SQL & PL/SQL :: Function For Going At Start And End Time For Day From Sysdate
Feb 6, 2013I need to go on day start and end time for each day. Any function that will go on start and end time according to sysdate for that day.
View 7 Replies
ADVERTISEMENT
SQL & PL/SQL :: Get End Time By Query Between Start Time And Duration
Jun 16, 2013I Have three field and first field for START TIME ,Second END TIME & Third DURATION AND Putting START TIME AND END TIME i am getting duration in minutes by using code
""SELECT TO_CHAR
(TRUNC (SYSDATE)
+ (TO_DATE (:T_DONATION_END_TIME, 'HH24MI') - TO_DATE (:T_DONATION_START_TIME, 'HH24MI')),
'HH24MI')
INTO :T_DONATION_DURATION
[code].......
PL/SQL :: How To Check If Time Is Closer To Start Or End Time
Jan 31, 2013I have a table which stores apointment start times and appointment end times. For the sake of this thread I will call them appt.start_time and appt.end_time. I then have a check in time and a check out time for the customer. The only thing is they ONLY way to distinguish between a check in time and a check out time is which one has the earlier time and which one has the later time. Obviously the earlier time will be the check and the later time will be the check out.
This is fine, however sometimes they may forget to check a person in or out and I need to determine whether the time should be insert into the check_in column or the check_out column. To do this I was thinking of comparing the time with the appointment start and end time and if it was closer to the appointment start time put it into the check_in column and if its closer to the appointment end time put it into the check_out column. But I was wondering how I would go about doing this.
The time I will want to compare against the appointment start and end time I will store in a variable called v_time and have this as part of my query, im just unsure of what way to write the query so as to check if the time is closer to the start or end time.
SQL & PL/SQL :: Oracle - Compare End-time With The Start-time?
Jun 7, 2010. I have this query:
select asl1.agentsessionid, asl1.endtime, asl2.starttime, 127 as agentstatus
from
(
select asl1.agentsessionid as sessionid1, min(asl2.agentsessionid) as sessionid2
from cti.agentsessionlog asl1
[code]...
As you can see from my where statement I want to compare the endtime with the startime. This query returns zero results. Is there a way to write the where statement different so I can have results?
PL/SQL :: Sysdate Produces 00:00 Time
Apr 11, 2013I have a stored procedure that stores a record containing a date field.
The syntax is
insert into audit_log values (lv_sequence, sysdate, REC_TYPE, p_pln_id, OPER_UPDATE, log_message);
This works except that the date stored in the record has a time of 00:00. This does not work well for an audit log.
How can I store a date that includes a time?
An interesting fact is...I used this same command in SQL Developer to store a record and the date stored did have a time???
PL/SQL :: Select Time From Sysdate
Sep 20, 2013I have to concatenate a date(not sysdate) with the system time and store it in a column having datatype as DATE... So I tried like this....
SELECT TO_CHAR (C_DATE, 'DD-MON-YYYY') || ' ' || TO_CHAR (SYSDATE, 'HH:MI:SS PM') FROM DUAL;
But while inserting the output of the above query in my table it throws error like this... ORA-01830: date format picture ends before converting entire input string Is there any possibility to achieve this.
SQL & PL/SQL :: Use Trunc Function Along With SYSDATE
Mar 12, 2011The reason to use the the trunc function along with the SYSDATE.
E.g. :- TRUNC(SYSDATE).
Why we need to set the current date into midnight? Where we can use this method?
PL/SQL :: DBTIMEZONE To Give +00:00 Since Sysdate Returns As UTC Date Time
Oct 4, 2012I am using Oracle 11g .when i query
select sysdate from dualit returns the current UTC date and time as output.
But when i query
select DBTIMEZONE from dual it returns -07:00 which indicates PDT.
i am wondering is this correct behaviour, i am expecting DBTIMEZONE to give +00:00 since sysdate returns as UTC date time.'
Sysdate - Insert Severity Level Of Call After Certain Amount Of Time
Dec 2, 2011I'm working on a project and I can't figure out the procedure I will need to use. I've got a sysdate field in my "Calls" table which generates a call date + time, however I need to insert a severity level of the call after a certain amount of time, e.g. after 1 hour level turns from level 4 to level 3 and so forth until reaching level 1 after x amount of time. I know I'd need to put in an else if statement within this procedure I just can't work out how to do it with the sysdate field that has also been created.
