We have faced database(10.2.0) issue cause incomplete recovery and have performed open resetlogs. This DB is of 12Tb. In 10g opening database with reset logs do not invalidate previous backups. we have another replica(no reset state)of this database which we sync using archives.how we can apply those archives(reset database)to previous database?
View 7 RepliesQuestion: does oracle recover past the scn mentioned in the control file or do you need recover using backup control file for it? No specific scn,time specified.
Scenario: Restore database on new server + copy archivelogs from original to minimize data loss.
Backup : 5 AM
Archivelogs: 7 AM
New server:
Configure dummy instance
Restore spfile from tape
Restore controlfile from tape: SCN 5AM
Restore database (no scn specified) from tape: : SCN 5AM
Copy archivelogs from old server to archivelog new location: SCN 7AM.
Recover database
open database -> SCN 5AM or 7AM?
Does it recover till SCN 5AM (controlfile) or SCN 7AM (latest scn in copied archivelog)
We have lost some datafiles and some archivelogs. We have backup of whole database taken on Dec 20 and archivelogs until Dec 23.So we dont have 1 day worth of archivelogs which can lead to incomplete recovery.
Now question is do we need to restore all datafiles or only lost datafiles for incomplete recovery since we dont have all archivelogs ? lost datafiles belong to different tablespaces.
Datafiles which are still intact are with current SCN and we restore lost datafiles only and recover unitl our last available archivelog it will have different SCN. Will we be able to open database or we need to resotre whole database for this scenario?
I have the following situation: a customer sent me a group of files, that he said to be a "backup" of an old database, that is no longer online (he doesn´t use our software anymore). However, he needs to recover the data in this database. The person at the company who generate these files doesn´t work there anymore, so we don´t have any of the following information:
- Database version, connection details, service names, user names neither tablespace names.
We were just told that these files were recorded in a DVD, and is que only source remaining.
The files he sent are the following:
ctrlcf_satp_01.ctl
ctrlcf_satp_02.ctl
ctrlcf_satp_03.ctl
daddf_satp_dad_01.dbf
[code]......
Is there a way to access this data? Or can I tell our costumer that your data is lost forever..
Currently my DB is running on 10g Archivelog mode. All the archive logs being generated at /u04/dbarch/.The server crashed yesterday. Now when I want to start my instance it throwing the error ORA-01110 and ORA-01113-- system01.dbf need more recovery.The below are the command I fired from sql prompt:-
SQL>STARTUP MOUNT;
SQL>RECOVER DATABASE UNTIL CANCEL;
But still oracle suggesting that system01.dbf need more recovery.
how can I recover my database.
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies View Relatedmultiple disk failure, the database was open at the time.We have managed to recover the data from the disk and have put it on another disk.We have got a new server with oracle 9 running.
A blank database has been created.I have copied the control files and redo files onto the new server and left the datafiles , (.dbf,.ora) on a seperate external disk F drive (this is because the original database resided on F drive)I can mount the database , however when I try to open it I get the following
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'F:ORACLEORADATALCMPROSYSTEM01.DBF'
ORA-01207: file is more recent than controlfile - old controlfile
What is difference between the flashback database(10g later) and incomplete recover?
View 5 Replies View RelatedI am doing some test, seeking your expert opinion.I have a database and have the following backup strategy.
1) Database running in archive log mode.
2) First I backup all the table space excluding one tablespace 'DP_TS_LOB'.
RMAN> CONFIGURE EXCLUDE FOR TABLESPACE 'DP_TS_LOBS';
RMAN> BACKUP DATABASE;
3) I take a separate Backup of DP_TS_LOB tablespace.
RMAN> BACKUP TABLESPACE DP_TS_LOB;
4) I backup all the archived redo logs.
RMAN> SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
RMAN> backup archivelog all delete input;
Now I wanted to restore the database from the backup excluding the DP_TS_LOB and bring it up and running. DP_TS_LOB is huge and used only on certain work flows. I don't want the database to be down until we restore DP_TS_LOB. I wanted to restore all the other tablespace and bring the database up operational and restore and recover the DP_TS_LOB tablespace datafile's in background taking the datafiles of DP_TS_LOB tablespace offline.I tried the following but unsuccessful.
RMAN> restore controlfile to 'g:ctl_bckctl_01' from autobackup;
RMAN> restore spfile to 'g:ctl_bckspfile' from autobackup;
RMAN> sql "create PFILE = ''G:ctl_bckPFILE'' from SPFILE = ''G:ctl_bckSPFILE''";
Update the new parameter with new control file name. Copied the control file and parameter file to corresponding location.
RMAN> startup nomount pfile=D:appdivaproduct11.1.0db_1databasepfile;
RMAN> restore database skip tablespace 'dp_ts_lob';
RMAN> alter database mount;
RMAN> sql 'alter database datafile 8 offline'; ==> datafile of DP_TS_LOB tablespace.
First I assumed "Recover Database" will only recover online database files. But got the following error.
RMAN> recover database;
Starting recover at 27-JUL-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2011 18:23:03
RMAN-06094: datafile 8 must be restored
Then I tried recovering data file separately, but same error.
RMAN> recover datafile 1;
Starting recover at 27-JUL-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2011 18:24:30
RMAN-06067: RECOVER DATABASE required with a backup or created control file
can we recover a dropped table from database as well as recyclebin.
View 13 Replies View RelatedI am trying to create my database on a new server using rman incremental hot backups.
I have already restored and recovered my level 0 database on new server, but i am not able to restore/recover the level 1 backup on the new server. I have transported level 1 backup irom the old server to the new one. Do i need to recover lvl 1 bkp only or restore it also.
Can you take an incremental backup level 1 or level 0 without archivelogs?
syntax would bebackup as compressed backupset cummulative level 1 database.
