I am migrating one of my live database from 10g to 11g, which is having its standby database.how can we migrate standby database as well in 11g. do we need to create standby database again or is there any steps?
View 3 RepliesI have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
can i create physical standby database to logical standby database.
my structure
============
primary database--->physical standby-->logical standby
for fail over case ==>physical standby convert to primary and logical standby connected to current primary database.
I am part of a upgradation and migration proj where an Oracle 9i db on a HP-UX OS is going to be upgraded and migrated as 10g db on a solaris OS environment.I am from the application team(Data warehouse team) and we are yet to allocate a specific DBA for taking care of this activity.
We are still in the requirements stage...different requirements and challenges that should be taken care and would occur in the roadmap of this project from a DBA perspective.All your inputs would be very valuable to me.
we are planning to do the migration from 10g to 11g and from old servers to new servers.
View 1 Replies View RelatedMigration from VFP9 to Oracle Database for my personal and microbusiness DBMS.
For a start, having installed Oracle ORACLE win64_11gR2_database (see Attached file) and logged in, how do I create a simple data table and how do I create a front end for the user - a "FORM" to get user input of name, date, bill no etc.,
Attached File(s)
ORACLE_win64_11gR2_database_Installer_Success_Files_Where_all_stored_Be_Cautious.jpg ( 194.7K )
Number of downloads: 1
I wanted to migrate my database from one of the Solaris machine to other solaris(High performance) machine.We are using oracle 9i database.
I wanted to take RMAN backup with oracle 9i database.and wanted to restore that database to other machine and perform recovery.This process will be on production database and requirenement is to reduce downtime.
let me know RMAN backup procedure which will have less downtime of the database.
I need to migrate data from Mysql database to Oracle11g database.
a) is there any method available to import the all the sqls like table script,constraint scripts,data(insert ) script from Mysql.so that we can apply the sql directly to the oracle schema after making necessary changes(like datatype).
b) Is there any free tool available for the migration.
I am working on database migration project SQL server to oracle, convert this query sql server to oracle basic thing i change but i still getting following error: ORA-01799: A column may not be outer joined to a subquery.
SELECT
h.unique_id,
h.customer_id, h.sequence_id, h.name_first, h.name_last, h.email,
h.tn_work, h.tn_home, h.tn_cell, h.tn_work_do, h.tn_home_do, h.tn_cell_do, h.primary_contact_id,h.ssn, h.created, h.customer_status_id, h.doi, h.dod,
NVL(CASE WHEN h.primary_contact_id = 1 THEN tn_home WHEN h.primary_contact_id = 2 THEN tn_cell
WHEN h.primary_contact_id = 3 THEN tn_work END, '') AS ext_primary_contact, ext_customer_status_desc FROM customer c
INNER JOIN customer_history h
[code]...
I want to migrate our production database from 9.2.0.8.0 to 10.2.0.4.0 through startup migrate ,so request you to kindly provide me a step by step doc or some reference link pertaining with same.
View 2 Replies View RelatedI have one big database which I need to migrate to Oracle, because it rocks with big databases, instead of other databases and when I was made transfer software and all works great except one more think. During this process I found that Oracle normally fill log & undo table, and my question is how to migrate (or can I migrate) database to oracle without filling undo database (deactivate this process) and after that to put database to work normally, because I just need to transfer data as is and from that point Oracle goes on...
View 4 Replies View RelatedI am planning to move the databases in multi master replication from HP-Ux to AIX server. I am planning to use export/import to moving the database. But do I need to drop the replication administrator user before I do export/import?
View 1 Replies View Relatedcurrently holding 9i database on win2000 and front end is dev4.5 so the thing is want to upgrade by win2008 pn 32bit with 10gdatabase want to keep the front end application as it is 4.5...
will it be compiatble 10g database on 32bit 2008 and front end 4.5developer forms and reports?
can i migrate 9i database to 10g database, what are the steps for full import??
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
View 1 Replies View Relatedcreating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.
View 8 Replies View Relatedwhat are the ways provided by oracle for database migration,except datapump? and which one is recomended
View 1 Replies View Related2 Database.
TP1 Database - Oracle RAC 11g (2 Node)
TP2 database - Single Instance
Is it possible to migrate from RAC to Non-RAC(Single Instance)?
Our requirement is, 3 Oracle Schemas@TP1(having DW data) we need to move it to TP2 Database.
I have failed to duplicate target db for standby from active db using spfile with the following errors:
RMAN-03009: failure of backup command on prim1 channel at 08/11/2010 05:25:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
[Code].....
