I had a question with regards to the reset of sequence in DB.
From what I had know, there are 2 ways of reseting it...
1. Alter Sequence method
2. Drop and Create Sequence method.
It seems to me (from what I find online )that Alter method is much preferred. Why is this so? Is there any impact using Drop and Create Sequence method?
In oracle is it possible to find if a sequence was reset? I know my sequence was reset, looking at the nextval of my sequence, but is there an oracle log or anything which proves that sequence was reset ?
View 2 Replies View Related I have Follwoing Table and data.
CREATE TABLE ABC(DPT_NUM NUMBER,LOT_NUM NUMBER);
Insert into ABC(DPT_NUM, LOT_NUM, SRL_NUM) Values (1, 501, 1);
Insert into ABC(DPT_NUM, LOT_NUM, SRL_NUM) Values (1, 502, 2);
Insert into ABC(DPT_NUM, LOT_NUM, SRL_NUM) Values (1, 509, 3);
Insert into ABC(DPT_NUM, LOT_NUM, SRL_NUM) Values (1, 511, 4);
Insert into ABC(DPT_NUM, LOT_NUM, SRL_NUM) Values (1, 503, 5);
[Code]...
I write Following query.
SELECT DPT_NUM,LOT_NUM,ROW_NUMBER() OVER(PARTITION BY DPT_NUM ORDER BY DPT_NUM) SRL_NUM FROM ABC;
Result is
DPT_NUMLOT_NUMSRL_NUM
15011
15022
15093
15114
15035
15166
15227
15698
[Code]...
But i want to reset rownum after each 4. Mean after serial number 4 , serail number must start from 1. I want to reset serial number after each 4 records (lot_num) against dpt_num;
[#|2010-03-17T19:00:26.689+0530|SEVERE|glassfishv3.0|tcplistener.ModuleHandler|_ThreadID=30;_ThreadName=Thread-1;|The log message is null.
java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at java.net.SocketInputStream.read(SocketInputStream.java:182)
at java.io.FilterInputStream.read(FilterInputStream.java:66)
at tcplistener.ByteWrapper.unwrapFromStream(ByteWrapper.java:136)
at tcplistener.ModuleHandler.run(ModuleHandler.java:106)
at java.lang.Thread.run(Thread.java:619)
|#]
[code].....
Srl no - Srl no w.r. to the date of transaction.i.e will be incremented for every day and should again reset for the next day-Length -4 Purpose code -Purpose code of the transaction.
View 8 Replies View RelatedJust trying to figure out a way to reset a lost sys password.The Customer has a database that were configured by the application provider.They were however kicked out and did not leave any kind of documentation behind
they also configured the passwordfile to disable OS (oracle) user to login to the DB.Is it possible to change the password file with orapwd to set a new password for the sys user?I some how recall that it can only be done if the passwordfile is set to exclusive and not as in this case set to shared.
I often use "alter session set xxx=xxx;" command to change parameter value temporarily. After that, how to reset parameter value to default and I don't want logout sqlplus.
View 3 Replies View RelatedI need to reset the line number for each header values.
create table header_table(header_value varchar2(100));
create table line_table(header_value varchar2(100), line_number number);
insert into header_table values('ALAOF');
[Code]....
But My line table output looks like below
LINE TABLE:
header value line_number
ALAOF 1
ALAOF 2
ALAOF 3
[Code].....
I have a java application (jdk 6) that use a db oracle 11g with ojdbc6.jar version 11.2.0.1.0 on linux.
Sometimes (one or two cases on 11k sql insert on table in one day) I obtain, the error:
java.sql.SQLRecoverableException I/O Error: Connection reset
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:866)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1145)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1259)
oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1469)
oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.ja
va:389)
...
Account XYZ has expired and we don't know the password of account xyz and don't want reset the password also. How can open account XYZ without change the password?
View 1 Replies View RelatedI have an Oracle 9i developer database on my Windows workstation. I havent used it in a couple weeks and forgot my Sysdba login password. how I can reset it or get into the database?
