Create A Procedure To Update Status?
Mar 10, 2011create a procedure that will update the column status from active to closed after every two years.
View 4 Replies
ADVERTISEMENT
Create A Procedure To Update The Table?
Aug 27, 2007I got a table table1 with 3 columns: id, name, value
im trying to create a procedure to update the table.
create or replace
PROCEDURE TEST1 (
x IN varchar,
y IN varchar,
z IN varchar
) AS
BEGIN
update table1 set value=x where name=y and id=z;
commit;
END TEST1;
that doesnt seem to work
SQL & PL/SQL :: Create Stored Procedure To Update Columns In Table
Dec 8, 2010I have three tables fixtures, fixture_teams and team_tbl
fixtures consists of:
create table Fixture_tbl(
fixt_id varchar2(8),
fixt_date date,
fixt_time varchar2(10),
fixt_location location_t,
umpire_id varchar2(8),
player_of_match player_of_match,
home_team varchar2(20),
away_team varchar2(20),
[code]....
creating a stored procedure that updates the points column in the teams_tbl , the value that is updated in to the points column will be retrieved from the fixture_team table. so if team a has more goals than team b then the points column for team a will be increased by 6 else if the scores are equal they get 4 points each.
Ora-06502 - Create Generate Procedure That Create Dynamic Procedure Through DBMS_SQL
Mar 31, 2004ORA-06502...I have database on oracle 9i on Solaris 9. I create a generate procedure that create dynamic procedure through DBMS_SQL. On this database I got the ORA-06502 error. When I tried to run the same procedure on the same database on oracle 8i on NT this work fine.
View 3 Replies View RelatedSQL & PL/SQL :: Monitoring Status Of Procedure?
Feb 24, 2010I've got a pl/sql procedure that i would like to monitor its progress. Its been running for quite a few hours now and i dont really know if it is stuck in a loop or if it is just taking too long read/execute queries. Is there a way to find out what is the status of the procedure? or what it is currently doing?
I looked at views like v$sessions or v$session_longops but they dont actually tell me what it is currently doing. All of them just point to the call to the pl/sql procedure. Also, is it possible to look at the physical files on the filesystem to know if there is actually any processing going on and files are being written to? Is this possible or a files written to only after a commit?
SQL & PL/SQL :: Create Trigger That Will Update Table When There Is Insert / Update
May 29, 2012i want to create a trigger that will update a table when there is an insert or update.i can't across this error that i don't even know what it means "table %s.%s is mutating, trigger/function may not see it".
*Cause: A trigger (or a user defined plsql function that is referenced in this statement) attempted to look at (or modify) a table that was in the middle of being modified by the statement which fired it.
*Action: Rewrite the trigger (or function) so it does not read that table.
CREATE OR REPLACE TRIGGER set_date_end
BEFORE INSERT OR UPDATE OF issued ON shares_amount
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO shares_amount(date_end) VALUES(SYSDATE);
END set_date_end;
/
Create Procedure To Create User In Oracle
Jan 19, 2012I need to create PROCEDURE to create user in oracle
CREATE OR REPLACE PROCEDURE "CREATE_USER_ORACLE8"
(
USER_ID in VARCHAR2,
PASSWORD in VARCHAR2,
ROLES in VARCHAR2,
nReturnCode OUT NUMBER
)
BEGIN
[code].......
Compilation errors for PROCEDURE NOG.CREATE_USER_ORACLE8
Error: PLS-00103: Encountered the symbol "BEGIN" when expecting one of the following:
; is with authid deterministic parallel_enable as
Line: 9
Text: BEGIN
i want that the customer execute PROCEDURE (user_id,password,PROCEDURE )
PL/SQL :: Create A Procedure Inside A Procedure
Jun 25, 2012DB version:11g
can we create a procedure inside a procedure...if not is there any alternative??
in db2 it is allowed so do oracle support this????
SQL & PL/SQL :: Can A Procedure Be Used In Update Statement
Aug 2, 2011PROCEDURE split_name (
full_name IN VARCHAR2,
name1 OUT VARCHAR2,
name2 OUT VARCHAR2,
name3 OUT VARCHAR2,
name4 OUT VARCHAR2,
name5 OUT VARCHAR2
)
the above is the procedure declaration. i want to use this function in updating the records in a table. this procedure is working fine in forms and it is splitting the names perfectly and i dont know how to use this in update statement as it is not returning anything like functions do.