The reason I ask is because when I run backup as compressed backupset cummulative level 1 database plus archivelogs # it runs fine, but when I run backup as compressed backupset cummulative level 1 database it just hangs.
I'm in the process of testing a restore/recover from a simulated full system and media loss. A level 0 backup was taken from the server, and I'm trying to restore/recover to a point in time on a second server. I have created the database (with the same name) and have been able to successfully restore both the controlfile and spfile from the autobackup.
how does RMAN treat the "set until time"? The level 0 was taken on a database/server that is in CST while the database I'm trying to do a restore/ recover to is in EST. So when trying to do a point in time recovery, should I specify the time in EST or CST?
How to recover a table which truncate incautiously?
View 7 Replies View RelatedOne of our programmer/user accidentally truncated 2 tables in production. The dB is in NO ARCHIVELOG MODE.
How can we restore records of the 2 tables?
My server hard disc crashed yesterday and i don't have any backups.
I am able to recover the .dbf files by using a recovery tool.
is it possible to use this .dbf files into new server and recover my data.
How i can recover my drop table..i use user managed backup concept after dropping table i cant recover my table..how i use step that my dropped table recover.
View 12 Replies View Relatedhow to take backup and recover of oracle database and which method is best for to protect our data from lost
View 3 Replies View RelatedOur client has this scenario:May 23th 4:00 PM a user truncate a critical table. The customer need to recover the data before truncate.
The recover materials list like this:
1. A cold backup of this database at May 1th.
2. The archive log except May 1th ~ May 15th.
3. Every day exp at 00:30 and 12:00.
Is there any way to recover the data before truncate table with these material?
My scenario is use RMAN to restore and recover database to a new host.The structure of two hosts are same.
In Host A:
1. Take a full backup.
2. Import a schema which has 191 tables in order to generate archivelogs.
In Host B:
I put all the folders(backupset, autobackup, archivelog) to the same directory. But after recovered the database, i checked that schema just has 175 tables, the latest few tables are missing.
how i can recover my drop table using until time in rman scenario.
View 3 Replies View RelatedHow many times i can do recover (TSPITR) a tablespace ? While trying to recover tspitr tablespace on 2nd time i got error message ORA-01178 file 13 created before last create controlfile,but first time it was success.
View 1 Replies View Relatedi need to restore one dropped table which i mistakenly deleted from my UAT Server. My flashback was off also. How to recover the lost table by RMAN.
View 8 Replies View Related Imagine this situation
Current time :05 Apr 2011
I have to perform the TSPITR of a tablespace to recover it to a time 03-apr-2011 5 pm.Now I have done that.
Now I find that I need to actually recover it ti 04-apr-2011.Can I again recover the tablespace to 04-Apr after recovering it to 03-Apr by mistake I am not usng recovery catalog;
I delete some of the data from a table unfortunately and make commit on that on my production server.
getting back my all data of this table only of last 15 minutes.
I have a database for which I use RMAN for backup & recovery. The database is in archivelog mode. Online redo log files are multiplexed and I have more than one destinations for archive logs. If, due to a disk crash, all data files and redo log files are gone - and I have archive logs, one member of each redo log group and a full database backup available, I can recover till the last archived log. But I want to ask that what about the transactions which were not archived at the time of media failure? How can I recover committed transactions which were not archived at the time of crash, and I have a mirrored copy of log group which was current at the time of failure?
View 5 Replies View RelatedI have facing problem while taking backup on Windows 7 client of Oracle 11g R2 database. I have installed oracle 11gR2 for windows on windows 7 machine. I have created a directory like below in database.
On Database Server
SQL> create directory win_expdp_dir as 'd:expimp';
Directory created.
SQL> grant read, write on directory win_expdp_dir to lab;
Grant succeeded.
On Windows 7 machine (client machine)
D:appproduct11.2.0client_1BIN>expdp lab/lab@wbdata.wbh-db11g DIRECTORY=win_expdp_dir DUMPFILE=lab.dmp LOGFILE=lab.log
Export: Release 11.2.0.1.0 - Production on Mon May 2 12:51:44 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
I have give all sharing rights on d:expimp directory. My main question is why i'm getting this error. Is there any thing missing in setup. how to take export on windows 7 client.
I've read a lot about the different types of backup available with Oracle (hot and cold backup). However, I was thinking of a different way of performing this task. I'm currently using Windows Server 2008 R2 and Oracle 11g Standard Edition. I'd like to schedule an entire backup of my server via the utility "Windows Server Backup" (available for free).That way, I could recover my entire server with all the programs and files in case the latter crashes.I'm wondering if this solution could be used as a way of backing up (and recovering) the Oracle database. Should I still set up a regular hot backup with the Archivelog mode enabled in case some operations/transactions were being done at the time of the crash (for the data integrity)?
View 2 Replies View RelatedI have an oracle 8i recovery scenario. I have database cold backups of MONDAY and WEDNESDAY evenings. backup contains control files, data files, redo files
Database runs in Archive log mode and all archives of the month are available. Hard disk crashed on SATURDAY
all archive logs are still available at different location. Control files are not backed up to trace or file name or automatically means no backup control file (except ones in cold backups described above)
restoring all files from cold backup of either MONDAY or WEDNESDAY (I recovered to Wednesday) leaves nothing to recover. Querying V$RECOVER_FILE returns nothing. All log sequences higher to the number nnn displayed as result of ARCHIVE LOG LIST are present at correct location in correct format
My question is how do i ROLL Forward the Database from WEDNESDAY to SATURDAY in the above scenario.
i have one question regarding archivelog and backup if i take just backup excluding archivelogs like = RMAN>backup database; (not plus archivelog ) now when even i recover database using backup , will it also recover changes that was in archives?
View 7 Replies View Related