am facing an issue with scheduled jobs. The below script will create a scheduled job to insert a record for every 2 mins into the table "job_table".
--Table script
CREATE TABLE job_table (now DATE);
--Stored procedure run by scheduled job
CREATE OR REPLACE PROCEDURE test1 IS
BEGIN
[code]...
The scheduled job does not require any special grant privillege as the PUBLIC has access to run it. Anyhow the same set of instruction working for my friend on his machine but not on my environment.
We are using one application. This application is having 2types of jobs. Under each job again there are each 5 sub jobs. All the jobs are scheduled jobs. Now the requirement is The main 2 jobs we are going to run on some specified days( for this we need to mention on what days we want to run.once we gave those day the next steps will start).
for example 1 main job is scheduled on Monday ( we need to schedule it on monday-- we need to write a program for this) under this every sub job will run.these sub jobs are dependent jobs.if sub job completed successfully it should send an email to the distributed mail group which says like " <Job_name> completed successfully" if it fails also it needs to send an email to the distributed group. for each sub job it should send either success/falure mail to the distriuted mail group.
once after completing all the sub jobs successfully it should send a mail to the distributed mail group saying that The main job got completed successfully.these two main jobs will run paralelly but the the second main job will run after 30 mins of 1st job starts.
in the second job also will work as same as job1 process.it should also send mails to the distributed mail groups.The jobs are already scheduled.No need to scheduled the jobs.need to write a pl/sql program like it will check all the jobs and respected sub jobs if any thing got completed/failed it should send an email to the distributed mail group automatically. For that it should monitor all the jobs..that's the requirement.
I have already scheduled all the jobs. now want to write a script for the above requiement.
I have set up two scheduled jobs in oracle 11g for executiong a procedure in specific time intervals. One as Hourly and other as minutely.But the scheduled jobs are not running as per schedule. i.e the minutely job is not running every minute. But If i see the run logs for some period it would have run every minute, and suddenly it will not execute and give a gap of 30 mins or 1 hour and then run again.
P.s. The job priority is set as 3. and except for these two jobs there are no other jobs set. But this is an important job which needs to be run every minute.
JOB_QUEUE_PROCESSES is set to 1000, which is max. And there are only 3 scheduled jobs in the whole DB. BEGIN SYS.DBMS_SCHEDULER.CREATE_JOB ( job_name => 'LOGTBLPURGE'
A procedure in a package uses a database link. The database link is defined without a username and a password. The user that uses the database link is supposed to be present in the opposite database as wel.
When the procedure is started in SQL*Plus or TOAD it runs perfect. But the procedure has to run in a scheduled job. And that doesn't work. The procedure fails because of: ORA-01017 invalid username/password. The user that is used to run the scheduled job is the right one.
I have created a materialized view log on table testing_mview_rev in 11g:
SQL> CREATE MATERIALIZED VIEW LOG ON testing_mview_rev WITH ROWID;
Materialized view log created.
And a MV on it in 10g:
SQL> create materialized view testing_mview_1_rev REFRESH Force start with (sysdate) next (sysdate+1/1440) with rowid as select * from testing_mview_rev@S58_TO_S56; Materialized view created.
Now this is suppose to automatically refresh itself every minute but refresh is failing. However manual refresh is working fine.
what I have missed here. is there any other way to schedule the MV to run every minute?
I have a job running under HUMADM user and would like disable or drop it.I do not have the login credentials of HUMADM user but can log into the database as system/sys user.
When I run the below commands as sys/system user it says humadmjob must be a job or it is not running.This is because it is looking for the job under sys/system user.
BEGIN dbms_scheduler.create_schedule( schedule_name => 'INTERVAL_EVERY_1_MINUTES', start_date => trunc(sysdate)+18/24, repeat_interval => 'freq=MINUTELY;interval=1', comments => 'Runtime: Every day all 1 minutes'); END;-- program code BEGIN
[code]....
all above three code compiled successfully . but it is not running automatically and not run every 1 minute.
I try to run this manuall by using following code
BEGIN dbms_scheduler.run_job('JOB_FEED_UK_DATA',TRUE); END;
It works fine..
create or replace PROCEDURE LOAD_CUSTOMERS_UK IS BEGIN Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (1,'SMITH','LONDON'); Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (2,'JONES','LONDON'); Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (3,'BROWN','BRIGHTON');
i have batch file name exptab,to export all table in database
for example @echo off exp scott/tigger tables=emp file=C:impemp.dmp LOG =C:implog1 batch file working fine when i click on it,
I need to use the Scheduled Tasks in windows 2003 so when the computer startup batch file will run automatically i follow all the step but its not working i try the same story with windows xp still problem exist .
As I was observing the space issues on my db server. I found that there is lots of Trm and Trc file which is being created very much frequently. Due to this its consuming lots of space even the size of each files is not more than 1Mb.
For cleaning I am deleting all the trm and trc files mannully using DEL command Os level. How can i schedule the purging of trm and trc files.
