share what can we do to over come this issue?We are running 11.2.0.2 on IBM Aix. I am trying to do an redef and this is what i see:
Received an ORA-1555 error on a table redefinition with LOB segments.
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number with name "" too small
[code]...
As the ORA-01555 error does have a name we know that this is LOB related.We are using Automatic Undo mode and have RETENTION specifed on the LOB segments in both the source and target tables for the redefinion.The LOB segments in the source table are stored out-of-line (DISABLE STORAGE IN ROW) while the LOB segements in the target table are stored in-line (ENABLE STORAGE in row).There are a very large number of updates occuring on the source table. The table is quite large and the redefintion failed after 36 hours.
In oracle documentation we're finding conflicting information as to whether the UNDO_RETENTION database parameter affects the LOB storage RETENTION parameter, and therefore whether increasing our UNDO_RETENTION will be useful in this issue. The SQL manual indicates that it does affect this saying 'Oracle Database uses the value of the UNDO_RETENTION initialization parameter to determine the amount of committed undo data to retain in the database.'
I performed the Table Redefinition process on one of my transaction tables. I wanted to redefine the existing table to a new table with partitions. Everything worked fine until i reached the last step where we had to drop the interim table. Now in between the redefinition , we created the interim table with partition along with the constraints and indexes and then atlast ran the "dbms_redefinition.finish_redef_table" proc to finish the redefinition.
And after that when I tried to drop the interim table , I am getting the below error message
"ERROR at line 1: ORA-02449: unique/primary keys in table referenced by foreign keys"
So this means all the constraints from my actual table were swapped with the interim table and hence I am getting this error.So is this a normal case or I have missed something while performing the redefinition? If thats normal then should i Just Drop table tablename CASCADE CONSTRAINTS?
I am trying to redefine a table as to get clear of the thousands of chained and migrated rows. The darn table contains a lob column.I am trying to complete the process with the dbms_redefinition package.
I've createad the temporary table with all option to nologging. I've started the redefinition at midnight and it not yet completed and I can't find why it is taking so long. I've done the process with a table, similar in size in a Dev environement and it took at most two hours. In production, the process has been going on for 10h30 now.
I can see my tablespace size increase from time to time and when I querry the dba_segments to find out the size of both tables my temporary table is now 4 times the size of the original table.
User got ORA-01555 error , And My database is runnong with rollback segments ? User got following error ? ORA-01555 'UNABLE TO EXTEND ROLLBACK SEGMENT RBS_O4'
After that I try like this :
prd176> ALTER ROLLBACK SEGMENT RBS_04 STORAGE (MAXEXTENTS 65530); ALTER ROLLBACK SEGMENT RBS_04 STORAGE (MAXEXTENTS 65530) ERROR at line 1: ORA-02221: invalid MAXEXTENTS storage option value
What I have to do? means complete command ?
here I am pasting my db information; prd176> SELECT SEGMENT_NAME,TABLESPACE_NAME,FILE_ID,MAX_EXTENTS,MIN_EXTENTS FROM DBA_ROLLBACK_SEGS 2 3 ;
I have created 3 tables and some indexes, but these objects do not show up in dba_segments view. Is this a normal behaviour? Previously, with dictionary managed tablespace, I can specify the minimum extent to create, when the table/index is created. But I'm not sure how the locally managed tablespace work.
I'm using Oracle 11g R2 (11.2.0.1.0) for Microsoft Windows (x64), running on Windows 7.For the purpose of reproducing this issue, I have created the tablespaces as follow:
CREATE TABLESPACE CUST_DATA DATAFILE 'd:appasusoradataorcl11gr2CUST_DATA01.DBF' SIZE 512K AUTOEXTEND ON NEXT 256K MAXSIZE 2000K EXTENT MANAGEMENT LOCAL UNIFORM SIZE 256K SEGMENT SPACE MANAGEMENT AUTO;
I have an external table. The table gets created successfully. Once the table is created when I try to access it, I get the following error :
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error error opening file /cmpnt/dev/test/ADE_TEMP_4992.log
The default directory is valid and does not have any issues. The IP address of my DB server and the server from which I am connecting to the DB are different. Is this is the issue ? However , all SQL queries are working fine except this one.
SQL> select * from oldemp8; select * from oldemp8 * ERROR at line 1: ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "(": expecting one of: "comma, defaultif, nullif, )" KUP-01007: at line 7 column 16 ORA-06512: at "SYS.ORACLE_LOADER", line 19
SQL>
what is the syntax error in the above command. I place the notepad file properly.i create external table before many time but cant find any this type of error.