View 6 Replies View RelatedI have developed an application Customer Call Handling where the main form of the Application has about 42(Data & Control) Blocks, many canvases and windows.This main form Calls many other forms which all work fine. But whenever this Main form is Cleared,Queried it calls the Code gems_ proc_ clear which has CLEAR_FORM(NO_VALIDATE).Immediately after the Clear_form(no_validate) is fired it throws this error FRM-92100.
On Save too, the form needs to be cleared once data is saved. The save works fine. but when the call to gems_proc_clear is made after save it throws the error again.
Since its the main form of the application, The Call Center users are having difficulty Clearing or Querying the form.
The forms have been developed in Forms 6i Version and work absolutely fine in 6i Test-Server Environment. But the moment we run the Forms in the Live Server(Oracle 11G) Environment when the form is Cleared,Queried this error throws.
How to reset the status of Refresh Group?
In our database, it is showing the status of Refresh group to 'Broken'.
I have created table and i am using sequence to increment primary key value.
Now i need to delete the table content and reset primary key to 1 using store procedure.
10.2.0.3 on Linux
I reset a user password and the user is unable to login as you can see below
[oracle@testdb 10.2.0]$ sqlplus sys/manager as sysdba
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Nov 27 16:20:21 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options
SQL> alter user sysman identified by oracle;
User altered.
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production With the Partitioning, OLAP and Data Mining options
[oracle@testdb 10.2.0]$ sqlplus sysman/oracle
SQL*Plus: Release 10.2.0.3.0 - Production on Tue Nov 27 16:20:32 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
ERROR: ORA-01017: invalid username/password; logon denied
User unable to login even after password reset
We have a production database on 11.2.0.2 version. The application user was prompted to change the password after his password expired.
USERID NTIMESTAMP# ACTION# RETURNCODE
------------------------------ --------------------------------------------------------------------------- ---------- ----------
M500796 13-DEC-11 06.11.06.065209 PM 100 28001
After changing the password he is not able to logon. The aud$ table does not show any occurrence of 1017, therefore it is not a question of Invalid password.
LVV> show parameter SEC_CASE_SENSITIVE_LOGON
NAME TYPE VALUE
------------------------------------ ----------- ------------------------------
sec_case_sensitive_logon boolean FALSE
I'm trying to write short program to reset password on databases. I'm trying to use OCINewPassword property with following
public void ResetPassword(String sOldPass, String sNewPass) {
this.sCurrent = sOldPass;
this.sNewPassword = sNewPass;
Properties props;
Connection conn = null;
[code]....
I cannot remember my password to access an existing database in Application Express. I tried entering my password 3 times, but the system does not provide a status other than 'Invalid Login Credentials'.
I am going to assume that 3 times is limit before you have to reset the password or from what I see reinstall. When selecting reset, the system asks for an email address that was never established in the system. How can I reset my password without uninstalling and reinstalling Oracle 11g XE?
WHAT IS INCARNATION BACKUP......IS IT COMPULSORY TO TAKE AFTER OPEN RESETLOGS.....WHAT WILL HAPPEN IF WE TAKE INCARNATION BACKUP..........
View 1 Replies View RelatedWe have 2 apex schemas
APEX_030000
APEX_040200
Before executing the apxchpwd.sql, found the "alter session command" sets schema to APEX_030000. So we changed that to APEX_040200. Then we executed the sql script. It executed fine.
But now when we try to login to apex, and pressing enter after providing the username/pwd, it raises the following exception
Error Error in PLSQL code raised during plug-in processing.
ORA-06508: PL/SQL: could not find program unit being called
I have a series of cascading LOVs, A, B, C, D, E.
These select values for a tabular form. My problems:
1. Select on A does not always clear C, but does clear B, D and E.
2. Select on B does not "stick" after the first selection. That is, I can select a value once, then all subsequent selections reset themselves to that first selection, or, to NULL (there are a few flavors of this)
I do not have any Dynamic Actions on the page, other than what is in the cascading LOVs.
