I want to know how I can find which query is taking more time , for example some query's are run from unix, java and from toad,sqlplus. and one query is taking much more time to execute, so how i can get that query and all the details.
View 2 RepliesHow to find time log for query or any procedure like start time and end time and total time.
So that I can tune that queries properly.
Also how can we find estimated query running time.?
I have a query which is executing fast in dev env,but very long time in qa env.What is the criteria when this behaviour occurs.Though qa is having more data than dev.But still it is taking long time for 1 rows also.When I am using the query rownum<=1.So What to check for this.
View 6 Replies View RelatedMy oracle database version is 11.2.0.3.0 where i am having one schema in that schema i am having 3 same tables with same structure same data but with different name.
but problem is in first table when i perform select query it takes 5 sec, in another table it is taking 0 sec and in third table it is taking 10 sec.
For an query, cost was 16Lakhs and was taking 30min, I brought down the cost to 1.5lakhs, but still it is taking 30min.
There were many outer joins and same table has been Used(FROM clause) 5 times in the query. I have introduced WITH clause, and brought down the cost.
select
serialnumber from product where productid in
(select /*+ full parallel(producttask 16) */productid from producttask where
startedtimestamp > to_date('2013-07-04 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and startedtimestamp < to_date('2013-07-05 00:00:00', 'YYYY-MM-DD HH24:MI:SS')
and producttasktypeid in
[code]....
Explain plan output:
Plan hash value: 2779236890
-----------------------------------------------------------------------------------------------------------------------------------------
| Id | Operation | Name| Rows| Bytes | Cost (%CPU)| Time| Pstart| Pstop |
-----------------------------------------------------------------------------------------------------------------------------------------
| 0 | SELECT STATEMENT || 1 | 29 | 9633M (8)|999:59:59 |||
|* 1 | FILTER |||| ||||
| 2 | PARTITION RANGE ALL || 738M| 19G| 6321K (1)| 21:04:17 | 1 | 6821 |
[code]....
Predicate Information (identified by operation id):
---------------------------------------------------
1 - filter( EXISTS (<not feasible>)
4 - filter("PRODUCTID"=:B1)
5 - filter(ROWNUM<100)
12 - access("MODELID"=:B1)
[code]....
Note: - SQL profile "SYS_SQLPROF_014153616b850002" used for this statement
The below query is taking high CPU almost 98% and longer time to execute.
SELECT ancestor,
Max(D.alarmstate) ALARMSTATE,
Max(D.sialarmstate) SIALARMSTATE,
Max(D.uncralarmstate) UNCRALARMSTATE,
Max(M.commstate) COMMSTATE,
Max(M.nncommstate) NNCOMMSTATE,
Max(M.servicestate) SERVICESTATE,
Max(M.abnormal) ABNORMAL,
CASE
[code]....
I need to query a table to get the time difference based on different dates.
SAMPLE DATA:
JOB ID start_time end_time
1 201008190056 19/08/2010 01:23:12
2 201008190123 19/08/2010 01:50:12
2 201008200045 19/08/2010 01:50:12
3 201008070345 7/08/2010 04:50:12
3 201008070345 7/08/2010 04:50:12
1 201008070003 7/08/2010 00:30:12
in the above, for job 1 ,on 19/08/2010 the time difference should be calculated as
01:23:12-00:56:00 and the difference should be in minutes.
for end_time. i can't take the substring as the length of the date varies for 19 and 7. In case of start date, the time has to be in format, hh:mm:ss, to calculate the difference.
I have 10 users in my database, I need to find the time at which a query is fired by any of the users in the database. provide the query for this? I think i have to use V$sql,v$sqlarea or v$sql.
View 1 Replies View RelatedWe are on a GRID DB and using Oracle 11g.
A external reporting application ( SQL SERVER REPORT SERVICES) sends in some comma separated parameter values, which has to be queried against a table with 6-10 million records.
Length of the comma separated value can go upto 5000-6000 in length based on user input in the front end application. This application sends this value in comma separated. i.e., like
'AA1-11101,AA2-34346,AA4-534399,.....' like this at a time the application can send upto 500 values each of length 10. i.e, maximum length can be upto 5000. I used CLOB to handle this because since the length can be 5000 and varchar2 can handle only 4000 long literals.