SQL & PL/SQL :: Procedure For Update / Insertion?
Jan 5, 2012In procedure "update_emp", i am updating a row based on p_empno and if it is not present i.e. SQL%ROWCOUNT = 0, then I am inserting that row into emp table.
where as in procedure "update_emp1" , first I am checking whether any row with that p_empno is present or not,if presentthen update the row, else raise an exception to insert the row.
In both procedure, I am doing the same thing, But I am unable to understand which one is good and why
create or replace procedure update_emp( p_empno int) is
begin
update emp set ename='raj' where empno=p_empno;
[code]....
Store Procedure Insert / Update?
Dec 7, 2011Store procedure code, I want to insert data in a database in this fashion,I want to check first if the record exist, if not Insert or else Update.
View 2 Replies View RelatedSQL & PL/SQL :: Procedure Has Got Several Update And Delete Statements
Oct 23, 2013One of the procedures that am working on is failing with ORA-0000: normal, successful completion error.
The procedure has got several update and delete statements and have logging enabled after each step. The problem with that again is, each time the log table gets updated thereby losing the history of until what point the procedure ran successfully.I have this issue only in production environment and unable to simulate it in dev environment which limits my options of troubleshooting the procedure code. I was using SQLERRM in the code.
Is there a way I can identify the bad records/ record causing this issue? Am very new to PL/SQL and do not know how to proceed with this.How do you debug this sort of issues??(where one procedure internally invokes another one which again invokes other one etc)
SQL & PL/SQL :: Stored Procedure For Insert And Update?
May 27, 2011i Have Write A SP But Show me Error when i Compile It.
Create or Replace Procedure PREPAIDEXPENSE(v_OperationType varchar2(1))
v_ATTM_TXN_TYPES_CODE ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_CODE%TYPE;
v_ATTM_TXN_TYPES_DESC ACC_TXN_TYPES_MST.ATTM_TXN_TYPES_DESC%TYPE;
v_ATTM_STATUS ACC_TXN_TYPES_MST.ATTM_STATUS%TYPE;
v_ATSM_STAGE_ID ACC_TXN_TYPES_MST.ATSM_STAGE_ID%TYPE;
v_PP_ACCOUNT_GL ACC_TXN_TYPES_MST.PP_ACCOUNT_GL%TYPE;
[code]....
Error:SQL command not properly ended
PL/SQL :: Procedure To Update Duplicate Rows?
Mar 14, 2013In a table i have some duplicate rows
I can get it through this query : select PARTY_ID from XXWFS_CUSTOMER_EXT group by PARTY_ID having count (PARTY_ID) > 1;
Now for the records which i got for each duplicate row i want to update the second row with a specific value.. so that duplicate rows does not exist anymore
Ex: I got party id's 12, 14, 16, 18 two times each
Now as 12 is two times.. i want to update the second row of 12 with some x value same is the case for other values like 14,16, etc
how can i write a procedure for this
SQL & PL/SQL :: Create Trigger To Update Table B After Update On Table A
Jul 21, 2011I have table test1(id,name) and table test2(id,,name)
Now when I update name column of a row on test1 I want the same value to be updated for the same id in test2.
So I wrote this trigger but its not working
create trigger test_trigger after update on test1 for each row
begin
update test2 set name=new.name where test2.id=id
end
/
Update Store Procedure (List Of Input)
Jan 10, 2012The current update store procedure that I have updates a list of input provided, but it there are fields that are left blank, they are being updated as null in the database.
I'm having a trouble creating a store procedure that will just update the provided fields only.
SQL & PL/SQL :: Procedure To Update Double Subcategory Sequence
Dec 6, 2010I need to write a procedure to be able to reuse it to clean up subcategory sequence. Here is a problem: two tables: Category and subcategory:
create table Category
(category_id number,
Name varchar2(20))
/
create table Sub_Category
(sub_category_id number,
category_id number,
sequence number)
/
In the ideal world each subcategory of a single category would have unique sequence so if there are 3 subcategory for the same category then each of them would have 1,2,3 in sequence, if there are 5 subcategories then 1,2,3,4,5 for each of them etc.
Problem I'm facing is that some of the subcategories sequences for the same category has the same values . For instance for 4 subcategories of the same category, each of them has 1 (1,1,1,1) in a sequence.