Yesterday, there were performance issue at server. So today, when i am generating report for that particular period, found snapshot id sequence is serially but with skipped hourly timed. Instead of generating report at 15:30, it generated at 16:30.
Enter value for num_days: 2
Listing the last 2 days of Completed Snapshots Snap Instance DB Name Snap Id Snap Started Level ------------ ------------ --------- ------------------ ----- tagidev TAGIDEV 2857 10 Sep 2013 00:30 1 2858 10 Sep 2013 01:30 1 2859 10 Sep 2013 02:30 1 2860 10 Sep 2013 03:30 1 2861 10 Sep 2013 04:30 1 2862 10 Sep 2013 05:31 1
[code]....
Below are the details at alert log -
Tue Sep 10 14:28:20 2013 Thread 1 cannot allocate new log, sequence 7029 Checkpoint not complete Current log# 2 seq# 7028 mem# 0: E:APPORACLEORADATATAGIDEVREDO02.LOG Thread 1 advanced to log sequence 7029 (LGWR switch)
[code]....
1) why snap didn't started at 15:30?
2) since database just started at the scheduled time of AWR snap time. But generated at 16:32 instead of 16:30, though last services "SMCO" is started at 16:42. How it snap id generated for this particular time?
3) what does "kewastUnPackStats(): bad magic 1 (0x000000001B3CE48D, 0)" mean?
I copied a sqlplus scheduled job procedure. Procedure successfully created .I fount it here [How to Schedule RMAN Daily Backup? [URL]
The procedure is successfully created. Now, doing the following operations:
1) running that job 2) checking whether that job is running or not 3) listing all other jobs 4) unschedule a scheduled job 5) delete a job 6) edit a job
There is a readonly user on our reporting server. Developers want to use global temporary tables with this user. I don't want the user to have permissions other than readonly.I can grant the user CREATE TABLE privilege and did not grant quota on any permanent tablespace, therefore user would not be unable to create permanent tables but still should be able to create global temporary tables.
Question is would a user with such permissions still be able to utilize temp tables as part of a scheduled job?
Below is the sample code working fine in 10g and not working now in 11g.
CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED "PSTest" AS import java.sql.SQLData; import java.sql.SQLException; import java.sql.SQLInput; import java.sql.SQLOutput; import java.util.List; [code]....
we got the below error: ORA-00932: inconsistent datatypes: expected an IN argument at position 1 that is an instance of an Oracle type convertible to an instance of a user defined Java class got an Oracle type that could not be converted to a java class
Current Oracle version is Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit and the version we are upgrading is Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit
I have two tables : oa_membership_dtl(in this created_by field is varchar2(200 byte) ,oa_partner_usr_dtl(in this table partner_userid is number(8,0) i need to do join on above fields.
I am using following two queries:
select * from oa_membership_dtl membership join oa_partner_usr_dtl partner_user on to_char(partner_user.partner_userid,'9999')=membership.created_by select * from oa_membership_dtl membership join oa_partner_usr_dtl partner_user on rtrim(ltrim(partner_user.partner_userid||' '))=rtrim(ltrim(membership.created_by))
by using first data is not fetched but 2nd is working fine , i am getting the matched records using 2nd query.
I have executed two jobs using dbms_scheduler. The value of the job_queue_process is 10 in my database. It is RAC database with Oracle 10g.
My job gets executed. But the next run is not getting executed at the next run date. In the below example, the systimestamp is 12:27. The first job's next run date is 12:30 so that is fine. But the second job's run date is 12:21 which is 6 mintues less than current time. As a result, the second job does not get executed after this at all..
I am trying to find a way to identify what are the user_jobs currently running. I have found 1 way which requires DBA User ID to execute (e.g. DBA_JOBS and DBA_JOBS_RUNNING) which I don't want.
I believe there is NO equivalent User table for DBA_JOBS_RUNNING table.
I have done my 20 mins search in this forum and unable to find.
I have a procedure that needs to be scheduled as a job. This procedure takes an average of 20-25 minutes to complete. The constraint is that these jobs are submitted using dbms_job.submit with an interval of 5 minutes.
So, will Job2 execute only after Job1 completes [even though Job1 takes 25 minutes to complete] or is there any other mechanism for setting incompatibility for a job with itself.
Assign employees to their jobs in consideration the maximum number of employees to each jobs is 5 employee plus each job has own the maximum number of employees
we need the maximum number of employees for each job 5 to be variable when need to change this maximum for certain job , change this number from database (form the from of job ) not form code )
tables emp emp_no name manager hiredate salary
job job_no job
you can add tables or attributes to tables to complete you business.
i have a production database server with 2 node rac. i now have a separate database server for my report db. Now i want to do an automatic export of the production database or a schema in the production database and then import it automatically to the report db immadiately after the export job finishes at a specific time, say 12 midnight everyday. how do i go about this using crontab or any other better solution. my database is 11gr2 and operating system is rhel 5.7.