But the time taken by the CLOB to verify against the table using INSTR is more compared to VARCHAR2.
I found that VARCHAR2 does'nt take much time. Is it a good idea to have VARCHAR2 in the PLSQL procedure as parameter instead of CLOB, since PLSQL VARCHAR2 can handle upto 32000 long values.
I have one query in my production which is taking more CPU time. when that statement executing the CUP is taking more than 90%
I am attaching the sql query and indexes on the table.
I have one big form where the first canvas (content) is taking nearly 20 seconds to display. this is in web mode using forms 10g.
i have tried using SHOW_VIEW(find_view('SAMPLE')) but still no improvement.
I have connected to the database from two sessions
Box 1 : i have executed a procedure.it took few seconds to get executed
Box 2 : I have executed a block of procedure.It is taking 1 min 40 secs to get executed.
why it is taking much time from Box2(for executing a block from procedure) , as the same code executed successfully in a procedure from Box 1.
We were trying to insert approx 76 million records worth of approx 4 GB in a table when the insert operation failed with the archive log error.
The database was hanged, we re-started the database and currently there are no records in the table but when we are firing a select
select count(*)
from table
It's taking approx 2 mins to come out with the result.
We checked and found that there are no locks on the table currently.
what do we need to do to get the performance back
Some of my forms taking to much time while loading on some machines but same forms working fine on other machines with same configuration.
Forms, version: 10.1.2.0.2, Clients: Win_XP_Pro, App Server: Window 2003 Server, IE7, Jinit 1.3.1.26
We are firing a normal Drop command on our database and the database version is 10.2.0.4.The database is running on AIX v5.The command is taking more time than usual .
When i am monitoring the session i can see that a call is being made to procedure "aw_drop_proc".Could i ask you if this is something that is taking more time than usual.
We are not having any partitions on the nested tables .We have a pack of tables and we are dropping this pack through a procedure.The pack comprises of nested tables & normal tables.To drop a nested table it is taking around 6 seconds(Table with no rows) and a normal table(With no rows) it is taking 17 milli seconds.We have a partition on Normal table.
The same operation in windows is taking very less time when compared to AIX.
I have upgraded oracle database from 9i to 11g using export and import utility. After migration we are facing performance issue in report generation, We have observed that First execution of report is taking very long time and when we generate the same report 2 -3 times there is considerable change in the execution time and it is more better than the first execution.
2 days back I have restarted the database and found the same issue. There are around 300 Reports and it is not possible to generate all the reports 2-3 times every time we restart the database.
My Database version as followsOracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64biPL/SQL Release 10.2.0.4.0 - ProductionCORE 10.2.0.4.0 ProductionTNS for Linux: Version 10.2.0.4.0 - ProductionNLSRTL Version 10.2.0.4.0 - Production We have datagaurd setup as well - Huge archive logs are generating in our primary database - Archive logs are shipping to standby with no dealy - But applying the archive logs are taking more in our physical standby database -why it was taking more time to apply archivlogs (sync) in standby ? - What could be possible reasons..? Note : Size of standby redo logs are same as redo log file of primary database - Also standby by redo one or more than online redo log primary. Since i need to report my higer leve stating this is cause for delay in applying archive logs.
View 32 Replies View RelatedI've a query like
update tab1
set col1 = ( select col2 from
tab2
where tab1.id = tab2.id) table 1 has arnd 10,000 rows
table 2 has arnd 1,700,000 rows and has a primary key on column id.This query is taking around 20 secs to execute. I checked the x-plan and most of time taken for table access by index rowid.I checked the stats for the tab2, its just three days old.
We are inserting data using JDBC (Java program) in Oracle 11gR2 DB and Timesten to oracle (using AWT cache group) . In reality insertion in oracle is faster than Timesten Cache DB.
Timesten version - TimesTen Release 11.2.1.7.0 (64 bit Linux/x86_64)
1. It is Client/Server Model.
2. Cpu has 4 core and we are using 3 core for insert the Data.
3. Perm and Temp size is big enough compare to Data Size
4. auto commit=0
5. durable commit=0
6. PassThrough=1
7. LogBufParallelism=3
8. LogPurge=1
9. LockWait = 0.1
In my code I am using delete statement which is taking too much time to execute.
