I have an external table. The table gets created successfully. Once the table is created when I try to access it, I get the following error :
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
error opening file /cmpnt/dev/test/ADE_TEMP_4992.log
The default directory is valid and does not have any issues. The IP address of my DB server and the server from which I am connecting to the DB are different. Is this is the issue ? However , all SQL queries are working fine except this one.
SQL> select * from oldemp8; select * from oldemp8 * ERROR at line 1: ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "(": expecting one of: "comma, defaultif, nullif, )" KUP-01007: at line 7 column 16 ORA-06512: at "SYS.ORACLE_LOADER", line 19
SQL>
what is the syntax error in the above command. I place the notepad file properly.i create external table before many time but cant find any this type of error.
I have created the directory pointing on 'C:data'...And loaded a comma delimited CSV file in there...
- Checked the csv permissions ther are set to 'everyone'
- Checked the previladges of the directory, they are set to 'READ/WRITE'
But when I issue a select statement against the exte table I get an error '
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-04040: file input.csv in DUMP_TXT not found ORA-06512: at "SYS.ORACLE_LOADER", line 14 ORA-06512: at line 1'
I have got a procedure that successfully creates an oracle external table and populates it with the contents of a file. This works fine until I have a situation where one of the fields is a VARCHAR2(2) and I try to insert say, a 5 character value. When this happens the record in question does not get populated in the external table (and rightly so), but I could do with working out if there is a discrepancy in the number of records in the file and the number of records that actually make it into the table so I could inform the user that there is a problem.
I have attached the code that creates the external table and populates it.
i created the External Table using the script below.
CREATE TABLE EXT_ST_FINANCEIRO_REAL ( DT_DATA NUMBER, TIPO NUMBER, ENTIDADE NUMBER, VALOR Varchar2(40)) [code]....
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "missing" expecting on of: "column, exit,(" KUP-01007: at line 6 column 1 ORA-06512: at "SYS.ORACLE_LOADER", line 19
I tried to use external C procedure from the database and i did all required steps as below. 1. create a C program 2. compile and link the C program 3. copy it to the Oracle_home/bin directory 4. configure listener.ora and tnsnames.ora files
Step 1.Insert all records from the external table into the export table. Truncate the export table first
Step 2.Read in a record from the export map table
Step 3.Search through export table records looking for the key words BRANCH =. Compare the branch code with the branch code form the map table
Step 4.If a match is found mark all records in the export table for the worksheet with the global ID from the export map table as follows..The first line of a worksheet is marked by the words WKSHTS..The last line of the work sheet is marked by the words COMPANY CONFIDENTIAL..We will need to capture the line break so also mark the next line after the COMPANY CONFIDENTIAL line
Step 5.Continue with Steps 2 - 4 until all records have been processed from the export map table.
first I have to create a procedure ti insert data from external table to export table.Global id will be blank.it will be updated by the mapping table's Global Id when The EB COLUMN's data(i.e 8p,2Betc ) will match with the BRANC=NA,2Betc of the datasheet loaded from the external table.. FOLLOWING IS THE SAMPLE DATASHEET
WKSHTS AAAAA BBBBBBBBBBB ELECTRONICS INC. TIME REPORT-DATE PAGE SORT - BR, SLSREP AEC FIELD SALES REPRESENTATIVE 16:14 09/21/12 1 BRANCH = 2B EMPLOYEE NAME SALVAAG, GREGG Days in the Month 28 [code]....
THERE ARE 2 pages..I have to split this LONG REPORT STORED IN WKSHT_LINE COLUMN OF EXPORT TABLE to 2 records..like wise 500 pages are there means 500 records.. AND THEN FIND BRANCH= after that which two words will come i.e NA,2B etc if it will MATCH WITH MAPPING TABLE"S EB COLUMN"S DATA,THEN MAPPING TABLE's GLOBAL ID WILL BE UPDATED TO EXPORT TABLE's GLOBAL ID WHICH IS BLANK
I'm experiencing some problems when trying to import an 50Mb XML file to an Oracle database. In this XML file I do have several data from customers:
- Name - Address - Contacts
I also have several tables within the DB that would receive this information:
- Customer - CustomerAddress - CustomerContacts
The problem is that, with my XML Transformation and correspondent insertion onto the databse I'm having an huge problem of time expended. I'm having more than 3 hours to insert over 180.000 records on those tables. what can I do to accelerate the process?
