I am using 11.2.0.1 database on windows 2008 server. I would like to know which are all the tools/components that have licences to use in my database. Can i get licence information through any query?
View 2 RepliesI downloaded the oracle 11g R2 from oracle site. I am using the database for tests in one machine there are 5 months and it works normally (with all features).
My question is, what limitations of this database? What's prevents me to use this db in production environment?
11:53:51 SQL>select * from v$version
11:53:55 2 /
BANNER
--------------------------------------------------------------------------------
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Solaris: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
All, I have an infuriating problem and I'm hoping for some advice. Well actually it is a number of problems but I'll use one example as a microcosm.I'm going to use as the example:
------------------------------------------------------------------------------------------------------
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT | | | | | 912K(100)| |
| 1 | HASH JOIN | | 3412K| 940M| 826M| 912K (1)| 03:02:28 |
| 2 | HASH JOIN | | 3412K| 787M| 699M| 748K (1)| 02:29:39 |
| 3 | HASH JOIN | | 3610K| 657M| 557M| 560K (1)| 01:52:07 |
[code]...
Now then, this query runs perfectly and as expected (direct reads/DB scattered reads) until it hit step 13 in the plan (FTS of T6). At step 13 it basically enters into a (rather fatal) process of reading almost nothing but undo exclusively.
Now then, I wonder why this might be. Of course the natural reaction is to say "they data is changing, its read consistency (optional rookie insult)". Now, I found this hard to believe that the volume of data could be so extensively changed, keeping in mind its a good sized table and it's doing a full access.
I checked the DBA_HIST_SEG_STAT(DB_BLOCK_CHANGES_DELTA) view for the period and in the run up, i.e. the explain plan steps 2-12 took approx 20 minutes. In this window, less than 1% of the blocks in the table T6 were changed (approx 3-4k out of a 500k block table).Nearly every access of this table is reading undo, yet since this query started, 99% of the table is unchanged. But the query is behaving as if everything it reads has altered since it began.
To be clear, I understand the read consistency etc and expect it, what I DONT expect is the virtually the ENTIRE table scan operation routing via undo when I'm accessing the full table, yet hardly any blocks are altered after I start running.
Note this query/application seems to fetch the rows in blocks of 1k, its almost as if its re-executing for each fetch, but I wouldn't have expected that.
In summary:
>Query starts
>hits final table
>almost exclusive undo reads
>under 1% of block changes in read table since query began
Is there any other way anyone knows of that might cause a session to read into undo beyond a session changing data after the query executed?
In our project we have many instance running with Oracle in one solaris zone. We are in the process of cost reduction so planning to bring the CPU in shared pool and reduce them.
if we can bring all the NUP (Named user Perception) CPU on one shared pool. Will it be cost effective and is there any problems in performing such change.
Im planning to install OID. I will use it for Oracle Net name resolution and Enterprise User Security.
How is this product licensed? Is it included in a enterprise rdbms license?
This will be my crontab entry
#!/bin/sh
* * 1 1,4,7,10 * . .profile; /root/bin/SubLicenseCounter.sh QUARTERLY >>/trace/SubLicenseCount.log 2>&1
SubLicenseCounter.sh
sqlplus owner/owner
select count(*) from tb_subscription s, tb_counter cnt where s.tb_destinationaddress is not null and s.tb_ID = cnt.tb_ID and cnt.tb_SENDVALUE>0;
Phyical memory : 420G My database version : 11.2.0.3 running on linux machine.
Memory_target = 200G . I would like to allocate this value to following SGA components. I don't want to automatic memory management enabled. how to split 200G for following components. Is there any percentage for each components ?
db_cache_size
db_recycle_cache_size
db_keep_cache_size
large_pool_size
java_pool_size
shared_pool_size
pga_aggregate_target
streams_pool_size
log_buffer
Using OUI i have removed the Enterprise Manager DBConsole component and now i need to reinstall them. After starting runinstaller i choose Advance and then Custom and i check the Enterprise Manager DBConsole and after i click on next it says cannot install on the same ORACLE_HOME. How can i reinstall the removed components using OUI. This is not Grid Control
View 2 Replies View RelatedIs it possible to create a completely self-contained installer that deploys all the Oracle files along with the application (i.e. the user doesn't need to install instant client, mess around with configuring path environment variables, etc.)?
[URL]
What if as part of the installer, I need to test a connection string entered by the user? That seems to be the sticking point for me. Even after installing the instant client (from the x64 xcopy zip file using install.bat), the installer is not able to connect to the database.
And, the application is 64 bit only (we need the 64 bit Crystal Reports runtime), meaning I've got the 64 bit Oracle instant client installed. I suspect that might be the problem since the msiexec installer process is 32 bit.
in APEX 3 i always had a report showing all linked pages and components...
The Report was located here: Home>Application Builder>Application ID>Application Reports>Page Components>Related Pages and Components I have now updated to APEX 4 and i can't find this report anymore.
I want to connect to oracle in windows server2008-64 bit by Microsoft OLE DB provider for oracle..is 64-bit Oracle Data Access Components (ODAC) possible for oracle9i?