So ideal world is :
Insert into Category values (123 ,'Category1');
Insert into Category values (234 ,'Category2');
Insert into Category values (345 ,'Category3');
Insert into Category values (456 ,'Category4');
Insert into Category values (567 ,'Category5');
Insert into Sub_Category values (1,123,1);
Insert into Sub_Category values (2,123,2);
Insert into Sub_Category values (3,123,3);
But I've also bad rows like this:
Insert into Sub_Category values (4,234,1);
Insert into Sub_Category values (5,234,1);
Insert into Sub_Category values (6,234,1);
Insert into Sub_Category values (7,345,1);
Insert into Sub_Category values (8,345,1);
[code].....
Fix for this and my goal is to select all such cases where subcases have mixed up sequences as above and give them randomly numbers starting from 1. So if there are 3 subcategories like for CATEGORY 2 then just apply random number to the sequence of the subCATEGORIES like 1,2,3. For CATEGORY 3 : 1,2,3 to 7.
I was thinking to write two procedures one selecting all the categories and passing category ID to the other procedure that would actually update sequence, like this:
CREATE OR REPLACE PROCEDURE SCHEMA.SELECT_CATEGORY
IS
CURSOR c1
IS
select category_ID from category where ...;
BEGIN
FOR a IN c1 LOOP
UPDATE_SUBCATEGORY(a.Category_id);
COMMIT;
END LOOP;
END;
/
And the actual procedure updating subcategory:
CREATE OR REPLACE PROCEDURE SCHEMA.UPDATE_SUBCATEGORY
BEGIN
............
END;
/
write PROCEDURE SCHEMA.SELECT_CATEGORY cursor to not miss any of the categories ID having mixed up subcategory. There can be any of the doubled sequences like doubled 1 value (this is majority) but there can be any other doubles (or at least I need to make sure that there aren't any other doubles 2 values or 3 values in sequence etc.)
And how to write SCHEMA.UPDATE_SUBCATEGORY to loop through rows of subcategory and update sequence with values starting from 1 ?
SQL & PL/SQL :: How To Grab The Update Values And Insert Into Procedure
Jun 8, 2011how can i make this script into a function or procedure which instead of user change the crime_id :=4 or 5 directly it actually can grab the id from a update statment like
UPDATE CRIME_STATUS SET CRIME_STATUS = 'open'
WHERE CRIME_ID = 9;
pick 9 and insert into the above statment so it runs as normal
[Code].....
SQL & PL/SQL :: Update Stock Procedure And Debit Credit?
Dec 21, 2010i want to ask to all that, i have three table
(1)stock (2)issuance(3)recieve
i want to create as procedure when i issue in issuance table then update + stock in stock table. and when i recieve in recieve table then minus- stock in stock table.
hows can i create these procedure
i m using in oracle 9i and form 6i.
PL/SQL :: How To Update Multiple Records Using Stored Procedure
Feb 27, 2013I want to update records which returns more than 1 row using store procedure. i tried with ref_cursor but failed to update,
View 1 Replies View RelatedPL/SQL :: Update Multiple Records Using Store Procedure?
Feb 27, 2013i am trying to update multiple records using store procedure but failed to achieve
for example my source is
emp_name sal
abhi 2000
arti 1500
priya 1700
i want to increase salary of emp whose salary is less than 2000 it means rest two salary should get update..using stored procedure only
i have tried following code
create or replace procedure upt_sal(p_sal out emp.sal%type, p_cursor out sys_refcursor)
is
begin
open p_cursor for
select sal into p_sal from emp;
if sal<2000 then
update emp set sal= sal+200;
end i;f
end;
and i have called the procedure using following codes
set serveroutput on
declare
p_sal emp.sal%type;
v_cursor sys_refcursor;
begin
upt_sal(p_sal,v_cursor);
fetch v_cursor into p_sal;
dbms_output.put_line(p_sal);
end;
the program is executing but i should get o/p like this after updating
1700
1900
but i am getting first row only
2000
and record is not updating...
SQL & PL/SQL :: Table Update - Unable To Identify Procedure
Feb 21, 2011We have one table which is updated by some program but we are not able to identify the procedure, package or script which update it.
View 2 Replies View RelatedSQL & PL/SQL :: Create Trigger On Table After Update?
Apr 16, 2013i have created a trigger on a table after update. i am using if condition if the condition is true i am passing a value and then inserting into audit table.
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
if(condtion)
L_change_type='value'
end if;
Then i am inserting
Insert into audit_table(change_type.....)
values(..L_change_type)...)
If i want to skip the insert statement for particular condition wt i have to do.