The script has successfully created on standby db all controlfiles and also has copied 2 data files DATA01.DBF and DATA02.DBF into the correct location. Then the errors above kicked in and stopped the rman dup process.
Which is the best method for migration of database from Oracle 9iR2,10gR2 to 11gR2.
Current Environment
Server1
Operating System: Sun OS 5.10
Oracle Database: Oracle Database Enterprise Edition 9.2.0.8 (32 bit)
Average Db Size: 600Gb
RAc Configuration: No
Server2
Operating System: Sun OS 5.10
Oracle Database: Oracle Database Enterprise Edition 10.2.0.3 (64 bit)
Average Db Size: 600Gb
RAC Configuration: No
Proposed Environment
Server1 and Server2
Operating System: Sun Solaris 10
Oracle Database: Oracle Database Enterprise Edition 11.2.0.3 (64 bit)
RAC Configuration: No
Hardware is New : Yes
How to migrate Oracle Standalone Database to Oracle Real Application Cluster?
View 1 Replies View Related"How to Migrate Oracle 11gR2 32bit to 11gR2 64bit on Microsoft Windows"
Currently we are having Microsoft Windows Server 2003 standard Edition service pack 2 and we are trying to migrate it to microsoft windows server 2008 Release 2 standard Edition
My standby got corrupted and I need to restore from Primary database. As it is already setup , no need to configure listener and tnsnames.
At Primary site
==========
1. After shutting down the primary database.
2. copying all .dbf and log files. (need to query v$datafile and v$logfile)
3. Copying archive logs. (not sure about this step)
4. Again restart, create control file for standby database.
5. Restart primary database.
Standby
=====
1. After changing the location of control file on standby parameter file (initSTANDBYDB.ora)
2. Startup nomount pfile='/pfile/location'
3. Mount the standby database.
4. Putting database in MRM mode.
DB = Oracle 10.2.0.4
OS = Solaris 10 Sparc
I am trying to create a physical standby database using the add standby database option within OEM 10g. This is something we have done numerous times before on 10g and 11g db's without a single issue, but for some reason, this time after selecting my RMAN backup location and staging area location , I am getting the following error when I click Next:
RMAN Backup Location - The specified RMAN backup is invalid. Could not identify controlfile from the backup
It is the latest backup (using RMAN catalog) from the previous evening and includes datafiles and control file.
Here is the output for List backup:
BS Key Size Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
1741586 7.70G DISK 00:03:26 06-DEC-12
BP Key: 1741590 Status: AVAILABLE Compressed: NO Tag: TAG20121206T220033
Piece Name: /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4811_1.bus
[code].....
The only difference between creating a standby for this db and others we have created is that the file system the backups are stored on is on a non-global zone shared via nfs mount.
I know that when I try and share that filesystem with other servers I get the message: share_nfs: Cannot share filesystems in non-global zones If the /backup filesystem is not shared with any other servers would OEM be able to read from that NGZ? The filesystem is available to connect to using ssh from other locations, but not sure how OEM handles this part of the process.
I need to rename an Oracle9i database on windows which has a physical standby database running on a different machine.
I have the steps to rename the primary database but am unsure of it's impact on the physical standby database. It seems like I will have to re-create the physical standby database, since renaming the primary database involves opening the db with "resetlogs". It's a production environment hence can't play with it without knowing the results.
How to create a standby database with and without rman......?
View 3 Replies View Relatedwe are getting below error on alert log file in logical standby database from May 2013 how can find time of sequence creation and how can restore these sequence redo files and sysnc databases primary and standby
Snipped of alert log:
Wed Jun 10 15:29:40 2013
Fetching gap sequence in thread 1, gap sequence 62079-62178
Wed Jun 10 15:29:50 2013
Fetching gap sequence in thread 1, gap sequence 62079-62178
Wed Jun 10 15:30:01 2013
Fetching gap sequence in thread 1, gap sequence 62079-62178
I have changed from the "ARCH" attribute to "LGWR" attribute of the LOG_ARCHIVE_DEST_n initialization parameter. But I have not changed the protection mode(Maximum Performance). I would like to know whether there is any impact in the behavior of the database, if we do not change the mode from "MAXIMUM PERFORMANCE" to "MAXIMUM AVAILABILITY"?
View 3 Replies View Related: I noticed three data files on my standby show's they are corrupted. What will be the easy and fast way to sync them up from my production database?
View 1 Replies View Related