Server Administration :: OLAP Installation On 10g
Apr 9, 2012I am using the oracle version 10.2.0.1. on windows XP platform.I need to install OLAP.
View 5 RepliesI am using the oracle version 10.2.0.1. on windows XP platform.I need to install OLAP.
View 5 Repliesafter a long time,(i never remember when was the last time i installed 9i)i was asked to install 9i.So, whether i install server or cilent i get this error <attachment>
after i ignore it and finished the installation,The server installation gets abruptly ended for the client i get TNS errors.
I want to install Oracle 11g R2 in windows 2008 64 bit server. How can I know whether my server is ready to install Oracle ie is all components are available in server or any patch is to be applied etc.
View 3 Replies View Relatedwe had a db working fine..we just take a proper shutdown of db and then try restart os...os never comes up.we have db installed in separate drive tahn C:(where os reside)
now the os is instaaled again...oracle is gone? i have left with app folder and all the database file in other drive
i do the fresh oracle installation/...now what things from the old app folder should i replace in new app folder created to get all the data back??
I am trying to install oracle 11g on windows 2003 ent with sp2 , where I am getting an error, The java runtime environment was not found at bin/javaw.exe. hence the oracle universal installer cannot be run.
View 4 Replies View RelatedI want to install Oracle software 10g R2 at linux platform. I want to install it at Silent mode, but not able to find the .rsp(response) file. I have created the .rsp(response file) from oui , hut not able to configure the same.
View 1 Replies View RelatedI want to install the partitioning option in my oracle database. I have the license. When i run the installer and select the partitioning option, the installation begins from beginning overwriting my old setup files. How can i avoid this and only install partitioning.
View 2 Replies View RelatedI am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
I have installed 11g R2 on windows 7 32bit then I uninstall it through deinstall but now again i am installing it it says
Cause - The chosen installation conflicted with software already installed in the given Oracle home.
Action - Install into a different Oracle home.
How can I remove that Oracle Home.
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies View RelatedWhen Oracle was installed, there was an error in the server's domain name (missing a "."). Is there an easy way to fix this domain name in the Oracle installation after the fact? I know about tnsnames.ora, pfile, system parameters, and I'm pretty sure I can do emagent -config. My concern is that the "Installed Products" would not like the fact that the domain name is now "abc.proj.org" when installation was done on "abcproj.org". The /etc/hosts file had "abcproj.org", and we want to fix it to "abc.proj.org".
I need to reinstall Oracle -- is there a better way?
Yesterday i installed oracle 11g r2 by default i installed database Oracle with the installation .but today i tried to create the database with the name green tat also completed successfully..the problem is in startup
export oracle_sid=green
sqlplus '/ as sysdba'
startup
database mounted
select instance_name from v$instance; But it SHowing the instance name as Oracle...i tried with the other method also
export oracle_sid=green
sqlplus /nolog
conn sys/b123 as sysdba
database mounted
select instance_name from V$parameter;
and it shows instance name as green..i tried to see the datafile location for green database
select file_name from dba_data_files; it shows the orcl datafile locations.
Are there any good information about on how to move a 10g database to a new server? We will keep the same disks on the SAN, but make a new installation on the new server.
View 3 Replies View RelatedIm trying to install oracle 11g release 2(11.2.0.1.0) on oracle solaris 10(x86-64) on vmware on my laptop and my host OS is vista home basic ...
i successfully installed solaris on vmware but while im trying install 11g on it,its show .oui:syntax error at line 1: '|' unexpected.
i follow oracle documentation as well as OFA...
A question about the WMSYS user that comes with the default installation :
I've locked it because it has the DBA role. The question is :Will this impact the database?
A link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies View Relatedi am installing oracle 11g rel2 ( o/s : hp ux 11.31 ). already we have 11g rel1 installed in the machine where oracle inventory location is /oracle/oraInventory where /oracle is ORACLE_BASE directory..
cd /oracle
ls -ltr
drwxrwxr-x 4 ora11gr1 dba 8192 Aug 30 00:19 oraInventory
now when i install oracle 11g rel2 on the same machine, it should use the existing oraInventory..but it is prompting us to enter the new location for oraInventory during installation....but as per the naming convention, we need to keep inventory directory under /oracle/oraInventory only..
when i select oraInventory location as /oracle/oraInventory from wizard, iam getting below error:
[INS-32055] The Central Inventory is located in the Oracle base.
