We have migrated database data from physical servers to virtual servers. i want to ensure all database parameters are set correctly in both physical and vblock servers. My question is what are all the parameters need to check and compare in both servers to ensure database from both servers ( physical/vblock ) are in sync.
Database used -- RAC database
OS used -- RHL 5.7
I have a simple question about database sessions. The value of parameter "sessions" is set to 500 and the users connect to database through an application server(Jboss). There are more than 500 users connect to the database through application.
My question is, how more than 500 users can connect to the database without any issue, if we set the value of "sessions" parameter to 500?
I often use "alter session set xxx=xxx;" command to change parameter value temporarily. After that, how to reset parameter value to default and I don't want logout sqlplus.
View 3 Replies View RelatedSQL> alter system set sga_max_size=1G scope=spfile;
System altered.
SQL> startup force
ORA-12545: Connect failed because target host or object does not exis
SQL> show parameter sga
ERROR:
ORA-03114: not connected to ORACLE
SQL> startup force
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL> startup force
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
How to change db timezone parameter. My application team has asked me to change the db timzone parameter by following sql.
ALTER database SET TIME_ZONE = '+10:00';
Is this way is the correct one , and do we have any impact on database and does it require a db bounce.
It always used to be that Automatic Memory Management and Linux huge pages were incompatible: you had to use one or the other. But 11.2.0.2 has new parameter, USE_LARGE_PAGES. This isn't documented apart from a few articles on metalink, but Googling it suggests that if it is on TRUE (the default) or ONLY then I can use AMM with huge pages.
View 3 Replies View RelatedI have a question ragarding undo tablespace. I want to ask that why only undo tablespace information we need to specify in parameter file. We do not specify any other tablespace information. Not even for temporary tablespace. Then why we need to give undo tablespace name while instance is creating.
View 5 Replies View Relatedwhich initializaion parameter cant be change after creating the database?
View 5 Replies View RelatedCurrently I am working on conversion project. We want to verify the both applications updated database values are same or not.
if you run same transaction in both application values are updated in the database. I want compare both database tables, its updated same values in table or any mismatch in the table, is there any tools available right now to compare the two rows values in same tables.
When I list the parameters with "show parameter", I get only numeric value for hash_area_size with no unit, what is the unit for that value and conversion of it to MegaBytes.
View 3 Replies View RelatedI want to change cursor_sharing, open_cursors and session_cached_cursors parameter values for SPFILE (Only SPFILE) using SQL Query.
I have found following SQL Queries, but I don't know these queries are only for SPFILE or not.
ALTER SESSION SET cursor_sharing='EXACT';
ALTER system set open_cursors=2500;
ALTER SESSION set session_cached_cursors=70;
I need SQL Queries only for SPFILE.
quick check on a hidden parameter? I need to know the default value and possible values for _serial_direct_read on various releases, I have only 11.2.0.3 available right now and I'ld like to know this for 11.2.x.x 11.1.x.x, and 10.2.x.x.
Below is the query that will show what it is currently which (unless you've changed it) will be the default: auto for my 11.2.0.3. Then to see the options, try to set it to something wrong, my options are false/true/never/auto/always. I think false/true were the only choices for 10.2 and are maintained only for compatibility. But I can't rememebnr 11.1.
orcl>
orcl> set lin 80
orcl> select KSPPSTVL from x$ksppcv join x$ksppi using (indx) where ksppinm='_serial_direct_read';
KSPPSTVL
--------------------------------------------------------------------------------
auto
orcl>
orcl> alter system set "_serial_direct_read"=rubbish;
alter system set "_serial_direct_read"=rubbish
*
ERROR at line 1: ORA-00096: invalid value RUBBISH for parameter _serial_direct_read, must be from among false, true, never, auto, always
orcl>
update: added 11.1.x.x to my wishlist
I am getting the following error while starting database.
ORA-32004:obsolete and/or deprecated parameter(s) specified
I have two columns in database
INPUTDATE DDMMYYYY
and
OUTPUTDATE YYYYMMDD
I want to compare both the columns because of format of columns i am getting problem to compare.