SQL & PL/SQL :: Procedure To Update Or Insert Data In Multiple Tables
Apr 9, 2011I'm writing a Procedure which Updates or Inserts data in Multiple tables. Selected fields of 10 tables need to be updated or Inserted. For this I created a table which comprises of fields related to all 10 tables. Then I write Procedure. Under this I create a Cursor which uploads the data from the newly created table which contains different fields of 10 tables. Then I write Update and Insert statements one by one for all 10 tables.
Sample Procedure below.
-------------------------------------------
Create or replace procedure p_proc as
spidm spriden.spriden_pidm%type;
cursor mycur is select * from mytable;
begin
for rec in mycur
[code]......
----------
Note: I created table on my server because data is coming from different server. They will upload the data in the table from there I pick and update the tables. Is updating or Inserting data in different tables one by one is correct?
Create A Trigger Before Update On Table Test1?
Dec 25, 2010i have two table:
QUOTE create table test1(
num number(4),
name varchar2(50));
create table test2(
num1 number(4),
name1 varchar2(50));
then i want to create a trigger before update on table test1 that i want to insert in table test2 the old values in table test1:
for example
QUOTE insert into test1(1,'cocol');
QUOTE update test1
set name='oracle' where num=1;
so i want the trigger to insert 1 and cocol into the table test2.
PL/SQL :: Reverse Update - Create Synonym In Different Schema
Aug 8, 2012I have table a in database 1 . Now i have created the MV for table a in database 2.
then i am going to create a synonym in different schema in the database 2.
Now i want to update the synonym in database 2 the same as to refresh in table a database 1.
How to achieve this??
SQL & PL/SQL :: Create Update Trigger That Allows Any Quantity Reduction Of 5 Units
Oct 27, 2011i am trying to create a update trigger that allows any quantity reduction of 5 units and if the reduction is more than 5 units it blocks it and just reduces it by 5.here are two scenarios
SQL Update statement where the new Quantity value being smaller than 5 is allowed by the trigger.
-- old qty 20
update purchase_order
set quantity = 18
where po_no = 'PO11';
-- new qty 18
SQL Update statement where the new Quantity value being larger than 5 is only reduced by 5 by the trigger.
--old qty 25
update purchase_order
set quantity = 19
where po_no = 'PO15';
-- new qty 20
i just have the basic trigger code, but i think it is the math that i am not getting (i was never good at math)
create or replace trigger purchase_quantity_updt
before update of quantity on purchase_order
for each row
when (new.quantity < old.quantity )
begin
-- not sure what to put here
end;
SQL & PL/SQL :: Create DBMS-SQL Procedure?
Oct 7, 2010I am creating the following dbms_sql procedure...
CREATE or replace PROCEDURE table_demo
(tabname IN varchar2)
IS
cursor_name INTEGER;
rows_processed INTEGER;
[code]...
There are no compilation errors.I call this code from the following anonymous block...
DECLARE
X CHAR:='T';
BEGIN
TABLE_DEMO(X);
END;
This also compiles successfully and without any errors. It runs properly as wellHowever when I run 'select * from T'. Then system throws up the error of table or view does not exist.
SQL & PL/SQL :: Create A Trigger And Procedure To Go Along With DDL
May 11, 2010I'm trying to create a trigger and procedure to go along with my DDL. Everything is created just fine, but when I try to execute an update on the table monitored by the trigger I get the following error:
update housing set group_num = 1 where room_num = 10
ERROR at line 1:
ORA-00937: not a single-group group function
ORA-06512: at "YANKEEFAN146.VIOLATION_CHK", line 6
ORA-04088: error during execution of trigger 'YANKEEFAN146.VIOLATION_CHK'
/* DDL */
create table violation_type
(violation_num number(1) primary key,
violation_def varchar2(100) not null)
organization index
tablespace mi257_data;
[code]....
SQL & PL/SQL :: Create A Procedure Using EXECUTE IMMEDIATE?
Apr 14, 2013I am trying to create a procedure using the EXECUTE IMMEDIATE. I have been having problems calling it from an anonymous block
My code
CREATE OR REPLACE PROCEDURE homework
(p_table_name VARCHAR2)
IS
v_department_id departments.department_id%TYPE;
BEGIN
EXECUTE IMMEDIATE
[code]....
I called the procedure from an anonymous block
BEGIN
homework('Employees');
END;
It gives me an error
ORA-00905: missing keyword