There is one maintenance job owned by SYSMAN running continuously. I want to stop that scheduler job .How ?
IS this the correct syntax to stop the running job ?
exec dbms_scheduler.stop_job(job_name=>'jobname');
How to stop all jobs(dbms_scheduler) when ever database down or power failure and I need to restart all jobs when ever database is up.
View 3 Replies View RelatedI copied a sqlplus scheduled job procedure. Procedure successfully created .I fount it here [How to Schedule RMAN Daily Backup? [URL]
The procedure is successfully created. Now, doing the following operations:
1) running that job
2) checking whether that job is running or not
3) listing all other jobs
4) unschedule a scheduled job
5) delete a job
6) edit a job
We have a scheduler chain that calls 2 scheduler programs.The chains are controlled by a scheduler job that has job_type as CHAIN.My challenge is how to add email notifications on the failure or success of the programs.
I know about this procedure DBMS_SCHEDULER.ADD_JOB_EMAIL_NOTIFICATION, but this is only applicable to jobs and not programs(i believe). Is there an alternative way to trigger off emails for scheduler programs ?
i want check some data from one process instead of last record
i.e
process data
uuu 1
2
3
4
ppp 1
2
3
4
[code].....
how to stop going to next record if it finds the last record. Because when i click my next button(it is the last record), i try to click my previous or first button but it won't go back, enter-query mode is the error message.
View 9 Replies View RelatedHOW TO STOP THE UPDATE IN PK COLUMN?
View 3 Replies View Relatedthe below issue.
I want to schedule the procedure - SMTP_PROCEDURE2. Which should run every day at 5 PM. The owner of this procedure is 'bkpusr'.
In SYS login. i am running the below script, but it is not working out. what could be the problem.
DECLARE
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'TRIGGERING_THE_SMTP_PROCEDURE',
job_type => 'STORED_PROCEDURE',
job_action => 'BKPUSR.SMTP_PROCEDURE2',
[Code]....
SQLserver in stop condition when i play it. it again stop
View 1 Replies View RelatedI'm trying to install additional Oracle products on my XP VM, but it is telling me to kill all running oracle products. It states that by running the Oracle utility: oradim80 or the Windows NT service Control Panel I can stop all of these services, but I cannot find either.
View 2 Replies View RelatedI have a form with multiple data block. When i want to query and go to next record then this displayed a message "Do you want save changes". But i would like to stop this message(i.e would not see the message) is it possible.
View 3 Replies View RelatedI have master detail datablocks. Master block is course and detail block is trainee. students can schedule their courses in a location at particular time.
lets assume student1 has scheduled course A1 in location LA1 from 9am to 12 pm. Now second student shouldn't be able to schedule same course at same time in same location. He can schedule at different time duration. or else same time duration but different location. Or same time, same location but different course.
so, what i did is, i wrote code in when-validate-record of trainee block to display a message saying " cannot schedule course.choose another time." if he try to insert same time duration or same location .
when i am trying to insert a record with time which is already scheduled and in same location, it displays the message but it is also saving the record. i don't want to save the record.
how should i do this? i tried to give ROLLBACK in this trigger but it doesn't accept. i tried pre-insert trigger also but it is also displaying message but saving the record
my code in when-validate-record is:
declare
cursor c1 is
select start_time,end_time,loc
from trainee
where cname=:course.cname;
[code].......
We are runing (Version: Application Express 4.1.1.00.23)I need to reboot the server.How do I stop APEX gracefully and start it back after?
View 8 Replies View RelatedHow to pass parameter value to a procedure in schedule jobs ?
--procedure :
create or replace procedure updating_temptable(empcode in varchar2) is
begin
update ts_employee_master mas
set mas.last_accessed = sysdate
where mas.employee_code = empcode;
end;
--scheduler
begin
sys.dbms_job.submit(job => :job,
what => 'updating_temptable;',
next_date => to_date('24-04-2012 00:30:00', 'dd-mm-yyyy hh24:mi:ss'),
interval => 'TRUNC(SYSDATE)+1+30/1440');
commit;
end;
/
How to pass employee_code in the procedure[updating_temptable ] in dbms job scheduler ?
why jobs in oracle having problem while dropping them. The problem is like following
If am going to stop some jobs it show the error 'Job not running' and when m trying to drop that job it shows the error 'job is currently running'.
why the Scheduler is not sending out notifications for a job I am running.I set up a small job that calls a programm which references a stored procedure. The procedure executes a manual refresh of a materialized view.
I did set up the SMTP parameters EMAIL_SENDER and EMAIL_SERVER, restarted the instance afterwards and verified that the parameters are set by logging into the Enterprise Manager web console and looking at the page with the email server parameters.
I did verify that the job did actually start and complete successfully by checking the logs in ALL_SCHEDULER_JOB_RUN_DETAILS
I did verify that I actually do have the notifications activated by checking ALL_SCHEDULER_NOTIFICATIONS...There are notifications for all events (JOB_STARTED, JOB_COMPLETED, JOB_SUCCEEDED, JOB_FAILED, etc.) for my job
I also verified that the materialized view has actually been refreshed by checking in ALL_MVIEW_REFRESH_TIMES
I also verified that the email server I am using is sending out emails by sending a test email from the shell using the same sender and recipient addresses as I am using in the notification settings.What could the reason be for the scheduler not sending out emails?
Vehicle 1 Odometer OilLife Drop
18454 85.9% < 1st Oil Change keep
20000 35.9% keep
22781 21.5% keep
25911 89.4% < discard 2nd Oil Change keep
28598 74.1% < discard from data
32365 65.1% < discard from data
46000 45.4% < discard from data
49343 94.4% < discard 3rd Oil Change
Vehile 2 Odometer OilLife..