How oracle deals with the setting of init.ora parameter compatible.
e.g. we have
DB Version=10.2.0.4
compatible=10.2.0
what is the possible leak for us ? Is there any description about the features changed in 10.2 up to 10.2.0.4 in all steps - so that we can check out which functions we do not have.
I have a question about spfile.
SQL> SELECT COUNT(*) FROM v$parameter WHERE value IS NOT NULL;
COUNT(*)
----------
246
SQL> SELECT COUNT(*) FROM v$spparameter WHERE value IS NOT NULL;
COUNT(*)
----------
20
v$parameter displays information about the initialization parameters that are currently in effect for the session,but v$spparameter displays information about the contents of the spfile.I want to know why the count of parameters whose values are not null in v$parameter is greater.where are they from? My initialization parameter file is spfile.
i try to startup a database, and get that obsolete/deprecated parameter specified(ORA-32004: obsolete and/or deprecated parameter(s) specified)so i try to reset the parameter, but it seems it is already reset(not in spfile), so maybe this is in memory. SO now i try to reset with scope = memory or both, it gives this error(ORA-32029: resetting with SCOPE=MEMORY or SCOPE=BOTH is currently not supported).
what to do, because now i cannot reset with scope = memory and in spfile it is not there but still it comes in deprecated parameter.
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies View Relatedi am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies View RelatedI am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
I have database in single server. I already have ORACLE_SID=stagedb. So i want to create new sid and named as proddb.Is it possible have multiple db in single server? This server not running as RAC. It run as single only.
View 1 Replies View Relateddatabase administration , we are planning to use amazon cloud database , this database does not allow us to login to server machine , unfortunately amazon don't provide ssh to this machine , in general for doing any of adminstration task on the database will there be need to log into the machine ? we can always log in through toad or any other sql client but we cannot do ssh to server..general can this limitation effect administration ?
View 9 Replies View RelatedI recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedI am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007
2 /
User altered.
SQL> connect sys/mypass007
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
[code]...
SQL> conn sysoper/mypass007
ERROR:
ORA-01017: invalid username/password; logon denied
I want to know if I can access a procedure created on Database server A from database server B.
View 2 Replies View RelatedWe have an Oracle Server database of Size 50 GB having 10 GB Data. And Planning to have a new Database Server of 200GB . So my question is after moving all the 10 GB data to 200 GB Database Server, will the performance of the system come down? Will it reduce the speed?
View 9 Replies View RelatedCan I extract data from our Oracle server regarding the no. of sessions per day? But the problem is that our Boss wants a previous dates from April 11-17, 2011.
View 4 Replies View RelatedI have some requirement wherein I need to install Oracle 9i database server (9.2.0.7). I am not getting it on Oracle website. where can I get the download.
View 1 Replies View Relatedsee as i said keep on my database down in the night time around 9 pm. the OS redhat linux 5 restarting morning around 6.45 am.when i check alert_log there is no indication.when i check OS log , OS restarting around 6.45 amchecked in the log file in OS level
location: /var/log
i found this
Jun 7 06:45:33 Alraya syslogd 1.4.1: restart.
Jun 8 06:42:22 Alraya syslogd 1.4.1: restart.
Jun 9 06:47:12 Alraya syslogd 1.4.1: restart.
what is this mean, system restarting around 6:45 daily i think now i m posting listener.log for reference
<b>06-JUN-2010 21:04:52 *</b> (CONNECT_DATA=(CID=(PROGRAM=)(HOST=Alraya)(USER=alrayaora))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADD
RESS=(PROTOCOL=TCP)(HOST=Alraya)(PORT=1521)))(VERSION=169869568)) * status * 0
06-JUN-2010 21:05:05 * (CONNECT_DATA=(SID=alraya)(CID=(PROGRAM=perl@Alraya)(HOST=Alraya)
[code]...
OS is restarting around 6.45 in the morning, but database getting down night around 9 pm itself why then in the morning if i bounce the database it starting with no problem
