Server Utilities :: How To Get Proper Value In External Table
May 3, 2012
getting proper value from the file in external table.
How can I get the whole status in STATUS column like completed , Inprogress, incompleted.
Right now, if I gave position like (38:9) full status doesn't show. if I give (38:11) then '|1' is adding in status from the flat file.
BATCH_NO FILE_DATEEMP_ID COMPANY_ID TRANSACTIN_ID FILE_NAME STATUS DOC_NO
10000104252012100001***4252012**1:35:57***D100001***04252012***10:35:57***Diverified
im trying to create an external table, and i load my data without no problem, and everything is fine, but i got some behavior with one column that i would like to know whats behind scenes, OK let's get the example:
[*] Sample Data Line 1:333 1111111112009100000000000080000000013450.33 Line 2:11111111111220091016000000004.48 Line 3:222222222 220091016000000004.48 Line 4:(This is a blank line left)
As you can see i can upload my table with no problem but i always get 3 lines counting last blank line if i try LOAD WHEN COL_A != BLANKS, i dont know if its a problem of the blank space left between fixed fields length, but if i do LOAD WHEN COL_B != BLANKS i get correct result 2 lines instead of 3, i want to know why (missing fields...) and (reject rows...) are not working...
Note: COL_A could be 9-11 length, if length its 9 then 2 spaces left before next one...
I have to have a sequence added to a large(288 million rows) file when I load the file into the table. If I use SQL Loader I can't use direct since I have a trigger for each row for the sequence but I am not sure if an external table will be any faster since the trigger will be firing for each row also. In this scenario is one better than the other ?
i created the External Table using the script below.
CREATE TABLE EXT_ST_FINANCEIRO_REAL ( DT_DATA NUMBER, TIPO NUMBER, ENTIDADE NUMBER, VALOR Varchar2(40)) [code]....
ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error KUP-00554: error encountered while parsing access parameters KUP-01005: syntax error: found "missing" expecting on of: "column, exit,(" KUP-01007: at line 6 column 1 ORA-06512: at "SYS.ORACLE_LOADER", line 19
i load data to this table from a file using sqlldr.
what is the proper data type should i use in control-file for both the fields.? i dont mention any datatye in ctl file which is working fine with given dataset.
I just did a 112G file migration of production data using oracle_datapump so I know this works in principle. When I tried it on my test instance I am seeing stuff like this
why it could be taking 1800 seconds to select one record from a not very big table? File corruption? Disc fragmentation? Oracle instance configuration?
i just posted another topic where i heard about external table and i had a few questions concerning them. I thought it was best to create a new topic than to continue on the other one...
I noticed that to create an external table the CTL is like this: CREATE TABLE emp_load (FIELDS description) ORGANIZATION EXTERNAL (TYPE ORACLE_LOADER DEFAULT DIRECTORY ext_tab_dir ACCESS PARAMETERS (RECORDS FIXED 62 FIELDS (employee_number CHAR(2),
[Code]...
1) This creates an external table, but, is it possible to Create a normal table in a CTL file? For physical tables, the table has to exist right?
2) if you create a view linked to 2 external tables and if the CSV files are updated each day, the external tables will be updated automatically, and the view will be updated as well?
3) Can't there be any synchronisation problems?
4) What happens if a select request (or someone requests on the view) while the CSV file is being updated?
5) Is there anyway you can protect the accesses from those tables/views when the CSVs are being updated?
6) Is it possible to create an index on these sort of tables?
7) Is it possible to index a view?
8) Are external tables visible on a tool like sql developper?
While i like to start CSS service to create new ASM instance in my own pc for testing purpose gettting the below errors "'localconfig' is not recognized as an internal or external command, operable program or batch file.".
I have got a procedure that successfully creates an oracle external table and populates it with the contents of a file. This works fine until I have a situation where one of the fields is a VARCHAR2(2) and I try to insert say, a 5 character value. When this happens the record in question does not get populated in the external table (and rightly so), but I could do with working out if there is a discrepancy in the number of records in the file and the number of records that actually make it into the table so I could inform the user that there is a problem.
I have attached the code that creates the external table and populates it.
I am trying to build a report.My query is working fine when i take out this report for a single area_code.But it is not showing proper result when report is take for all are_code's available in table.I have used two tables transactions and balance
create table transactions ( glcode varchar2(10), area_code varchar2(10), debit number,credit number ); insert into transactions values(2000,'ap',200,200); insert into transactions values(3000,'ap',222,222); insert into transactions values(4000,'ap',123,123); insert into transactions values(2000,'dp',200,200); insert into transactions values(3000,'dp',222,222); insert into transactions values(4000,'dp',123,123); insert into transactions values(2000,'pp',200,200); insert into transactions values(3000,'pp',222,222); insert into transactions values(4000,'pp',123,123); [code]....
I have a requirement to import text files which are generated from 3d modelling software xsteel where it records all geometric information and i want to import this information into oracle table.
I want to do an import of a table from my old dump file.The same table is already there in the development box but few more columns are added to that table while testing so in the dump those columns are not available.
TABLE_EXISTS_ACTION=TRUNCATE The new table SQL> desc "TESTINVENTORY"."TTRANSACTION" Name Null? Type ----------------------------------------------------------------------------------- -------- -------------------------------------------------------- TRANSACTIONIDNOT NULL CHAR(26) BRANCHCODE NOT NULL CHAR(3) EXTERNALSYSTEM NOT NULL CHAR(3) EXTRACTSYSTEM NOT NULL CHAR(3) OWNERBRANCHCODE NOT NULL CHAR(3) TRADEREFERENCE NOT NULL CHAR(20) [code]...