I need to do some analysis and research to find if any of these 8000 tables I have in a spreadheet that are going to be spit off into a separate database are used by any of our PeopleSoft processes.
I'm assigned to Student Records identified by NTSR.
So for table AAP_ETHNIC_PMPT, I could do something like
SELECT * FROM PSSQLTEXTDEFN where SQLID like 'NTSR%' AND upper(sqltext) like '%PS_AAP_ETHNIC_PMPT%';
But how can I automate this and search 8000 rows in column A2 of a spreadsheet? What other tables other than PSSQLTEXTDEFN or PSPROJECTITEM can I use to search for values of NTSR?
when i am writing dump from external table, it is accessing records from dump.but when i am trying to access other dumps(create thru expdp) it is giving error.the logic i am following is mentioned below-
CREATE OR REPLACE DIRECTORY "DIR_GMS" AS 'D:Gopal_works est_env_files'
GRANT READ ON DIRECTORY dir_gms TO gopal; GRANT WRITE ON DIRECTORY dir_gms TO gopal;
New point: -- taking export thru expdb expdp hr/hr tables=EMPLOYEES directory=DIR_GMS dumpfile=HR_EMP.dmp logfile=expdpEMP.log then i created one EXTERNAL TABLE TO access it.
function isnumeric( p_string in varchar2) return boolean as l_number number; begin l_number := p_string; return TRUE; exception when others then return FALSE; end;
It is not recognizing function IS NUMERIC. Is there any way, I can do this through External Table.
I'm getting error like
The following error has occurred:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "identifier": expecting one of: "comma, date_format, defaultif, enclosed, (, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ), rtrim, terminated" KUP-01008: the bad identifier was: isnumeric KUP-01007: at line 9 column 16 ORA-06512: at "SYS.ORACLE_LOADER", line 14 ORA-06512: at line 1
i had small query on external tables. i had (.csv) file outside the database. In this file, one column will be added monthly. i need to create the external table dynamically by adding the column for every month.
How the procedure can be created for this requirement.
then it gets " select * from ext_schoolof " BUT when i use procedure, it creates external table but when I try to get " select * from ext_schoolof ", then I get errors
While creating external table how can I specify a particular decode condition for a date field that comes in as '2099-99-99' i want to change it to '2099-01-0001', how i can translate it
I already have this in the access parameters..
Incoming_DATE CHAR(20) DATE_FORMAT DATE MASK "YYYY/MM/DD"
I am importing some data using an external table, but the file on which the external table is built has some rows where a certain column is populated with two empty space characters.
CREATE OR REPLACE DIRECTORY xtern_data_dir AS 'C:/...';
This is an except of what's in the external text file. The full text file has been attached.
000011|0030|....|000000.000000| |000000.000000| |0002 000011|0365|....|000000.000000| |000000.000000| |0002 000011|0730|....|000000.000000| |000000.000000| |0002 ^ blank spaces may be | causing error----------
Here is the error message I am receiving. I believe this is caused by the blank fields in the data.
INSERT INTO RPDMMA1_PEDI_MSTR (GCN_SEQNO,.... * ERROR at line 1: ORA-29913: error in executing ODCIEXTTABLEFETCH callout ORA-30653: reject limit reached ORA-06512: at "SYS.ORACLE_LOADER", line 52
This is difficult to work with because the external table function does not appear to be even reading the file so it's not like I can convert the data as I'm loading into the internal database table. What are some approaches I can use to get Oracle to accept these blank columns and either populate them with blank spaces or set them to null?
CREATE TABLE EXT1 ( COL1 NVARCHAR2(2000), COL2 CLOB ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY FILE_DIR ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE FIELDS TERMINATED BY '|' MISSING FIELD VALUES ARE NULL ( "COL1" CHAR, [code]....
From here I can count all records and the total number of records matching the file record count, but could not read the clob columns. it's not picking up the values. but if I take this out
( "COL1" CHAR, "COL2" RAW )
then I am missing the record counts.Also if you put all varchar and char, that also missing the count against the file.
I am having difficulty importing Spanish text files into my Oracle 11g XE database. Below is my external table declaration code. The external file is attached.
