I have one query regarding ORACLE 10g RAC.
I have installed 10gRAC [10.2.0.1] on VMware.
now I have requirement to upgarde it this existing RAC setup to 10.2.0.4.
options for me the steps or sequence I need to follow in upgrade path? like first needs to upgarde crs,then fro ASM and lastly for DB something like this.
I am testing upgrade from 11.1.0.6 to 11.2.0.2 patchset on linux X86-64 version. And facing the following component related issue.
The following components cannot be upgraded as the corresponding upgrade scripts are missing:
OLAP Analytic Workspace ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/apsdbmig.sql )
OLAP Catalog ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/amddbmig.sql )
Spatial ( /u01/app/oracle/product/11.2.0/dbhome_3/md/admin/sdodbmig.sql )
Oracle OLAP API ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/xoqdbmig.sql )
If you want to upgrade these components, you must first install them, using the OUI, and then re-run the Upgrade Assistant. Do you want to continue with upgrade? Note: If you continue, the above components will not be considered as part of the upgrade process.*
Following is the status of the specified components from 11.1.0.6
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 11.1.0.6.0 VALID
SDO Spatial 11.1.0.6.0 VALID
APS OLAP Analytic Workspace 11.1.0.6.0 VALID
Should I install these components while installing 11.2.0.2 patchset prior upgrading? I was unable to find any component installation on OUI.
Also DBUA pre-upgrade asked to remove existing UltraSearch from 11.1.0.6 prior upgrading. Though I removed it, but not sure is that going to hamper the upgraded DB, as I'm not sure of the usage of this component as well.
Know the Patch set number to upgrade a Oracle 10.2.0.1 to 10.2.0.5 on Solaris 10 Spark 64bits?
View 1 Replies View Relatedwhere I can download patchset to upgrade my database from 10.2.0.3 to 10.2.0.5?
View 1 Replies View RelatedI am trying to upgrade the database 32bit from 10.2.0.1 to 10.2.0.4 version in Linux 32 bit . I faced the version incompatibility error during patch set installation and hence ran the patchset installation with -ignoresysprereqs option.
Now during the patchset installation i encountered the below error in in the install logfile.
**************************************
INFO: Start output from spawned process:
INFO:
--------------------------------------------------------------------------------
INFO:
INFO: /u01/app/oracle/product/10.2.0/bin/genclntsh
INFO: genclntsh: genclntsh: Could not locate /u01/app/oracle/product/10.2.0/network/admin/shrept.lst
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO:
INFO: End output from spawned process.
INFO:
--------------------------------------------------------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/10.2.0/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2012-06-24_11-45-11AM.log' for details.
Exception Severity: 1
***********************************************
Provide me the certified os and versions for oracle db 10gr2
I had two installations of Oracle on my server (10.2.0.4 and 11.2.0.1) under different linux users. The Databases used different listeners on different ports.
I upgraded my Oracle 11g to 11.2.0.3 successfully two weeks ago. However today I just checked that I couldnt reload my Oracle 10g Listener. On further analysis (lsnrctl status) I discovered that my 10g listener's version was "TNSLSNR for Linux: Version 11.2.0.3.0" . My Start Date from lsnrctl gives me the date when my Oracle 11g was upgraded.
Now I have tried to reload my 11g listener which works normally. I cannot reload my 10g listener (TNS-01190: The user is not authorized to execute the requested listener command). When i run ps command there is no process on my server for my 10g listener. I can only see my 11g listener process after running ps command. However everybody can ping my databases on Oracle 10g but i cannot identify or kill my listener process even on server level.
I want to upgrade my Oracle version from 10.2.0.1.0 to 10.2.0.4.0 but but i don't know what are the correct ways. i read the read me file in the patch set and fallowed the steps but its giving me error e.g. "Error in writing to file D:Oracleproduct10.2.0.2.0inoraevrus10.dll" every time. We have no RAC and Cluster Environment.
View 10 Replies View RelatedWe are running Oracle Enterprise software on various client and DB servers and we are experiencing a problem (outlined here [URL] .....) where the apparent mismatch between the oracle drivers are causing the errors.
Our db servers are using 10.2.0.4 and 10.2.0.5 drivers and the clients are using 10.2.0.1.
