I am not sure if Oracle has a simple solution for a problem that I have in retrieving data?
Conditions:
As per rule we have to hold data from 7 - 10 years so the data can be searched at any given time.Don't want to purge data and keep the historic data separate so the request can be redirected based on the year.
I am looking for a solution similar to windows .ocx search. When a application is requesting an ocx (active X control) the search happens in C;\windows\system32 and if the ocx doesn't exists then the search is done on the entire system. Similarly can a table be partitioned (just the term I am using not discussing Oracle partition here) so I can partition data from 2011,2012 and 2013 to search first and if the searched data doesn't exists then search the other partition (data from 2003-2010) ?
I'm having difficulty trying to show a list of forms that I would like to present the user after they log on with SSO.
The funny thing is that I can show the user in a message box. However, I cannot filter records that the user should have on an "Application" menu. The application menu is designed to allow the user to launch the form by double clicking on the menu item. That works fine. It is just that I cannot seem to filter. It shows no records.
Here is my WNFI
DECLARE sso_user varchar2(40); nn number; v_vis VARCHAR2(20);
Want to filter a data using CASE statement in WHERE clause for the following scenario.
Need to Filter tb1.fallback_keyword if the fallback_flag is "Y' or 'N' and pg_number is null.Else no partial search of keyword.
where CASE WHEN (fallback_flg = 'Y' OR fallback_flg = 'N') and (pg_number is NULL ) THEN tb1.fallback_keyword = SUBSTR(key_word,1, INSTR(key_word,'#',-2)) ELSE (tb1.keyword = key_word ) AND (tb1.keyword like regexp_replace(key_word, '[*]+', '%')) END
I need to filter records in a datablock based on Yes or No criteria.So i created a listitem(INCLUDE_ZERO_QTY_ITEMS) for that and i am using following code in WHEN-LIST-CHANGED trigger.
BEGIN IF :XGEC_SW_ITEM_LOAD_ITEM_DETS_V.INCLUDE_ZERO_QTY_ITEMS = 'Y' THEN GO_BLOCK ('XGEC_SW_ITEM_LOAD_ITEM_DETS_V'); SET_BLOCK_PROPERTY ('XGEC_SW_ITEM_LOAD_ITEM_DETS_V', default_where, '1=1'); [code]....
I am able to filter the records but the list item is not displaying initial value and the value that i am selecting from poplist.
I have one column name party_name containing Korean Characters and English characters.Some of the English characters have different symbols.My requirement is to get the data and exclude those symbols but not Korean characters.
Already I used a function to replace special symbols with space.The function contains code based on ASCII values it works good but it filters Korean characters too.the attachment of the screenshot, When I double click the name it shows with some question mark.
I get no rows - why? Obviously the predicate 1=2. Except, equally obviously, I don't have that in the query. On checking the objects views I see that ccs.payment method is indeed a table within that schema not a view or anything like that and when checking through another user I can see it has data within.
The "problem" user can see the table exists, just cant ever query rows back. Another user can see the table exists and can get data back.
Like I say, likely a priv or similar issue but I'm damned if I've seen this before, I'd not expect a priv issue to cause a 1=2 filter appear in a plan and its not a view that I can tell.
I'm still digging at my end and this may be irrelevant but when I browse to the table in Sql Developer I can see the columns tab ok, on clicking the "data" tab it throws "ORA-00904: "ORA_ROWSCN": invalid identifier" out. Maybe nothing, maybe related.
Google results suggest that error in SQL Dev is due to implementations of policies/VPD presence on the table.
Sample DateWITH DATA AS ( SELECT 'AAAXXXX IO BLUEEXPRESS' LIST FROM dual UNION ALL SELECT 'BLUEEXPRESS AAAXXXX IO BLUEEXPRESS' FROM dual UNION ALL SELECT 'DDDDD BLUEEXPRESS AAAXXXX' FROM dual UNION ALL SELECT 'DDDDD DDDDD AAAXXXX' FROM dual UNION ALL SELECT 'DDDDD BLUEEXPRESS AAAXXXX NO CARBON' FROM dual UNION ALL SELECT 'NO CARBON [code]....
The above result depends on the following rules:
- Replace BLUEEXPRESS into BEXPRESS - Remove the term NO CARBON (See row no 6) - Reduce all multiple space into single space (see last record).
So far I create separated queries for replacing BLUEEXPRESS into BEXPRESS and replace NOCARBON term but I don't know how to do it in a single shot as well as stuck on scenario to remove multiple spaces and put single space.
As per my req, i need to get the system grants of one user (GRANTEE) using DBMS_OUTPUT API. The requirement get completed using 'SYSTEM_GRANT' as parameter for OPEN function in the metadata api. Please look into part of code which works.
The second set filter doesn't work to get SYS GRANTS of one user. It does not throw any error. Simply the filter doesn't work. 'GRANTEE_EXPR' is not a correct value in the 2nd set filter. What parameter need to pass in object_path_expr ('GRANTEE_EXPR')?
I have a block in the form which is based of a table as data source and so when i query on the form using a execute_query inbuilt statement is fired and all the records in the table behind is retrived and displayed. Also if i need to update any record i can do in on the screen and use commit_form so that all the changes go into the underlying table. Now my problem is when i retrieving my records i want to filter those records based on some conditions to be displayed in the form and not all records to be retrieved. Is it possible to do it if I am using the execute_query inbuilt and my block is based of a table?
I need to filter ticket prices according to the class; i.e.