CREATE OR REPLACE DIRECTORY xtern_data_dir AS 'C:/.../';
All 406 rows seem to import fine, but do not display the Spanish accent characters correctly. Note the strange characters:
SQL> SELECT count(*) FROM ET_SLBLWD0_SPNSH_DESC;
COUNT(*) ---------- 406
SQL> select * from et_slblwd0_spnsh_desc;
LBL_ LBL_TXTSNS LBL_DESCS L L L L ---- ---------- ------------------------------------------------------- - - - - 0001 1 Puede causar somnolencia. El alcohol puede intensificar 0001 2 este efecto. Tenga cuidado cuando conduzca veh¿los 0001 3 automotores u opere maquinaria peligrosa. 0002 1 Importante: Acabe todo este medicamento a menos que 0002 2 quien le escriba la receta le indique lo contrario.
[Code]...
I tried modifying my external table declaration by adding CHARACTERSET WE8ISO8859P1 and CHARACTERSET WE8MSWIN1252, but that just seems to cause the system to throw out ALL the rows containing Spanish characters:
COUNT(*) ---------- 197
SQL> select * from et_slblwd0_spnsh_desc;
LBL_ LBL_TXTSNS LBL_DESCS L L L L ---- ---------- ------------------------------------------------------- - - - - 0001 1 Puede causar somnolencia. El alcohol puede intensificar 0001 3 automotores u opere maquinaria peligrosa. 0002 1 Importante: Acabe todo este medicamento a menos que 0002 2 quien le escriba la receta le indique lo contrario. 0005 1 Debe tomar este medicamento con mucha agua. 0006 1 Puede descolorar la orina o las heces.
[Code]...
The log file specifies the following error on the bad rows:
error processing column LBL_DESCS in row xxx for datafile ...SLBLWD0_CRLF.TXT ORA-12899: value too large for column LBL_DESCS (actual: 55, maximum: 55)
What can I do to import these Spanish characters correctly?
i'm having some issues with the External table. Currently my database encoding is AL32UTF8. If my external table wants to read the txt file with the ZHS16GBK, the value will not show correctly when the external table reads the file. Is there any ways to display the value in the txt file correctly without changing the encoding database and encoding in the txt file.
My db version: Oracle 11g I have an empty csv file.I created a external table for the empty csv file.When I run:select count(*) from externaltblname;It returns 1. It should return 0 right. In the definition, I specified "SKIP 1"But still it returns 1. When I use this external table to load into a target table. It loads a single row with null values.How to fix this.
getting proper value from the file in external table.
How can I get the whole status in STATUS column like completed , Inprogress, incompleted. Right now, if I gave position like (38:9) full status doesn't show. if I give (38:11) then '|1' is adding in status from the flat file.
BATCH_NO FILE_DATEEMP_ID COMPANY_ID TRANSACTIN_ID FILE_NAME STATUS DOC_NO 10000104252012100001***4252012**1:35:57***D100001***04252012***10:35:57***Diverified
ERROR at line 1: ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "badfile": expecting one of: "column, enclosed,
I have an oracle code that is using Oracle External table to load a file.The issue: the column within the files have NA within them which needs to be skipped. Mentioned the code below -
I have a flat file on an unix system.The file is required to be loaded through Oracle External Table.
Issue: Not sure how to skip the first record when loading through Oracle External Table.How to suppress data while loading through External Table.
Requiremen syntax where in I can skip the first record. syntax for suppressing values in columns that are not required. How the same needs to be handled in case of Number datatype and Varchar2 datatype. Example - In case of Number can it be replaced with 0 and for datatype can be same be replaced with NULL.
im trying to create an external table, and i load my data without no problem, and everything is fine, but i got some behavior with one column that i would like to know whats behind scenes, OK let's get the example:
[*] Sample Data Line 1:333 1111111112009100000000000080000000013450.33 Line 2:11111111111220091016000000004.48 Line 3:222222222 220091016000000004.48 Line 4:(This is a blank line left)
As you can see i can upload my table with no problem but i always get 3 lines counting last blank line if i try LOAD WHEN COL_A != BLANKS, i dont know if its a problem of the blank space left between fixed fields length, but if i do LOAD WHEN COL_B != BLANKS i get correct result 2 lines instead of 3, i want to know why (missing fields...) and (reject rows...) are not working...
Note: COL_A could be 9-11 length, if length its 9 then 2 spaces left before next one...
I am trying to load my table using a external table. I have data in .DAT file and I have created a directory and its path and everything is complied and created properly. But problem is, when I say "insert into my table select from external table". It's inserting all null values into my table. Instead of inserting data from my .DAT file its inserting all null values,
