SQL & PL/SQL :: Statement Level Trigger To Get Rows?
Jun 20, 2012
I have written trigger to satisfy the requirement, when i write row level it comes out with mutating error on table which is very obvious, i have change it to statement level which is fine but it doesn't satisfy the requirement.
I want to capture the id column , which rows got inserted or updated .
Is there any way to get the newly inserted or updated rows as in case of row level i can get it form :new.id.
I have a table which contains data of all calcualted payements for a Land for a particular period i.e. for a Land 124 for the duration of Jan-2010 to Mar-2010 100 rupees rent is paid to the owner.Requirement here is that for a particular duration i.e is for Jan-2010 to Mar-2010 system calculation of rent for a land file multiple times where the table would contain history of each transaction i.e. a user can calculate for a Land 124 for duration fo Jan-2010 to Mar-2010 rent more than ten times and there would be ten records in the table but only one record out of these would be valid where the user cannot calcualte rent for Lnd 124 for Jan-2010 to Mar-2010 without updating the status of the last record in the table for the same land and duration to invlaid. I want to add this business validation through triggers as i am not able to do so through check constarinst.I want to ensure that only one record should be valid for a particular land for a particular duration since row level triggers do not allow us to query the table ion which the trigger is executing i am trying to use statement level trigger but i have a few doubts here: Incase of a Before Insert statement level trigger does the trigger have access to the data which is being inserted into that the table cause whenever a record is being inserted into a table the systen would check through the trigger that if there is a valid (payment_status is valid) payment record in the table for that same land file and same duration.If there is a valid record then the trigger would through an exception. I know you can use a row level trigger with an autonomous transaction should work wihtout giving the mutating table error issue but i wont to know if using a statement level trigger here is feasible!!
between statement level or row level trigger, which trigger will execute first.We have BEFORE_UPDATE_ROWLEVEL_TRIGGER and BEFORE_ UPDATE_ STATEMENT LEVEL_TRIGGER triggers on table product.
I'm trying to create a row-level trigger named TRG_PROB_FEE to run before insert or update of the problem fee attribute on the problem table. If the associated DML command would result in a null for the problem fee(prob_fee), then get the value of the problem fee attribute from the associated contract (con_probfee) to use as the value for problem fee (prob_fee) in the Problem table.
CREATE OR REPLACE TRIGGER TRG_PROB_FEE BEFORE INSERT OR UPDATE OF PROB_FEE ON PROBLEM FOR EACH ROW BEGIN IF :NEW.PROB_FEE IS NULL THEN SELECT CON_PROBFEE INTO PROBLEM FROM CONTRACT WHERE CON_PROBFEE = :NEW.PROB_FEE END IF; END; /
I have created trigger on database level in system schema. While i am creating new tables in system schema, trigger logged the entry but when i am creating table in scott schema it is not working for that.
CREATE OR REPLACE TRIGGER ddltrigger AFTER DDL ON DATABASE BEGIN INSERT INTO aud_log (user_name, ddl_date, ddl_type, object_type, owner, object_name ) VALUES (ora_login_user, SYSDATE, ora_sysevent, ora_dict_obj_type, ora_dict_obj_owner, ora_dict_obj_name ); END;
I have a multi record control block (basically a text item displaying 6 records) where user enters values and I want to process the values using pre-insert trigger.
I want to read value in each record and then do some tasks using a pre-insert trigger before I commit the values. To navigate between the records I was using first_record, next_record, clear_record built-ins but it gives errors like "40737-illegalrestricted procedure next_record in pre-insert trigger".
I would like to create a trigger on a table, but only if the table exists.
This is what i've got so far:
create or replace function tableExists (tablename in varchar2) return boolean is c int; begin
[Code].....
This would give me the error:
PLS-00103: Encountered the symbol "CREATE" when expecting one of the following: ( begin case declare exit for goto if loop mod null pragma raise return select update
I have created the below trigger in Oracle to ensure that a value in a table remains at 180 but I need to restrict this to one row in this table. Is there a way to use an IF statement or a where clause of some type for a particular row in that table? The Row is called ADMIN. Triggers weren't covered in my course so only know a few basic statements.
CREATE OR REPLACE TRIGGER DAYSAGO_trg BEFORE UPDATE ON days_ago FOR EACH ROW BEGIN :NEW.days_ago := 180; END;
I must to build triggers that insert other two rows when the user insert the first record, but the First record must to change Seq to 2 (was 1) then in trigger to insert other record with seq equal 1 and more other record with seq equal 800, I tried some ways , but return error
END ARCTR_ACAO_IMEDIATA_IUreturn me error ORA-06519: active autonomous transaction detected and rolled back ORA-06512: at "CLIBGF.ARCTR_ACAO_IMEDIATA_IU", line 221 ORA-04088: error during execution of trigger 'CLIBGF.ARCTR_ACAO_IMEDIATA_IU' ORA-06512: at line 7using 9.2.08
In a trigger(on update of a table t1) I am trying to write, I am doing an insert on t2 accessing ':new' values of the update on t1.