Firstly, are the drivers the same on the Express and Enterprise editions so that if I update a development server using Express version (I don't have the authority to upgrade the Enterprise version nor the time to commission that) and it is successful, can I reasonably expect an upgrade to the Enterprise client versions on other servers to be safe/error free, baring environmental factors of course ?
Secondly, can I upgrade to version 10.2.0.5 now or do I have to go to the 11g version only ?
Mistakenly I have configure dataguard on different versions. Primary is 11.2.0.3.0 and Stand By is 11.2.0.1.0. Log shipping is perfectly working, but cannot put Stand By in read only mode.
View 3 Replies View Relatedwhat jobs will be created when we upgrade to oracle 11.1 version ?
View 4 Replies View RelatedHow to apply patchset (10.2.5) with no downtime?
My db version is 10.2.4 and OS is hp-ux
We are planning to upgrade a database from 9.2.0.8.0 to 10.2.0.4.0.We have a lot a PRO*C programs pre compiled using 9.2.0.8.0 (and most likely even 9.2.0.7.0) compiler.
if we could upgrade the database without having to re-compile all the programs.We have tested this approach against some of our programs. Most of them executed fine - but in 2 cases we are getting "ORA-01001 invalid cursor". I suspect, that the case is that Pre compiler version 9 is not supported against 10g databases - but I am not sure.
Would it be a better option to upgrade Pre compiler/client as the first step and the db as the second step (and would that be supported) ? We definitely don't want to upgrade both Pre compiler/Client and the Database in one goal - that would be too risky.
Platform: windows 64 bit
Oracle database 11.2.0.3
I successfully upgraded my database from oracle 11.2.0.1.0 to 11.2.0.3.0 and the upgrade worked fine. I installed the 11.2.0.3.0 in a new oracle home.
Now my task is to install the latest patch set release on the new oracle home(Make database upto date with latest fixes indeed). I am confused with the available documentations in my oracle support.
As CPU is now considered as a subset of PSU patch, i believe i have to apply the latest PSU only.Is this correct? Is there a step by step guide for applying latest patch?I saw there are 5 PSUs released (latest 11.2.0.3.5), do i need to apply each of them or just this final one?
Give me the latest available patchset/patch(Still not clear) install guide and latest available patch download links.
1)What is the use of inventory?
2) Global inventory is found by checking the oraInst.loc file. How to find the location of Local inventory?
3)Why is every patchset(11.2.0.2) now a full release?
I have a report of version 10g . I want to run this report in oracle reports 6i version.
View 1 Replies View RelatedI am using Oracle 11g version, I wanted to check if a particular function is available in the earlier version of Oracle (Say 9i). Oracle optimizer to run the query only using the features available in the 9i version?
View 4 Replies View RelatedI'm planning to upgrade a small database (~150GB) from 10.2.0.3 on windows 2003 23bit to 11.2.0.3 RAC on Linux 5.8.The database contains oracle spatial too. A suitable method and link to document to be followed.
View 2 Replies View RelatedI recently performed an upgrade on a new server from oracle 10gr2 to oracle 11gr2 (11.2.0.3).
I take the rman backup from oracle 10g server and restore it on new server where I installed oracle 11gr2.
But on my previous oracle 10gr2 server I enabled the auditing. After doing successful upgrade now when I try to login with any user except sys I receive the following error:
SQL> conn scott/tiger
ERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
ORA-02002: error while writing to audit trail
ORA-00604: error occurred at recursive SQL level 1
ORA-00904: "OBJ$EDITION": invalid identifier
I got the workaround by setting the parameter audit_trail=FALSE (Previous value was DB_EXTENDED) .But I want my auditing to be enabled as per y requirements.
is the upgrade patch the same for standard edition and enterprise edition or there are two separate patches?
View 5 Replies View Relatedfind reference note IDs for DB upgrade from 11.2.0.2 to 11.2.0.3.2, as I am finding only Exadata which I don't want but I want to find for Ebiz database, on OS - Solaris 10 9/10 s10s_u9wos_14a SPARC.
View 1 Replies View RelatedAlong with existing RMAN backups we do Exports - of our DB using and OS User and Oracle Wallet.Of the DB's we have upgraded the Data Pump Directory
Select * from dba_directories; (there are other commands to get this info as well).