[INS-32035] Unable to create a new central inventory at the specified location.
should i uninstall the exisitng oracle 11g rel1 and then should i install rel2 (i.e what iam trying to install now ) ?if so, after instlaling rel2, then should i install rel1 ?
I am trying to install Oracle 11g Release 2 on Redhat Enterprise Linux 5.2 (vmware image) but after 50% installation it through errors while copying files on the server. I also tried on Windows 2003 Server R2 (physical m/c as well as vmware image) and faced same problems. I did installation of Oracle 11g Release 1 and didn't find any problems.
View 15 Replies View RelatedI want to install Oracle EE 11gR2 on my Windows 7 Professional 64-bit laptop. Installed memory is 8GB.I need to install 32-bit server since Oracle Warehouse Builder will not run on a 64-bit o/s. Further, I use Toad 9.7.2 which will only recognise client 32-bit.
I had a few failed attempts, especially when the database was being created with the ORA-12560: TNS:protocol adapter error,
So here's what I did:
Changed C:WindowsSystem32driversetchosts so that it contains two lines 127.0.0.1 localhost & ::1 localhost
Changed properties of setup.exe in the installation directory to be Windows XP SP2 compatible and run as administrator
Selected "install database software only" (so I could figure out at what step the installation fails)
Selected "single instance"
Selected "Enterprise Edition"
Selected oracle base "c:app" (instead of default location c:appd_seng)
Copy of files was completed successfully, log file was created in c:program files(x86)oracleinventorylogs & registry entries were added to "HKEY_LOCAL_MACHINESOFTWAREWow6432NodeORACLE" (with keys KEY_OraDb11g_home1, ODP.NET & OracleMTSRecoveryService), and the following services were created:
OracleMTSRecoveryService: Started/Automatic
OracleOraDb11g_home1ClrAgent: Not started/Manual
OracleRemExecService: Started/Disabled
There are no listener.ora & tnsnames.ora yet. Sqlnet.ora is created with the line SQLNET.AUTHENTICATION_SERVICES = (NTS)
Now I went to Start, All Programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Net Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it. I selected "Listener Configuration", added a listener called LISTENER, TCP protocol, port 1521 and finished. A service called "OracleOraDb11g_home1TNSListener" was created and started in automatic mode. The PATH was updated and listener.ora was created with the lines:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:appproduct11.2.0dbhome_1)
[code]...
Tnsnames.ora is also creaed with the contents:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
At the command prompt, lsnrctl.status shows:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:42
:19
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 15-APR-2012 12:37:54
[code]...
At the command prompt, lsnrctl.services shows: LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:43:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully Now I went to start, all programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Database Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it.
I chose to create a databaseGeneral purpose Global database name ORCL SID ORCL Chose "Configure Enterprise Manager" & "Configure Database Control for local management" and disabled "Automatic maintenance tasks" Used the same password for all accounts
Selected storage type "File System" & "Use Database File Locations from Template" Unchecked Flash Recovery & Archiving Selected "Sample Schemas", "Typical" memory size (1228MB), "Use Automatic Memory Management" Left sizing/character sets/connection mode as default, and Selected "Generate Database Creation Scripts" in C:appadminORCLscripts (if I choose to Create Database, it fails with TNS Protocol Adapter Error).
I now open ORCL.bat in an editor, go to command prompt, create the directories as per the file, set ORACLE_SID=ORCL & path.
Running C:appproduct11.2.0dbhome_1inoradim.exe -new -sid ORCL -startmode manual -spfile gives a message "instance created" & services "OracleJobSchedulerORCL", "OracleVssWriterORCL" (started) & "OracleServiceORCL" (started) are created.
The next step C:appproduct11.2.0dbhome_1inoradim.exe -edit -sid ORCL -startmode auto -srvcstart system give an error "Unable to start service, OS Error 1056" (probably implies services already running), nothing is present in the windows alert logs about this. If I stop the service OracleVssWriterORCL, then this command completes, although no messages are returned.
The next step in the batch file starts sqplus /nolog and calls ORCL.sql.
ORCL.sql accepts passwords for sys, system, sysman & dbsnmp. It then executes host C:appproduct11.2.0dbhome_1inorapwd.exe file=C:appproduct11.2.0dbhome_1databasePWDORCL.ora force=y, which prompts me for the password for sys.