A bit of info about the table, table name = calls, column 1 = date_time and column 2 is called severity_level
PL/SQL :: Find Duration By Subtracting Start And End Time?
Jun 25, 2013Version: 11.2 I am not an SQL expert. I am trying to subtract the start time and end time and thereby find the difference between these two times. In the below example , the difference between start_time and end_time is around 52 minutes (6:15 PM to 7:07 PM)I tried some stuff to find the difference below. But it didn't work out .
SQL> create table t (start_time date, end_time date); Table created. SQL> desc t Name Null? Type ----------------------------------------------------------------- -------- --------------------- START_TIME DATE END_TIME DATE SQL> insert into t values (to_date('24/JUN/2013 18:15:42', 'DD/MON/YYYY HH24:MI:SS'), to_date('24/JUN/2013 19:07:54','DD/MON/YYYY HH24:MI:SS')); 1 row created. SQL> commit; Commit complete. SQL>SQL>SQL> select * from t; START_TIME END_TIME-------------------- --------------------24 Jun 2013 18:15:42
[Code] .......
PL/SQL :: Group By Data Based On Start And End Time In Range
Mar 28, 2013formatting the data.I want to group the below table data based on the Grade column for a header_data with start_time and end_time displayed in range. I was trying with group by, partitions etc but no luck. I use version 10gr2.
create table rel_data_mf (header_data varchar2(10),start_time varchar2(100),end_time varchar2(100),grade varchar2(1));
--table rel_data_mf data as comma separated values
header_data,start_time,end_time,Grade
ENG,2013-03-29 00:00:00-05:00,2013-03-29 01:00:00-05:00,U
ENG,2013-03-29 01:00:00-05:00,2013-03-29 02:00:00-05:00,U
[Code]...
--Required output
header_data,start_time,end_time,Grade
ENG,2013-03-29 00:00:00-05:00,2013-03-29 03:00:00-05:00,U
ENG,2013-03-29 03:00:00-05:00,2013-03-29 07:00:00-05:00,A
ENG,2013-03-29 07:00:00-05:00,2013-03-29 10:00:00-05:00,U
MATH,2013-03-29 00:00:00-05:00,2013-03-29 03:00:00-05:00,U
MATH,2013-03-29 03:00:00-05:00,2013-03-29 07:00:00-05:00,B
MATH,2013-03-29 07:00:00-05:00,2013-03-29 13:00:00-05:00,U
Installation :: Fail To Start OCR And OS / Error When Start OracleCSService
Jun 5, 2012I'm trying to install Oracle 10g Enterprise Ed. (on Windows 2003 Std. Ed) and I get some errors:
First “Fail to start OCR” I press "continue" and the installation continue. Next “Operative System Error when start OracleCSService” and when I press "continue" the installation finish.
At the end of installation, It seems like Oracle DB is Ok, but not really...I can't connect to database from Enterprise Manager and the OracleCSService is in "Starting mode".
Time Zone Conversion Without Using Function And Without Alter?
Sep 26, 2013I am able to see 1Hr difference in my date fields of SQL output because in UI (User Interface) date field was stored in BST format but DB time zone is in GMT format so how to find a solution for 1 hr difference, here i don't have Privileges to alter DB time zone and i couldn't use function as i have so many SQL's and can't apply that function manually. SO is there any other option to change the DB time zone with out alter it and with out using function.
View 1 Replies View RelatedSQL & PL/SQL :: Pipe Line Function Taking Time To Return Table Record
Mar 15, 2011I want to use a function in join clause. so i go for pipelined function(using for loop to get record & 1 more loop to fetch in table type variable). i achieved what i required. but problem is it takes much time to fetch data. is there any other approach which returns table records without pipelined function.
View 2 Replies View RelatedSQL & PL/SQL :: Sysdate In Where Clause
Apr 22, 2010I am not strong in SQL but can write easy SQL for data extraction but seem to not understand how to correctly use sysdate in a where clause.