But in my Insert statement, I am having get one of the column values from another table. How can I write my insert statement in such a way as to insert values contained in ':new' pseudo columns and a select from another table. Below is my insert statement in the trigger : -------
IF (:old.GROUP_YELLOW <> :new.GROUP_YELLOW) THEN INSERT INTO TEST.W_THRESHOLD_LOG (THRESHOLD_LOG_WID, CHANGE_DATE, MEASURE_TYPE_WID, MEASURE_NAME, CUSTOMER_WID, CUSTOMER_NAME, USER_ID, CHANGED_ITEM, PREV_VALUE, NEW_VALUE) VALUES(TEST.W_THRESHOLD_LOG_SEQ.NEXTVAL, SYSDATE, :new.MEASURE_TYPE_WID, 'Rolling Stabilty' , :new.CUSTOMER_WID, 'Customer1', 'User1', 'GROUP_YELLOW', :old.GROUP_YELLOW , :new.GROUP_YELLOW); END IF; -------
In the above code if the hardcoded value 'Customer1' need to be picked from another table, i.e .
SELECT NAME FROM W_CUSTOMER_DIM WHERE CUSTOMER_WID = THRESHOLD.CUSTOMER_WID
how can I rewrite my query to the above value from the select into my insert statement..?
The "HAVING" statement from the query below removes all rows where the "name" field starts with "Port" and it removes all rows where count is less than 11. What I want is to removes all rows where the "name" field starts with "Port" and the count for that row is less than 11.
SELECT deviceEventClassId "Event ID", deviceAddress "Device Address", name "Event Name", deviceHostName "Device Host Name", count( concat(deviceEventClassId, deviceHostName, name)) "Count" FROM events WHERE (deviceVendor = "Bilbo" and
Updating multiple ROWS with different values using single statement. Requirement is to update one column in a table with the values in the other table.
Say we have 3 tables, CORPORATION,CORPORATE PROFILE and MEMBER.
Each MEMBER has CORPORATE PROFILE which in turn is associated with CORPORATION. Now I need to update MEMBER table with CORPORATION identifier for members who belong to corporations with identifiers say 'ABC' and 'DEF'.
MEMBER table contains column 'CORPIDENTIFIER '. CORPORATEPROFILE table contains MEMBERID and CORPORATIONID,this will associate a member with the corporation. CORPORATION table contains ID and CORPIDENTIFIER.
Using the below query I am getting error,ORA-01427:single-row subquery returns more than one row
UPDATE MEMBER M SET M.CORPIDENTIFIER= (SELECT A.IDENTIFIER FROM CORPORATION A,CORPORATEPROFILE B WHERE B.CORPORATIONID=A.ID AND B.MEMBERID=M.ID AND (A.IDENTIFIER LIKE 'ABC' OR A.IDENTIFIER LIKE 'DEF'))
Sub query in the above query returns multiple rows and hence it is throwing the error.More than one members are associated with Corporations ABC and DEF. Is there any way possible to update all the rows in single query with out iterating the result set of sub query.
I have two tables eim_asset and eim_asset1.I want to update the table eim_asset1 using the following update SQL (Or Logic)
update eim_asset1 set emp_emp_login = (select login from s_user where row_id in (select row_id from s_emp_per where row_id in (select pr_emp_id from s_postn where row_id in (select position_id from s_accnt_postn where ou_ext_id in (select row_id from s_org_ext where row_id in (select owner_accnt_id from s_asset where owner_accnt_id is not null)))))
It gives me the ORA error : ORA-01427:single-row subquery returns more than one row.know why I am getting it, because of the one-to-many relationship between owner accounts and their assets.
I want to write a sql query which will fetch the data from manual_temp_master and manual_temp_detl.But from manual_temp_detl table, Price_bkt_cds columns should be displayed as columns. Like the should look like as below:
what is the difference on DBMS_STATS for table level and partition level , which will provide the best optimizer . If the table xxxx is partitioned from 1 to 10 ,then running gather stats on table xxxx as whole table level or partition level which will provide best result on the performance.
I am facing a problem in bulk insert using SELECT statement.My sql statement is like below.
strQuery :='INSERT INTO TAB3 (SELECT t1.c1,t2.c2 FROM TAB1 t1, TAB2 t2 WHERE t1.c1 = t2.c1 AND t1.c3 between 10 and 15 AND)' ....... some other conditions.
EXECUTE IMMEDIATE strQuery...These SQL statements are inside a procedure. And this procedure is called from C#.The number of rows returned by the "SELECT" query is 70.
On the very first time call of this procedure, the number rows inserted using strQuery is 70. But in the next time call (in the same transaction) of the procedure, the number rows inserted is only 50.And further if we are repeating calling this procedure, it will insert sometimes 70 or 50 etc. It is showing some inconsistency.On my initial analysis it is found that, the default optimizer is "ALL_ROWS". When i changed the optimizer mode to "rule", this issue is not coming.I am using Oracle 10g R2 version.
Can you take an incremental backup level 1 or level 0 without archivelogs?
syntax would bebackup as compressed backupset cummulative level 1 database.
The reason I ask is because when I run backup as compressed backupset cummulative level 1 database plus archivelogs # it runs fine, but when I run backup as compressed backupset cummulative level 1 database it just hangs.
UPDATE t_tt_hours a SET a.sak_request = ( SELECT b.sak_request FROM t_requests b, co c
[Code]...
The problem I am having is that it is updating all rows even when it is pulling back a null value for b.sak_request. I've tried adding b.sak_request is not null to the select statement like this:
UPDATE t_tt_hours a SET a.sak_request = ( SELECT b.sak_request FROM t_requests b, co c WHERE b.nam_eds_tracking_id = c.id_dir_track_eds
[Code]...
but it doesn't seem to make a difference. The reason I need to do this is that the difference between where it matches with a valid (non-null) value is 396 rows vs. 12,484 rows which is too time consuming to run on my page.