAN successful BR0280I BRBACKUP time stamp: 2011-01-26 12.23.28
[code]...
Copyright (c) 1982, 2007, Oracle. All rights reserved.
I am using the following query to determine if my rman backup succeeded for failed. I look for "COMPLETED WITH ERRORS"
col input_type format a10 col bck_hrs format 99.9 heading "Run|Time" col status format a21 col end_dt format a20 heading "End|Time" col mbytes_per_sec format 9,999 heading "Output|Rate|MB/sec"
[code]...
output ======
End Run Output Rate INPUT_TYPE STATUS Time Time Size GB MB/sec ---------- --------------------- -------------------- ----- ---------- ------ ARCHIVELOG COMPLETED 2011-12-24 06:03:54 .5 189.4 106 DB INCR COMPLETED 2011-12-24 05:33:05 9.3 3,392.6 103 ARCHIVELOG COMPLETED 2011-12-23 10:12:27 .2 73.3 105
I know that the DB INCR is an INCR 0 backup but is there some way query I can join with my example above to tell me this is INCR 0 or FULL BKUP?
I was thinking maybe setting "COMMAND_ID" some text like INCR 0 or INCR 1 or FULL BKUP. Does that sound feasible
i have one question regarding archivelog and backup if i take just backup excluding archivelogs like = RMAN>backup database; (not plus archivelog ) now when even i recover database using backup , will it also recover changes that was in archives?
Then it archives the current redo and switches to next redo.
If again switching is done, then just wanted to know if redo is archived when its size is less than log_buffer, then is it resumed when it is switched into next time or after archiving it creates a empty redo file and then use it?
7 of days ago Full backup has been taken to disk due to issues with tape devices.3 days ago tape devices have been fixed and we switched to CommVault managed tape backups. CommVault calls RMAN with following command:
These backups done successfully.Then archivelog backup taken similar way.But when I issue RESTORE DATABASE PREVIEW SUMMARY; RMAN starts with Full backup set, though newer Incremental Level 0 ones are available.Why it does not use these newer ones?
I configured recovery catalog and started Full online backup using EMC Networker. In EMC Networker I set three months policy to keep Backup.I didn't change redundancy.
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
My question is, if I need to restore Backup of last 15 days then I can ?.
We are having 5 schemas in one database. Now we need to move Oracle server from one machine to another. I can take schema level back up using Export and Import in new server. I am not a DBA as we don't have a DBA I need to do this myself.
I want to know Is there an option to take full database back up including tablespaces and all the schemas in one shot. I read that RMAN is one option. But any option using EXP/IMP for same?
My plan is
-Take list of Tablespaces and create them in new server -Take Exports of schemas from original server -Create schemas and import the data in new server.
One of my Friend gets error While datapump Export backup of Full database.
Pfa below error details:-
ORA-31693: Table data object "RADIOMIRCHI_PIP_HRMS"."GM_DEPT" failed to load/unload and is being skipped due to error: ORA-02354: error in exporting/importing data ORA-00604: error occurred at recursive SQL level 3 ORA-21780: Maximum number of object durations exceeded. [code]......
SQL> alter database mount; Database altered. SQL> alter database open resetlogs; alter database open resetlogs * ERROR at line 1: ORA-01139: RESETLOGS option only valid after an incomplete database recovery
My database is in NOARCHIVELOG mode.I took whole DB backup ( cold).Then just after half an hour I ran following script.
RMAN> RUN { RESTORE DATABASE;RECOVER DATABASE;alter database open;}
Starting restore at 24-FEB-12 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=133 device type=DISK channel ORA_DISK_1: starting datafile backup set restore
[code]...
Starting recover at 24-FEB-12 using channel ORA_DISK_1
starting media recovery archived log for thread 1 with sequence 2 is already on disk as file /u01/app/oracle/oradata/PROD/redo02.log archived log file name=/u01/app/oracle/oradata/PROD/redo02.log thread=1 sequence=2 media recovery complete, elapsed time: 00:00:01
[code]...
Why do I need to specify an option at the first place?As my redo is intact, it is not incomplete recovery and, I do not want to generate new incarnation of my database.Why oracle simply not opening my database?
I have oracle 10g installed on my system and name of the database is "ORCL" for which I have schedule the incremental backup everyday. Mentioned below are the steps followed
*************PARAMETERS TO BE CHANGED****************** configure channel 1 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; configure channel 2 device type disk format '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalstd_%U'; CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '\192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incrementalcntrl_%U'; CONFIGURE RETENTION POLICY TO REDUNDANCY 7; CONFIGURE CONTROLFILE AUTOBACKUP ON; *******************************************************
*******COMMAND FOR THE CONNECTING TO RMAN************** rman LOG = \192.16.17.140dbbackups192.16.17.152oracle_rman_backup_incremental rmanlog_%date:~4,2%-%date:~7,2%-%date:~10%.txt APPEND CONNECT TARGET SYS/ORACLE@ORCL *******************************************************
********INCREMENTAL BACKUP COMMAND********************* RUN { BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE; BACKUP ARCHIVELOG ALL DELETE INPUT; } ********************************************************************
Now I want to restore this backup to some other system with new database. How to do this recovery to some other database on new system.
I have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options ORA-39002: invalid operation ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