I captured screens from the DBUA upgrades, but did not see an option to change this information.Is there a way to feed this information to the install moving forward. IE, ./DBUA -silent ?
Also, anyone tracked the percentage of storage increase from 10.2/11.1 to 11.2.
All my sys tables are very slow after my database upgrade from 10.2.0.4 to 11.2.0.3 on AIX 6.1
For example
select * from ALL_TAB_COLUMNS; -- taking 19 seconds in 11.2.0.3 and few millisec in 10.2.0.4
I have deleted and updated fixed and dictionary table statistics , till I facing this issue
I want to load XML into base table using PL/SQL procedure.For that I have wrote procedure but that does not work well .
View 4 Replies View Relatedselect code,inv_date,inv_co_code,inv_co_name,inv_fnd_code,inv_fnd_name,inv_amount,inv_nofu
from retreport order by inv_co_code, inv_fnd_Code,inv_date
STAT INV_DATE CODE NV_CO_CODE INV_CO_NAME INV_FND_CODE INV_FND_NAME INV_AMOUNT INV_NOFU
----- ------ -------- ----------- ------------ -------------- ---------------------- ----------------------
I 28/06/2010 117 13 CAD 1 MCB 15104708.75 148375.7308
I 01/07/2010 13 CAD 1 MCB 2804.7464
I 30/08/2010 117 13 CAD 1 MCB 700000.00 6882.2380
I 30/08/2010 117 13 CAD 1 MCB 9500000.00 93401.8018
R 31/08/2010 117 13 CAD 1 MCB 39315.8646
R 08/09/2010 117 13 CAD 1 MCB 24515.9089
6 rows selected
STAT I = IN STOCK
STAT R = OUT STOCK
I need FIFO Query First in Fist out (INV_NOFU)
STAT CODE INV_CO_CODE INV_CO_NAME INV_FND_CODE INV_FND_NAME INV_AMOUNT INV_NOFU BALACNE
----- ------ ----------- ----------- ------------ -------------- ---------------------- ---------------------- ------------
I 117 13 CAD 1 MCB 15104708.75 148375.7308 148375.7308
R 117 13 CAD 1 MCB 39315.8646 109059.8662
R 117 13 CAD 1 MCB 24515.9089 84543.8773
I 13 CAD 1 MCB 2804.7464 87348.6237
I 117 13 CAD 1 MCB 700000.00 6882.2380 94230.8617
I 117 13 CAD 1 MCB 9500000.00 93401.8018 187632.6635
I am trying to sort columns base on cluster and alpha numeric field.
Column1 Columns2 column3
1 2-CA6R-234 9
1 2-CA6R-231 8
1 ARCT-0037000000ewegZ 10
2 2-QIZFF7 1
3 2-PIZFF6 6
3 ARCT-0037000000ewipk 9
3 2-QIZTF7 1
Wanted to sort in a way that column1 will be same order and the second column will order first with ARCT-XXXXX and then reset of the column2. It should look like this
Column1 Columns2 column3
1 ARCT-0037000000ewegZ 10
1 2-CA6R-231 8
1 2-CA6R-234 9
2 2-QIZFF7 1
3 ARCT-0037000000ewipk 9
3 2-PIZFF6 6
3 2-QIZTF7 1
How to find out the base table of a synonym?
View 3 Replies View RelatedHow to create a view without base table . some example?
View 8 Replies View Relatedcan I add a session (php code) to base.htm file?
if yes, what i have to do?
I am trying to develop an application of cars. The car have marques example :
TOYOTA,HUNDAI,CHEVROLET
each mark have families example: TOYOTA have Hilux, yaris corola, CHEVROLET have opra,...etc. Each family have a lot of models example: hilux have h2kn-clim,.. etc. And finally there are some options witch are generally in all cars example Radio-k7,air-conditioner ... etc.
option 1..n-----------------1..n model the relation call(opt_mod)
i did develop the block of marques (master) and the block of families (detail) in a form 1. i did develop the bock of models(master) in form 2 and the is no problem. but i want to add to form 2 the block of (opt_mod) but the user did tell me that he want to to see all options with check boxes .
As a solution of this problem i want to build a block on LEFT JOIN between table :option and table :opt_mod
How do I change the status of a block to change?
View 7 Replies View Related
