Server Administration :: Deprecated Parameter Not In Spfile And Cannot Reset In Memory?
Apr 12, 2013
i try to startup a database, and get that obsolete/deprecated parameter specified(ORA-32004: obsolete and/or deprecated parameter(s) specified)so i try to reset the parameter, but it seems it is already reset(not in spfile), so maybe this is in memory. SO now i try to reset with scope = memory or both, it gives this error(ORA-32029: resetting with SCOPE=MEMORY or SCOPE=BOTH is currently not supported).
what to do, because now i cannot reset with scope = memory and in spfile it is not there but still it comes in deprecated parameter.
I often use "alter session set xxx=xxx;" command to change parameter value temporarily. After that, how to reset parameter value to default and I don't want logout sqlplus.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production With the Partitioning, OLAP and Data Mining options ******************************************************************************** SYS AS SYSDBA in MyDB....> startup ******************************************************************************** ORA-32004: obsolete and/or deprecated parameter(s) specified ORACLE instance started.
Total System Global Area 612368384 bytes Fixed Size 1250428 bytes Variable Size 121637764 bytes Database Buffers 482344960 bytes Redo Buffers 7135232 bytes Database mounted. Database opened.
SYS AS SYSDBA in MyDB....> ******************************************************************************** PFILE.ORA ******************************************************************************** *.db_name='MYDB' *.db_unique_name='MYDB'
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ lock_sga boolean FALSE pre_page_sga boolean FALSE sga_max_size big integer 3G sga_target big integer 2G
from what I read I beleive this will initially grab 2GB of memory on startup and will grab up to to 3GB of memory total for the SGA. The "total" memory can be allocated to different peices of the SGA when needed but will never exceed 3GB. Is this correct or would these settings infringe on any available memory on a system that is already tight on memory?
Secondly, what happens if both these values are set to the same value?
I have a database started using pfile and spfile parameter shows NULL from command prompt as below:
****************************************************************** Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production With the Partitioning, OLAP and Data Mining options
SQL> show parameter spfile
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ spfile string SQL> *****************************************************************
Now when I want to change/switch database to start using SPFILE, can I do it with out restarting (shutdown and startup)the database.
We are running oracle9i database in windows 2000 server few months before i re sized the SGA to sga_max_size =800M and pga-aggregate_target to 400M, actually we have 4gb RAM out of the we are allocated 1200Mb for SGA and PGA.
My question is if the allocated memory got filled in SGA or PGA whether the system will show any error, because when I am querying from sql> show parameter ; the sga free memory is reducing daily what will happen when it reaches its max_size.
I am facing this problem continuously from last 1 week on my production oracle database.I have performed all kind of changes on parameter but still am getting this error.
Oracle version -> 11g O/S -> windows server 2003 RAM -> 11 GB #########################INIT CONFIG################### convdb.__db_cache_size=536870912 convdb.__java_pool_size=10485760 convdb.__large_pool_size=4194304
I read in few blog and they are saying, oracle11g allocate 60% of the memory to SGA and 40% of the memory to PGA when we enable MEMORY_ TARGET to non-zero.Here are few blogs. URL.....It is not working on that way(60:40) on my database.
Here is my DB version.
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production PL/SQL Release 11.1.0.7.0 - Production CORE 11.1.0.7.0 Production TNS for Linux: Version 11.1.0.7.0 - Production NLSRTL Version 11.1.0.7.0 - Production [code]....
I am not able to find 60%:40% concept in oracle document..so all the above blogs info are wrong?
Quote: If MEMORY_TARGET is set to non zero value: SGA_TARGET, SGA_MAX_SIZE and PGA_AGGREGATE_TARGET are set to 0, 60% of memory mentioned in MEMORY_TARGET is allocated to SGA and rest 40% is kept for PGA.
So, I have set: alter system set sga_target=0 scope=spfile; alter system set pga_aggregate_target=0 scope=spfile; alter system set sga_max_size=0 scope=spfile; alter system set memory_max_target=512M scope=spfile; alter system set memory_target=300M scope=spfile;
, and then bounced the instance. After startup, I see:
SQL> startup ORACLE instance started.
Total System Global Area 272027648 bytes Fixed Size 1384012 bytes Variable Size 100663732 bytes Database Buffers 163577856 bytes Redo Buffers 6402048 bytes Database mounted. Database opened. SQL>
But Total System Global Area should't be in that case 60% of memory mentioned in MEMORY_TARGET? Memory mentioned in MEMORY_TARGET was 300M, and 60% of 300M is 180M, which is not 272027648 bytes.
I just want to use automatic memory management, so I've set the other parameters above to 0. My instance is on my local machine, so just for my own personal use.