Statement is as follow:
DELETE FROM TRADE_ORDER_EMP_ALLOCATION T
WHERE (ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT)
IN (SELECT ARTEMIS_SOURCE_SYSTEM_ID,NM_ARTEMIS_SOURCE_SYSTEM,CD_BOOK_KEY,ACTIVITY_DT
FROM LOAD_TRADE_ORDER
WHERE IND_IS_BAD_RECORD='N');
Tables Used:
oTRADE_ORDER_EMP_ALLOCATION Row count (329525880)
oLOAD_TRADE_ORDER Row count (29281)
Every column in "IN" clause and select clause is containing index on it
Every time no of rows which to be deleted is vary (May be in hundred ,thousand or hundred thousand )so that I am Unable to use "BITMAP" index on the table "LOAD_TRADE_ORDER" column "IND_IS_BAD_RECORD" though it is containing distinct record in it.
Even table "TRADE_ORDER_EMP_ALLOCATION" is containing "RANGE" PARTITION over it on the column "ARTEMIS_SOURCE_SYSTEM_ID". With this I am enclosing table scripts with Indexes and Partitions over it.
way for fast execution in of above delete statement?
I am working on oracle 11g...I have one normal insert proc
CREATE OR REPLACE PROCEDURE test2
AS
BEGIN
INSERT INTO first_table
(citiversion, financialcollectionid,
dataitemid, dataitemvalue,
[code]....
I am processing 1 lakh rows.tell me the reason why bulk collect is taking more time. ? According to my knowledge it should take less time. do i need to check any parameter?
This is my stored procedure
I have below store procedure:
create or replace
PROCEDURE TESTPERFORMANCE (
o_statuscode OUT NUMBER,
o_statusdescription OUT VARCHAR2,
starttime out timestamp,
time_after_query_TESTJOB out timestamp,
[Code]...
This procedure is taking around 35 minutes when there are 35000 records to loop over (i.e cursor has 35000 records) and TESTJOBTRANSACTIONS table has 90000 records. How to reduce execution time.
How can I convert a DATE to EPOCH time taking care of daylight savings?
I tried with this code but there is a difference of 36000 seconds. eg:Sysdate_To_Epoch('04-Sep-2012') gives 1346716800 whereas it should give 1346680800.
CREATE OR REPLACE FUNCTION Sysdate_To_Epoch(v_date IN DATE)
RETURN NUMBER
IS
[Code]....
I want to use a function in join clause. so i go for pipelined function(using for loop to get record & 1 more loop to fetch in table type variable). i achieved what i required. but problem is it takes much time to fetch data. is there any other approach which returns table records without pipelined function.
View 2 Replies View RelatedExpdp directory=xxx.dmp dumpfile=aaa.dmp logfile=xxx.log FULL=Y
: :: : : :: : : : ;
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 24.87 MB
Processing object type SCHEMA_EXPORT/USER
[code]...
then my export hangs..... checked in alert log nothing found.and then killed the job and reran again but same....checked the status and it's saying EXECUTING.
I am try to import 4G dump in Oracle 11R2 version, in that we have around 9000+ Package Body which is taking huge time than other objects (about 8 to 12 hrs) and also it is expecting lots of system space (roughly about 10GB).
I have tried both parallel and non-parallel.how to improve speed of the package body import.
Details about the Schema & Import No. of objects in Schema
SQL> select object_type,count(1) from user_objects GROUP BY ROLLUP( object_type);
OBJECT_TYPE COUNT(1)
------------------- ----------
FUNCTION 248
INDEX 5161
JAVA CLASS 471
JAVA RESOURCE 1
JAVA SOURCE 16
LIBRARY 1
ORA-00933: SQL command not properly ended
I am working with a new client and am still waiting on access to systems so I'm a bit hampered in looking at details of the database and environment. The database is OLTP and typical response time for returning result sets is under 2 seconds, often less than 1 second.
A simple SELECT on a few columns of v$session_longops (no subqueries, group by, having, etc) ran for more than 5 minutes.
Attached query taking 80000 reads to execute...
View 8 Replies View RelatedMy time zone has the offset of 2 hrs during summer and 1 hr during winter.If I want Oracle to tell me what was offset for particular day for example I want to know the offset for February 01, 2010 and August 01, 2010, is it possible?
View 1 Replies View Related