Case: I have to create an alert that will email my IT dept once a person is terminated in Oracle HR. The alert will only run once a day with all terminations specified in the alert. Setting up the alert is not the issue, but rather the SQL code I want to use.
The alert will run everyday at CoB 17:30. Now, in my query, how do i specify that the results should be only for the current day? The problem however, is that I also retrieve Person Type which should show as Ex-Employee, but this is only shown the day after the actual termination has been done, because the employee is still active on the date of termination.
SQL & PL/SQL :: Default Value Is Sysdate
Nov 4, 2011During the Table Creation if it possible to Use the SYSDATE is Default Value for a Column.
View 3 Replies View RelatedWriting IF Statement Using SYSDATE?
Apr 22, 2011I have an employee table. I Have to get the data of all employees in such a way that. If today I run the Query,then i have to get the data of all employees working between december 1st of previous year(current year-1 i.e., december 1st 2010.) till today(april 21st). If the query run date is in the month of december(example december 15th) then the query should get the data from december 1st of current year(december 1st 2011) to December 15th. I wrote the if statement some how its not working. I want to make use of this If or Case Statement as the start date of the employee_timestamp. Is this possible here or not.
select * from employee
where
employee.employee_timestamp > (select to_date(to_char(concat('12-01-', extract(YEAR FROM sysdate)-1)),'MM/DD/YYYY') as Startdate From DUAL)
and
employee.employee_timestamp < (SELECT SYSDATE FROM DUAL).
[code]....
SQL & PL/SQL :: Difference Between Sysdate And Current_date
Apr 15, 2010What is the difference between the values of sysdate and current_date ? On querying the database I got the results as sysdate = the date and time for the database server location and current_date = my local system date
If however, i change my local system date - it still shows the correct date.Myunderstanding was that current_date uses the dbtimezone.But..
SQL> select sysdate,current_date from dual;
SYSDATE CURRENT_DATE
-------------------- --------------------
15-APR-2010 06:06:14 15-APR-2010 18:36:15
SQL> select dbtimezone from dual;
DBTIME
------
+00:00
SQL>
SQL & PL/SQL :: Sysdate Between Two Date Columns?
Feb 26, 2013I need to fetch Data from a table X where current date(Sysdate) lies between the datecolumns Active_From and Active_To.
Active_From and Active_To are date columns.
Create table X(
ID number,
Active_From date,
Active_To date
)
Insert into X values (1, sysdate-3,sysdate + 3);
Insert into X values (1, sysdate-2,sysdate + 3);
Insert into X values (1, sysdate-3,sysdate +3);
SQL & PL/SQL :: Adding Number In Sysdate
Apr 26, 2013Can we add 10000 days in SYSDATE using + operator ?
Quote: This I can test it but I don't have database access now that's why I am asking this question
SQL & PL/SQL :: Taking Months Off Sysdate?
Feb 25, 2010I have a table called transaction_dw and I need to select all records that have an account balance that has been below 0 in the past 6 months. initial query I tried was:
select account_balance, timestamp
from transaction_dw
where account_balance < 0
and timestamp between sysdate and sysdate - 6;
but this is only taking 6 days off the sysdate rather than months, how I can get it to take off 6 months?
SQL & PL/SQL :: Select Sysdate From Dual
Aug 30, 2012when i run this nls qusery i got this error
E:oracleproduct10.2.0db_1BIN>sqlplus
SQL*Plus: Release 10.2.0.4.0 - Production on Thu Aug 30 11:45:59 2012
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Enter user-name: sys as sysdba
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select value from v$nls_parameters where parameter= 'NLS_DATE_FORMAT';
VALUE
----------------------------------------------------------------
DD-MON-RR
SQL> select sysdate from dual;
SYSDATE
----------------
30-????? -12
SQL & PL/SQL :: Sysdate Procedure If Statement
Dec 2, 2011I'm working on a project and I can't figure out the procedure I will need to use. I've got a sysdate field in my "Calls" table which generates a call date + time, however I need to insert a severity level of the call after a certain amount of time,
e.g. after 1 hour level turns from level 4 to level 3 and so forth until reaching level 1 after x amount of time. I know I'd need to put in an else if statement within this procedure I just can't work out how to do it with the sysdate field that has also been created.