View 3 Replies View RelatedThere is a section that is called Data Loading in Shared components in every application that says: A Data Load Table is an existing table in your schema that has been selected for use in the data loading process, to upload data. Use Data Load Tables to define tables for use in the Data Loading create page wizard. The question is: How ca i select a table in my schema for use in the data loading process to upload data using the wizard? There is a packaged application that is called Sample Data loading. That sample is use for specific tables right? I tried to change those tables for the ones that I want to use but I could not because I could not add the tables that I want to use....
View 4 Replies View RelatedI got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies View RelatedDatabase Version - 10.2.0.4.0
OS - Red Hat Linux
We have configured oracle one way stream between two databases. Source database is capturing the changes (No downstream configured). Configuration was working fine but destination database was lagging behind very much i.e about 15 days behind the source database. We are ok with this but the problem is now that , as per client request we have restored previous backup and open the database with resetlog option in source database. After resetlog , archivelog sequence has been changed and stream is not working.
Can I apply the previous archivelog (before resetlog archivelogs ) in destination database anyway.Source database is a production database.
I tried to clone a 2 node rac database to single instance non rac database using existing backup. I have not used connectivity to target or catalog. rman duplicate finished with below messages:
rman auxiliary sys/******@dbracdup
RMAN> duplicate database to dbrac spfile backup location '/oracle/backup';
...
...
Finished recover at 25-JUL-12
Segmentation fault
And the database was in mount stage, and when i tried to open database it failed with below error:
SQL> alter database open;
alter database open
*
ERROR at line 1:
ORA-19838: Cannot use this control file to open database .
I am trying to retrieve info from multiple DBs and insert into a central DB via DB LINKS.The links are retrieved via a cursor.
However I keep coming up against 'PL/SQL: ORA-00942: table or view does not exist'..how to handle db_links using a cursor in a pl/sql block? The code is as follows:
DECLARE
db_link_rec VARCHAR2(30);
CURSOR db_link_cur IS
SELECT DB_LINK
from MESSAGING_PROD_LIST;
BEGIN
OPEN db_link_cur;
LOOP
FETCH db_link_cur INTO db_link_rec;
EXIT when db_link_cur%NOTFOUND;
[code]....
An SQL query is taking a lot of time than usual and not completing even left after hours! The query joins a table with a quite complex view.
The same query in a test database completes in less than 2 mins.
I would like to export the sql plan from test database to prod database.
how to export/import in 10.2.0.4 version for a particular sql statement's execution plan.
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies View Relatedwe have a production database 'X'. Now i have created a test database 'T' and did'nt configured another listener to it! The issue is when i cam connecting to oracle through sqlplus i am directly connecting to Test database 'T' but not the production database 'X'----ofcourse i can login to production DB afterwards. but initially i want to access the production database 'X'.
View 15 Replies View RelatedI need to refresh a PROD database into TEST database. The PROD and TEST runs on 10g. I need a full refresh. Is there any pre req's which i should keep in mind ?.
View 1 Replies View Relatedcreating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies View RelatedHow one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
View 3 Replies View RelatedI have failed to duplicate target db for standby from active db using spfile with the following errors:
RMAN-03009: failure of backup command on prim1 channel at 08/11/2010 05:25:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
[Code].....
The script has successfully created on standby db all controlfiles and also has copied 2 data files DATA01.DBF and DATA02.DBF into the correct location. Then the errors above kicked in and stopped the rman dup process.
i would like to import a table from another database by using database link.
impdp muba/muba tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
i created the public database link as system user
it gave error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:07:02
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Starting "MUBA"."SYS_IMPORT_TABLE_01": muba/******** tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
[code]....
after that i try to import as system user like
impdp system/passwd tables=FUNCTION_NO schemas=muba directory=testdump NETWORK_LINK=DBLINK1
but error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:27:43
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
UDI-00010: multiple job modes requested, schema and tables.
when i use IMP utility
imp system/passwd file=dump.dmp fromuser=userA touser=userB log=dmplog.log but when i use IMPDP what is the parameter equal to fromuser & touser
i want to convert oracle database(schema data) to postgresql database
which tool would be best and url to download and steps to convert from one database to another ?
Here we have a data guard environment with db1(db_unique_name) as primary and db2(db_unique_name) as physical standby database. Also we configured one schema on a third machine as catalog database using following steps. The steps executed in catalog database(appsdb):
SQL> create tablespace rmancatlog_tbs datafile '/u01/app/oracle/oradata/NEW/rman_catalog.dbf' size 500M autoextend off extent management local segment space management auto;
SQL> create user rman identified by oracle
2 default tablespace rmancatlog_tbs
3 quota unlimited on rmancatlog_tbs
4 ;SQL> GRANT connect, resource, recovery_catalog_owner TO rman;
RMAN> create catalog;
recovery catalog created
Added tns entries of catalog database in primary and standby. Then from primary database we tried to register to catalog database. It is showing that it is registering. But every query afterwards in rman is throwing the error. Below are the steps and error:
[oracle@db1 ~]$ rman target sys/oracle catalog rman/oracle@appsdb
Recovery Manager: Release 10.2.0.3.0 - Production on Mon Aug 13 21:39:32 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: NIOS (DBID=1589015669)
connected to recovery catalog database
[code]....
The documentation for v$database says: QUOTE V$DATABASE displays information about the database from the control file. Is it safe to assume that there will only ever be one row queried from this view?
View 2 Replies View RelatedHow can I copy Team Development from database to another database
View 3 Replies View Related