Debug is not listing anything to notice - as i suspected would be the case. The issue has to be with JS somewhere, but I do not know how to track it or fix it, short of deleting these items and rebuilding them.
I have copied these items from one page to another.
I would think that once I update all of the cascading LOV settings, the underlying JS would get updated as well.
We have faced database(10.2.0) issue cause incomplete recovery and have performed open resetlogs. This DB is of 12Tb. In 10g opening database with reset logs do not invalidate previous backups. we have another replica(no reset state)of this database which we sync using archives.how we can apply those archives(reset database)to previous database?
View 7 Replies View Relatedi try to startup a database, and get that obsolete/deprecated parameter specified(ORA-32004: obsolete and/or deprecated parameter(s) specified)so i try to reset the parameter, but it seems it is already reset(not in spfile), so maybe this is in memory. SO now i try to reset with scope = memory or both, it gives this error(ORA-32029: resetting with SCOPE=MEMORY or SCOPE=BOTH is currently not supported).
what to do, because now i cannot reset with scope = memory and in spfile it is not there but still it comes in deprecated parameter.
I have a Sap Primry Database and also a standby db that was working perfectly.. We migrated the primary db from windows 2003 to windows 2008 and brought the primary db up.. I had to create a controlfile and do a system copy and had to reset the logs on the Primary.. All came up and when i checked the standby it was receiving the logs but after a month. i see that it was not applying the logs as I think because of the sequence number .. it stopped.
I did the ffg as per the attachement...My logs have been shipped across but not applied, But What worrries me is the log sequence number on my Primary
SQL> select max(sequence#),thread# from gv$archived_log group by thread#;
MAX(SEQUENCE#) THREAD#
-------------- ----------
27727 1
I have created a IR report and I set the default search column using the suggestion found in the thread URL....but how can I keep this default even after the research was done?Now it is resetted !
View 1 Replies View RelatedDatabase Version - 10.2.0.4.0
OS - Red Hat Linux
We have configured oracle one way stream between two databases. Source database is capturing the changes (No downstream configured). Configuration was working fine but destination database was lagging behind very much i.e about 15 days behind the source database. We are ok with this but the problem is now that , as per client request we have restored previous backup and open the database with resetlog option in source database. After resetlog , archivelog sequence has been changed and stream is not working.
Can I apply the previous archivelog (before resetlog archivelogs ) in destination database anyway.Source database is a production database.
I want to reset my date to this format: 12/31/2012 11:59:59 PM - see code below:
DECLARE
v_latest_close DATE;
BEGIN
v_latest_close := TO_DATE ('12/31/2012 23:59:59 ','MM/DD/YYYY HH24:MI:SS');
DBMS_OUTPUT.PUT_LINE('The new date format is : '|| v_latest_close);
END;
the code above displays only : 12/31/2012 instead of 12/31/2012 11:59:59 PM
Need to create a report based on date ranges and for this created a interactive report and two page item datepicker fields P15_fromdate and p15_todate. Report works fine with this criteria.But user wants one more field quarter(P15_quarter), When they select the quarter the range values has to get reset and as to get applied to report.
Issue here is unable to find a way to set the page range item values based on the quarter field selection
how to reset the page item fields.
How do I get a query of each sequence and who has the permissions to it?
View 1 Replies View RelatedI have created a trigger for after insert which updates a table when there is a row inserted in that table. The update is on a column which stores the application description along with the sequence number. Now my requirement is that sequence number should be unique only with in an application but not with in the table.Say the row entry can be as follows:
App_Desc Request_ID
-----------------------
DEV 100 1
DEV 101 2
STG 100 3
STG 101 4
Here Request_ID is unique But the sequqnce thats created for DEV (100,101) should take an entry of 102 for the next entry for DEV and same applies for STG. So I have to use the same sequqnce for all the application.