A bit of info about the table, table name = calls, column 1 = date_time and column 2 is called severity_level
SQL & PL/SQL :: Returning Sysdate Even Run On Sunday
Apr 4, 2010I have following code. It is always returning sysdate even run on Sunday.
declare
vDate date;
begin
if to_char(sysdate,'Day')='Sunday' THEN
vDate := sysdate-3;
[Code]...
if there is something missing or wrong.
Sysdate Showing Wrong Timezone?
May 24, 2012I have one issue My server is in france and it is in french timezone but when I query for sysdate it returns US time.
In '/etc/sysconfig/clock/'
Zone= europe/paris
UTC= true
echo $TZ variable is returning nothing.
sysdate = us time
systimestamp= us time
current_timestamp = french time
current_date = french time
dbtimezone= europe/warsove, sessiontimezone=+2.00( which is also europe timezone offset)
tz_offset(dbtimezone)=+2.00, tz_offset(sessiontimezone)= +2.00 i.e europe
os timezone= europe/paris.
This command "./emctl config agent getTZ" is also returning timezone as europe/paris
Also in "emd.properties" file "agentTZRegion" parameter is set to europe/paris
Oracle version= 11.2.0
Now I don't understand why this sysdate and systimestamp is returning "US time zone" while everything else is returning french time zone.
Compare A Date In One Of Tables To Sysdate?
Mar 5, 2012i wanted to compare a date in one of my tables to sysdate. I have a table reservation and a field in it is Date Reserved From, i wanted to compare this to sysdate and returned the results
View 2 Replies View RelatedChanging Values Of Sysdate In Session Only?
Feb 19, 2007Is there a way of changing the values of sysdate in a session only?
not the formate the actual values
is if the date was 31/12/2003 and i wanted to change it to 31/05/2003
could this be done
Forms :: Set Initial Value As Sysdate Plus 12 Month?
Apr 10, 2010how can I set initial value as sysdate plus 12 month????
View 3 Replies View RelatedForms :: Cannot Display Sysdate In Oracle
Mar 8, 2013when i open my oracle form on my live application server to display sysdate its does not show me.but when i open this same form on my test application server its shows my current sysdate time.
View 1 Replies View RelatedWhere Value Of Systimestamp / Sysdate Comes From And Dbms-scheduler
Mar 27, 2013I saw bunch of other posts but I could find the post that exactly explaining about where the value returned as systimestamp / sysdate comes from or impacted Here is my situation I have an access to this db (let me call db A) and when I access it, I get following result. I don’t have full access to this db so I cannot experiment a lot here.
SYSTIMESTAMP CURRENT_TIMESTAMP LOCALTIMESTAMP DBTIMEZONE SESSIONTIMEZONE
--------------------------------------------------------- --------------------------------------------------------- ------------------------------------------------ --------------------- ----------------------------
27-MAR-13 02.31.55.041411 AM +00:00 26-MAR-13 07.31.55.041416 PM -07:00 26-MAR-13 07.31.55.041416 PM +00:00 -07:00
I’m in PST timezone.I have my db which I have full access as well as its host.I can make result like db A on my db if I started up db and its listener while TZ environment variable equal to UTC.Now I saw in other post that someone was trying to retrieve systimestamp value in a job executed via dbms_scheduler.run_job.
So I did that in two ways. 1 with use_current_session = true and 2 is false for the same.On my db, results are the same (both returns time in UTC) but on db A, I got UTC time when use_current_session = true and PST when use_current_session = false.
So questions are:
What could be the difference in setup between my db and db A?
Is there a query, logfile, or anything I should check to find out what can be the difference?
I tried to find the cause with my db and I could see the same result as db A which is to see UTC time if use_current_session = true and PST time if use_current_session = false by bringing up the db listener after I set TZ environment variable equal to PST8PDT. However this causes systimestamp from sqlplus session become also a PST time.
The reason I’m playing around with the setup and checking systimestamp value is because we are facing the situation where everywhere except pl/sql job submitted by enterprise scheduler service is pointing wrong timezone (PST instead of UTC)