C:UsersAdministrator>sqlplus SQL*Plus: Release 10.2.0.4.0 - Production on Thu Jan 17 15:59:33 2013 Copyright (c) 1982, 2007, Oracle. All Rights Reserved. Enter user-name: sys@orcl as sysdba Enter password: Connected to an idle instance. SQL> create pfile from spfile;
[code].....
here its my init.ora file
############################################################################## # Copyright (c) 1991, 2001, 2002 by Oracle Corporation ############################################################################## ########################################### # Cache and I/O ###########################################
I have installed Oracle 10g on my PC and create a Database on it. I wanted to connect it with PL Sql Developer with the same PC but it`s not connecting. It gives the following error "ORA-01019: unable to allocate memory in the user " And some time blank error message box.
I have a 11g database installed on a windows 2003 server. When I created the database I could not assign more than 2GB for SGA_TARGET where as I have 16GB of RAM available on the server. I created the database with SGA_TARGET as 1.5 GB and Memory_TARGET as 2GB. I could create the database successfully. Later when I again tried to increase SGA_TARGET to 6GB and MEMORY_TARGET to 8GB, I could not start the database. I got below error;
ORA-27102: out of memory
OSD-00022: additional error information
O/S-Error: (OS 8) Not enough storage is available to process this command
Quote:I added /pae in the boot.ini Added AWE_WINDOW_SIZE key to registry as 2000000000 Set use_indirect_data_buffers=true added db_block_buffer=131072 (ie. 2GB DB_BLOCK_SIZE=16kb) java_pool_size= 1000M large_pool_size=1000M shared_pool_size=2000M
I got again the same error
I could not use SGA_TARGET. So is AMM not allowed with AWE?
I'm using Oracle8i, with VB6 as front end When i try to connect Oracle using RDO in VB i get an error message from Oracle It is S1000:Oracle ODBC.ora Ora:1043 User Side Memory Corruption.
I have a package when it runs, it terminates with "unable to allocate 4120 bytes of shared memory"error at a particular INSERT statement. So everytime we had this error, we had to flush the shared pool area, after which it would run without issues(for 3-4 weeks).
It had a dynamic subpartition clause framed, which made it to repharse the query every time.So to reduce this, we removed the subpartition clause(made it to static query), which did benefit of not getting shared pool error.
I would like to find the current shared pool memory usage of my program.Is there a way I could find the live consumption of shared pool area of my program(pkg).
i am continuously inserting data to oracle database after some time like 2 hours oracle disconnects,it creates erros like
ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist Process ID: 0 Session ID: 0 Serial number: 0
after restarting the database with shutdown immediate ans startup if i start inserting records it will show erros like
ORA-01653: unable to extend table SYSTEM.GLT_PROT_TRAFFIC_SUM_VOIP by 8192 in tablespace GLCOMM
but i have created the Tablespace with BigFile Auto Extend and max size unlimited, i am having 400GB disk space created Redo logs with 15gb,i have tried serveral times reinstalling the oracle but problem is not solved.
same problem is happenging with small datafiles also,
operating system: windows server 2008 R2 standard oracle server : 11g oracle client : 64 bit
i was unable to log in to oracle database. i am doing the following steps :
- sqlplus /nolog - connect /as sysdba connect to an idle instance - shutdown ORA - 01034: oracle not available ORA - 27101: shared memory realm does not exist
each command i give is showing the following error: ORA - 44412: XE edition memory parameter invalid or not specified.
SQL> alter system set sga_max_size=1G scope=spfile;
System altered.
SQL> startup force ORA-12545: Connect failed because target host or object does not exis SQL> show parameter sga ERROR: ORA-03114: not connected to ORACLE
SQL> startup force ORA-24324: service handle not initialized ORA-01041: internal error. hostdef extension doesn't exist SQL> startup ORA-24324: service handle not initialized ORA-01041: internal error. hostdef extension doesn't exist SQL> startup force ORA-24324: service handle not initialized ORA-01041: internal error. hostdef extension doesn't exist
If I have to create a database on server which has already 5 databases running , how will I set the memory (pga,sga) values . AFAIK it depends on o/s is linux and database version is 10g and 11g .
1)free avaialble memory on server . 2)kernel parameters .
what else has to be considering while initialize memory parameters .
It always used to be that Automatic Memory Management and Linux huge pages were incompatible: you had to use one or the other. But 11.2.0.2 has new parameter, USE_LARGE_PAGES. This isn't documented apart from a few articles on metalink, but Googling it suggests that if it is on TRUE (the default) or ONLY then I can use AMM with huge pages.
I have a question ragarding undo tablespace. I want to ask that why only undo tablespace information we need to specify in parameter file. We do not specify any other tablespace information. Not even for temporary tablespace. Then why we need to give undo tablespace name while instance is creating.