Step 1.Insert all records from the external table into the export table. Truncate the export table first
Step 2.Read in a record from the export map table
Step 3.Search through export table records looking for the key words BRANCH =. Compare the branch code with the branch code form the map table
Step 4.If a match is found mark all records in the export table for the worksheet with the global ID from the export map table as follows..The first line of a worksheet is marked by the words WKSHTS..The last line of the work sheet is marked by the words COMPANY CONFIDENTIAL..We will need to capture the line break so also mark the next line after the COMPANY CONFIDENTIAL line
Step 5.Continue with Steps 2 - 4 until all records have been processed from the export map table.
first I have to create a procedure ti insert data from external table to export table.Global id will be blank.it will be updated by the mapping table's Global Id when The EB COLUMN's data(i.e 8p,2Betc ) will match with the BRANC=NA,2Betc of the datasheet loaded from the external table.. FOLLOWING IS THE SAMPLE DATASHEET
WKSHTS AAAAA BBBBBBBBBBB ELECTRONICS INC. TIME REPORT-DATE PAGE SORT - BR, SLSREP AEC FIELD SALES REPRESENTATIVE 16:14 09/21/12 1 BRANCH = 2B EMPLOYEE NAME SALVAAG, GREGG Days in the Month 28 [code]....
THERE ARE 2 pages..I have to split this LONG REPORT STORED IN WKSHT_LINE COLUMN OF EXPORT TABLE to 2 records..like wise 500 pages are there means 500 records.. AND THEN FIND BRANCH= after that which two words will come i.e NA,2B etc if it will MATCH WITH MAPPING TABLE"S EB COLUMN"S DATA,THEN MAPPING TABLE's GLOBAL ID WILL BE UPDATED TO EXPORT TABLE's GLOBAL ID WHICH IS BLANK
We have a table in Oracle9i database with around 14 million records and we would like to import that table into 10g database with similar structure. We have exported the table from 9i database and would like to import the table into 10g database within same schema name with different table name as we already have the table with same name in 10g database in same schema. Is it possible to import a table with different table name?
We have a way around to import the table into 10g database in another schema and then push the data into our main table but want to know whether the above requirement is possible.
I am getting the below error when I import a table from Prod to Dev. I understand this error will be occured if length of the datatype is low. First I got the error when the datatype(length) which is 25 for the column PASSWORD column.Then I increased the length of this column to 45, then it was imported successfully.
why am facing the error when the datatye and length for this table is same in prod and dev? What are the possible ways to import the data without increasing the PASSWORD column length?
IMP-00019: row rejected due to ORACLE error 12899 IMP-00003: ORACLE error 12899 encountered ORA-12899: value too large for column "ANEES"."SALSA_WEB_ACCESS"."PASSWORD" (actual: 28, maximum: 25) [code]....
from Control file, data is getting popupalated in TEST_USER and TEST_TITLE similarly if remove
INTO TABLE TEST_TITLE( TX_SID POSITION(1:3) CHAR, ID_TITLE "get_title_id(:TITLE_NAME)" ,
[code]...
from Control file, TEST_USER and TEST_ROLE is getting populated.
Here RD_ROLE_MASTER script
CREATE TABLE RD_ROLE_MASTER ( "ID_ROLE" NUMBER(38,0) NOT NULL ENABLE, "TX_ROLE_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE
[code]...
Here is RD_TITLE_MASTER script CREATE TABLE RD_TITLE_MASTER( "ID_TITLE" NUMBER(38,0) NOT NULL ENABLE, "TX_TITLE_NAME" VARCHAR2(25 BYTE) NOT NULL ENABLE);
Insert into RD_TITLE_MASTER (ID_TITLE,TX_TITLE_NAME) values (7,'RED_LOB_ESCALATION_L1'); what is the problem?
I Have one csv file.i want to load to a table trough sql*loader.but in table 3 column is there.but in the csv file some record hav one semicolumn in last filed like this
I wanted to export a table "emp_production" from Production database then import it as "emp_datawarehouse" in Data warehouse database.Both tables has same structure. I have granted IMPORT FULL DATABASE & EXPORT FULL DATABASE privileges to both schema
I have a file having 10k of rows and I need to use *sql loader to insert the data into table. Below are the information.
SQL> desc EMPLOYEE Name Type EMP_ID NUMBER(10) -- PrimaryKey EMP_NAME VARCHAR2(30) DEPT_ID NUMBER(10) -- ForeignKey from DEPARTMENT
SQL> desc DEPARTMENT Name Type DEPT_ID NUMBER(10) DEPT_NAME VARCHAR2(30)
myFile.txt ------------ 1,Edward,Account 2,Andrew,Finance 3,Sam, IT
CONTROL FILE (SQLLOADER) ------------ load data infile myFile.txt append into table EMPLOYEE FIELDS TERMINATED BY ',' (EMP_ID, EMP_NAME, DEPT_ID ) <--- ?? What should do in here
what should i do in this line because the value that i want is DEPT_ID but the file is giving the DEPART_NAME. If there any sql statement can be used in control file?
I am exporting a table that is 3 GB in size and also Partitioned with option NOCOMPRESS specified.
Now when i export it with COMPRESS=N option of exp utility then it should take 3 Gb in target server but will exporting it with COMPRESS=Y will save some storage during import or once NOCOMPRESS option specified on partition has no impact on exp utility COMPRESS=Y option and it will take 3 GB space in both cases
Is this true that whether u specify COMPRESS=N|Y during export it does not matter the size will be 3 GB always after import?