CASE WHEN booking_class = 'Economy' THEN economy_saver ELSE 0 END AS ECONOMY_SAVER THEN economy_basic ELSE 0 END AS ECONOMY_BASIC THEN economy_basic_plus ELSE 0 END AS ECONOMY_BASIC_PLUSEND, CASE WHEN booking_class = 'Business' THEN business ELSE 0 END AS BUSINESS THEN business_flexible ELSE 0 END AS BUSINESS_FLEXIBLEEND.
..The objective is to show only the prices that belong to the selected class. I am not sure if my sql is correct at this point.
Is it possible to filter each row in a select statement based upon a list that you loop through. For instance in a where clause having an in statement but rather than selecting any value in the in statement looping the main select through each value in the "in" filter.
Eg:
CREATE TABLE TRANSAC( Item_id number , Transaction_Date DATE, Category_id number )
You could then write
SELECT MAX(Transaction_Date) from TRANSAC where category_id = '141'
and then where category_id = '142' then '143' etc.
I understand i could use an inline view instead of a where clause but the issue is that i already have the list of values I want to compare against.
I am using Apex 4.1 and builder theme.I came across this thread to filter the shuttle values based on javascript in dynamic action.Auto filter Shuttle selection list
I created a shuttle and a textbox as described but the dynamic action is not clear. And It is not working for me. The steps are not so clear and i guess the javascript is not complete.
I need to filter a SQL statement with an application item value retrieved from session state. I am assuming I could do this using a Dynamic Action on a Page Load event but I'm not sure where to go from here. How could I append the filter to an existing report page SQL statement?
I am facing very strange situation. In one of my Interactive report, Filter option is not working (Processing symbol is appearing on top of the page, but nothing happens.). Is there any setting or something like that?
I have a question regarding a Date field on one of my form.
How do I make a Date field filter in a descending order when the form is opened? Also, can I add a 'when-mouse-doubleclick' trigger to sort the date field in ascending and descending order (this is a client requirement)?
can i create the user-defined functions and use them in the FILTER clause in the sem_match function? there are some built-in functions for the FILTER clasue. however, only one function (DATATYPE(literal)) support for date/time in the built-in functions. i want to implement some user-defined funcitons in the FILTER clause which can check time intervals in ontology. there are some functions about valid time in the WorkSpace Manager such as WM_OVERLAPS, WM_CONTAINS,WM_MEETS, etc. so, can i write some functions using the these valid time functions in WM and use them in the FILTER clause?
I'm creating Tool Tip definitions for the Operators in the Filter on the Interactive Reports. I was looking for a definition for the 'Contains' operator and from what I've found this operator is used to do a text search and it returns a relevance score for every row selected.
I've also read that in order for that score to be determined that the column(s) need to be indexed with a CONTEXT index. Non of the columns in the tables are indexed with a CONTEXT index, however, when I put a value in the Expression box for a column I get a record returned.
If I run the same query in PL/SQL Developer like: SELECT <column> FROM <table> WHERE contains(<column>,<search text>,1) > 0;
I get an error that the column is not indexed, so how does it work in APEX?
I am working on Oracle forms 10g (Windows 7 OS).I have got one requirement to show one LOV for COLOR table. Say i have three colors BLACK, RED, BLUE in color table. Suppose in a multi record block if a user selects BLACK from a lov for one record then for the next record lov it should show only RED and BLUE. How to filter the COLOR from a LOV record group query which are already selected?
I have a problem with DBMS_DATAPUMP.metadata_filter.Let's suppose that I need to export a huge list of tables (a,b,c,d,e,f,g,h,i...). Let's suppose that the list is dynamic do NOT want to use
DBMS_DATAPUMP.metadata_filter (handle => h1, NAME => 'NAME_EXPR', VALUE => 'IN (''a'', ''b'', ...)', object_type => NULL);
DBMS_DATAPUMP.metadata_filter (handle => h1, NAME => 'NAME_EXPR', VALUE => 'IN (SELECT a.export_object_name FROM my_export_table a, user_objects b WHERE a.export_object_name = b.object_name AND b.object_type = ''TABLE'')', object_type => NULL );
but it results in error.
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA ORA-39125: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS while calling DBMS_METADATA.FETCH_XML_CLOB [] ORA-00942: table or view does not exist
if on an interactive report, you try and filter on a date column, then the "=" operator disappears.You get other (not so useful) operators like "in the next", "not in the next" ">", ">=" etc. - but no "=" to be found.
I have 1M Records coming from an External Data source as a Flat File (using ETL). Now I need only Yesterday's data only to load in my Database Table.
this can be done using Bulk Load and Filter.
write the CODE.
Second Part:-
Hint: if I need to update only those records been updated Say the Address1 field is updated. So this records need to update in my Master Customer Table.
If I have many fields in table and any records that are modified (coming to me from External Datasource as a Flat file) how to identify and update that record in my Master Customer Table?
Upon form load, TList will be populated with predefined item. The behavior i am trying to achieve is to have a text item so user could entered specific text which will then filter the values in TList .
SELECT MAX(fndattdoc.LAST_UPDATE_DATE ) as LAST_UPDATE_DATE, MAX(DECODE(fndcatusg.format,'H', st.short_text,NULL,st.short_text, NULL)) as COMMENTS, MAX(fnddoc.description) as REASON FROM fnd_attachment_functions fndattfn, fnd_doc_category_usages fndcatusg, fnd_documents_vl fnddoc, fnd_attached_documents fndattdoc, fnd_documents_short_text st, fnd_document_categories_tl fl, WSH_NEW_DELIVERIES DLVRY [code]....
I have three tables, I have to merge those three tables, all three tables having same conditions and filter conditions(in each table one filter condition changed), I highlighted in the red difference the filter conditions in each table, finally my result should be 7 columns like