ORCL.sql then calls CloneRmanRestore.sql, which then tries to run connect "SYS"/"&&sysPassword" as SYSDBA
This is when I get the error ORA-12560: TNS:protocol adapter error, which has been haunting me for days.
My gut feel is that the database creation step at sqlplus is unable to recognise the listener...or probably it does not recognise the modified registry location (with Wow6432Node), the file oracle.key in C:appproduct11.2.0dbhome_1BIN shows the string SOFTWAREORACLEKEY_OraDb11g_home1.
I then changed oracle.key to point to SOFTWAREWow6432NodeORACLEKEY_OraDb11g_home1, restarted the listener and ORCL service, but connecting as sys returns the same error.
Does installation of oracle label security and data vault causes overhead? How about after installation and then register with database. How much overhead?
Note that I don't want to use it for now. Then what are the reasons for registering with oracle database?
Do we have KM available in ODI 11g for integration with Microsoft OLAP?
View 1 Replies View RelatedIs there a way where i can extract the data from Oracle Express 6 (OLAP data) into an excel or any other format, so that the same can be loaded onto a MS Sql or a normal Oracle database.
View 1 Replies View RelatedI upgraded a database on Win64 from 11.2.0.1 to 11.2.0.3 Patch 10.
The 'Pre-Upgrade Information Tool' said 'Oracle OLAP API [upgrade] INVALID' bevore the upgrade. The upgrade procedure didn't then do the upgrade of OLAP. Now several objects of OLAPSYS and the object CTXSYS.DRIOPT are invalid and can not be validated by compilation. What should i do now?
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI'm trying to deduct x hours from a timestamp value. Everything works fine if x yields a result that is on the same day as the value I'm deducting it from. However, if it yields the day before then it gives the wrong answer using DML (although in SQL it works fine). Let me explain with an example:
Let's say current_timestamp is 20-MAR-12 09.40.00.000000 +00:00
If I deduct 8 hours from this I get the correct answer: 20-mar-12 01:40:00 (syntax: show current_timestamp-8/24)
If however, I deduct 10 hours from it (which takes it to the day before) I get garbage: 20-mar-12 00:20:00 (syntax: show current_timestamp-10/24). It should say: 19-mar-12 23:40:00
In SQL I get the correct result every time. So, my question is, is this a bug or intended behaviour? If the latter then what is it doing and how can I get it to give the answer I'm looking for?
What I'm trying to do is convert a timestamp from one timezone to another using DML. The NEW_TIME function will only give me what I want if I know whether the "to" timezone is currently in daylight saving or not. eg. Must I use CST or CDT?
The full syntax I'm using to try and achieve my aim is below.
show to_char( to_date( '2012-03-19--15-37-23' 'YYYY-MM-DD--HH24-MI-SS' )-(convert( extchars( tz_offset( 'AMERICA/CHICAGO' ) 3, 1 ) int )/24) 'YYYY-MM-DD--HH24-MI-SS' )
where 2012-03-19--15-37-23 is a user-supplied argument.
I have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and working. I need install the client 32x because some applications require.
View 2 Replies View RelatedI have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and workingI need install the client 32x because some applications require.
View 8 Replies View RelatedI am trying to install oracle developer days 4.1 to test the oracle apex 4.1. When I load the .ovf image into virtual box and launch it, I go to
[URL]........
but I cannot see the administration page, it doesn't show me anything. Is there any installations that I have to do or missed to make apex work ?
Oracle Database version: 11.2.0.2 / sparc / 64bit.
Os Version: Solaris 10 with update 6(or more).
Requirement:
OS backup (without Oracle binary/software and database) will be taken from existing server. The server will be "zoned"(container or may call virtual machine). The backup will be restored on the vm; all database related mount point will be there. Installation of same Oracle software and creation of test database.
Scenario:
Before starting oracle installation i am on an OS in which the oracle software was previously installed. But the software files/binaries are not present. I am just putting the software again through installation. Now all the prerequisites are met and oracle project/user/group is already there as os is backed up from previous working setup.
Question:
What should i take care for this installation?Is it will be a simple installation just running the runinstaller?
How To Run Forms 6i from Server without Runtime Installation on Client Pc.
View 5 Replies View Related