I have a scenario where I need to update field in report_input table.It has bind variables in it which will be prompted while running the query.I see that QUERY_VALUE field that need to be updated has length of VARCHAR2(3000).
desc report_input Name Null Type ----------------- -------- -------------- QUERY_NAME NOT NULL VARCHAR2(64) QUERY_VALUE NOT NULL VARCHAR2(3000) [code]....
I am getting compilation error when create nested table type depend on table structure
SQL> CREATE OR REPLACE TYPE typ$nttb$1 IS TABLE OF emp%rowtype 2 ; 3 /
Warning: Type created with compilation errors.
SQL> show error Errors for TYPE TYP$NTTB$1:
LINE/COL ERROR -------- ----------------------------------------------------------------- 0/0 PL/SQL: Compilation unit analysis terminated 1/29 PLS-00329: schema-level type has illegal reference to SCOTT.EMP SQL>
I am trying to upload the data into emp table through sqlloader and facing the following error.
col1 in the data file size is 300.
After reduced the length to 200 and its getting inserted successfully.
EMP ----- COL1 varchar2(300)
Error in Sql log file :-
value used for ROWS parameter changed from 64 to 10 Record 1: Rejected - Error on table "SCOTT"."EMP", column COL_1. Field in data file exceeds maximum length
Version : SQL*Loader: Release 11.2.0.3.0 - Production on Mon Mar 4 15:53:55 2013.
11.2.0.3...just trying to learn the syntax. I have not worked with IOTs and I am exploring a feature I have not really used to try to learn something new. I know about intervals.This exact split syntax below, works on a heap table without errors. When I run the following split against a regular heap table it works.
alter table MYTABLE split partition "FUTURE" at ( to_date('09_MAY_2013_13','DD_MON_YYYY_HH24' ) ) into ( partition "B4_09_MAY_2013_13", partition "FUTURE" ) update global indexes * ERROR at line 1: ORA-00932: inconsistent datatypes: expected BINARY got NUMBER
I am trying to create two tables and I am getting the "ORA-00911: invalid character" Error. I have been trying to work it out for last past 30 minutes to no success.
I am using oracle 10g to create a user register application. what i want is to insert the user information (like Email ,username, password, etc.) into a table. i am able to insert the data into the table but what i want is to check before inserting that same email,and username doesnt exist. if it does it should return some error like the email or username already exist.
want to update 230 records in ins_spr table but its returning error..
Sql statement in blue color returning 230 records.
------------------------------------------------ update ins_spr set SPR_EXCC = 'NORSk' where spr_code = (select distinct spr_code from ins_spr where spr_levc = 'N' and spr_facc = 'ROS' and (sts_code = 'AP' or sts_code = 'LS') and spr_stuc in (select distinct a.sqe_stuc from srs_sqe a where a.SQE_EQEC = 'NP3M' and a.SQE_SQSC = 'BE' and a.sqe_stuc in ( select distinct b.sqe_stuc from srs_sqe b where a.sqe_stuc=b.sqe_stuc and SQE_EQEC = 'NP3S' and SQE_SQSC = 'BE')))
OR
update ins_spr set SPR_EXCC = 'NORSK' where spr_code = (select spr_code from ins_spr where spr_levc = 'N' and spr_facc = 'ROS' and (sts_code = 'AP' or sts_code = 'LS') and exists (select sqe_stuc from srs_sqe a where sqe_stuc = substr(spr_code,1,8) and SQE_EQEC = 'NP3M' and SQE_SQSC = 'BE' and exists ( select sqe_stuc from srs_sqe b where a.sqe_stuc=b.sqe_stuc and SQE_EQEC = 'NP3S' and SQE_SQSC = 'BE')))
I was trying to insert a row into Oracle database consisting 20 columns through IBM Web Experience Factory. I am getting "Array index out of range: 20" error message. To my knowledge insert is working fine till 7 columns. Is it a driver problem or do i need to install any fix pack?
I have created the directory pointing on 'C:data'...And loaded a comma delimited CSV file in there...
- Checked the csv permissions ther are set to 'everyone'
- Checked the previladges of the directory, they are set to 'READ/WRITE'
But when I issue a select statement against the exte table I get an error '
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-04040: file input.csv in DUMP_TXT not found ORA-06512: at "SYS.ORACLE_LOADER", line 14 ORA-06512: at line 1'
I am getting an ORA-00902: invalid datatype error when I am trying call the below function from a select statement. Here I am trying to get a table out from a function.
create or replace package pkg10 as type tabletype1 is table of table1%rowtype index by binary_integer; function func1 return tabletype1; end pkg10;create or replace package body pkg10 as