This shows a drop in oil life. I only want up until the FIRST Oil Change happened. So when the Oil Life drop goes up stop selecting data.
I am trying to create a trigger to stop events from being deleted if the date is before the current date. This is the SQL syntax for my table
CREATE TABLE event
(event_id numeric(5) not null,
concert_id numeric(5) not null,
event_date date,
);
What I have attempted so far is:
CREATE OR REPLACE TRIGGER event_deleting
BEFORE DELETE ON event
FOR EACH ROW
BEGIN
IF DELETING THEN
[code]......
This gives me a few warnings, the first is that a DECLARE is missing and the second is a INTO is missing.
srvctl stop database d devdb1
After that i got this below status .how to make it up Steup by steup procedure
crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.devdb.db application ONLINE ONLINE islr...v345
ora....b1.inst application ONLINE ONLINE islr...v333
ora....b2.inst application ONLINE ONLINE islr...v345
ora....dbap.cs application OFFLINE OFFLINE
[code]...
My oracle version is 11.2.0.2 RAC RDBMS on RHEL 5.6.
At my standby site my physical standby database is on 4 node cluster with all 4 instances up. I need to disable 3,4 instances so that we want it to run on only 1,2 instances.To disable the instances do i need to stop apply(mrp) process. And the apply node is node 1.
We use AIX 6.1 and 10.2.0.4.0 - 64bit. When we create an Job it will be execute as OS User Oracle, but this is not wanted.The file permisions are set as described in Guide to External Jobs on 10g with dbms_scheduler e.g. scripts,batch files
rdbms/admin/externaljob.ora
-rw-r----- 1 root dba rdbms/admin/externaljob.ora
egrep -v '^#|^$' rdbms/admin/externaljob.ora
run_user = nobody
run_group = nobody
bin/extjob
[code].....
We tried different Users in the rdbms/admin/externaljob.ora file but every time the same behavior, the job runs as oracle.
-- Scheduler details
BEGIN
dbms_scheduler.create_schedule(
schedule_name => 'INTERVAL_EVERY_1_MINUTES',
start_date => trunc(sysdate)+18/24,
repeat_interval => 'freq=MINUTELY;interval=1',
comments => 'Runtime: Every day all 1 minutes');
END;-- program code
BEGIN
[code]....
all above three code compiled successfully . but it is not running automatically and not run every 1 minute.
I try to run this manuall by using following code
BEGIN
dbms_scheduler.run_job('JOB_FEED_UK_DATA',TRUE);
END;
It works fine..
create or replace
PROCEDURE LOAD_CUSTOMERS_UK
IS
BEGIN
Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (1,'SMITH','LONDON');
Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (2,'JONES','LONDON');
Insert into CUSTOMERS_UK (ID, NAME, CITY) VALUES (3,'BROWN','BRIGHTON');
[code]....
I have master detail block just consider Forms A as a master and Forms B as a Detail,when my cursor is in form A i try to save the record, it is saved Form A and putting Form B data as null, i have to put a validation to stop this activity, i have to inform the user "Provide values for form B text item",
I created a post block trigger in form A
Begin
If (:FORM-B.TEXT1 is null)l or( :FORM-B.TEXT2 is null)
then
Message( 'provide value for FORM-B');
Message( 'provide value for FORM-B');
raise form_trigger_failure;
ELSE
NULL;
END IF
END;
Im Getting error message and navigation got stopped in last item of form A itself,i need to show error message and cursor control should move to first item of form -B which trigger i have to use for this.
What is the hierarchy to stop and start oracle RAC instance ?
View 10 Replies View RelatedI need to add some kind of tracing in oracle 11g on linux when oracle starts and stops - as at times oracle takes a long time to start.
View 9 Replies View RelatedI'd like to stop Recovery in specific time. For instance ; My db works Day-1 and Every day Recovery starts 20:00 and finish 05:00. If it is possible that when DB time reach to sync 03:00, I'd like to stop recovery.
DB version Oracle 10.2.0.5 .....
I'm uploading data from excel to our database using forms thru webutil. The problem is when I open the same excel file while the upload process is in progress, the uploading stops, BUT not displaying any error. Not even when I chick Help->Show error.
How could I prevent this error and how to trap and display error message?
i want to stop log shipping to standby database. the whole configuration was done by someone else and now i have been ask to stop it. it is done on test bases and now want to stop it.what i have got from internet is as follows:
Alter system set log_archive_dest_2='DEFER';
and i have got the fol error
ORA-32107:failure in updating spfile
ORA-16179:Incremental changes to "Log_archive_dest_2" not allowed
I am having a problem getting to run an Oracle file watcher job successfully. The file watcher starts on schedule and I can see the entries in the DBA_ SCHEDULER_JOB_RUN_DETAILS table. However, I see a status of FAILED with an error 1024. Under additional information I get the following 2 Oracle errors:
ORA-01024: invalid datatype in OCI call
ORA-21560: argument 7 is null, invalid, or out of range
The job is trying to start a stored procedure with one input parameter and signature: PROCEDURE SP_HFU_NTS_FILE_WATCHER_ACTION (p_sfwr SYS.SCHEDULER_FILEWATCHER_RESULT).
I have to fire "EXPORT BACKUP COMMAND" depend on the EOD Process.
ie:
1) We have a EOD Process, which would be completing between 8pm to 6am.
2) After this EOD process, we have to take EXPORT Backup.
3) The above mentioned steps are being done manually.
Now i want to make them automated:
4) ie if the EOD process completed between the mentioned time. then Export command should be run, otherwise should not happen.
