Backup & Recovery :: Missing Some Tables After Recover To A New Host
Oct 20, 2011
My scenario is use RMAN to restore and recover database to a new host.The structure of two hosts are same.
In Host A:
1. Take a full backup.
2. Import a schema which has 191 tables in order to generate archivelogs.
In Host B:
I put all the folders(backupset, autobackup, archivelog) to the same directory. But after recovered the database, i checked that schema just has 175 tables, the latest few tables are missing.
View 5 Replies
ADVERTISEMENT
Jul 20, 2012
Backgroud info:
host server crashed.
Database was not cleanly shutdown.
Database is not in archivelog mode.
Datafiles were saved.
My goal:I want to recover the database based on the available files.
My approach:
Install new database.
ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
shutdown database.
Place available dbf files in the location for new database, replacing existing files.
edit trace file to create new controlfile. Script is:
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "newdatabase" RESETLOGS NOARCHIVELOG
MAXLOGFILES 16
MAXLOGMEMBERS 3
MAXDATAFILES 100
MAXINSTANCES 8
MAXLOGHISTORY 292
[code]....
View 12 Replies
View Related
Jan 31, 2011
I am trying to create my database on a new server using rman incremental hot backups.
I have already restored and recovered my level 0 database on new server, but i am not able to restore/recover the level 1 backup on the new server. I have transported level 1 backup irom the old server to the new one. Do i need to recover lvl 1 bkp only or restore it also.
View 1 Replies
View Related
May 15, 2011
I'm in the process of testing a restore/recover from a simulated full system and media loss. A level 0 backup was taken from the server, and I'm trying to restore/recover to a point in time on a second server. I have created the database (with the same name) and have been able to successfully restore both the controlfile and spfile from the autobackup.
how does RMAN treat the "set until time"? The level 0 was taken on a database/server that is in CST while the database I'm trying to do a restore/ recover to is in EST. So when trying to do a point in time recovery, should I specify the time in EST or CST?
View 2 Replies
View Related
Jun 27, 2012
I have backup my database,and i want to create a new database in a new host using the backupset?
View 3 Replies
View Related
Feb 10, 2011
I want to do the recovery of my database using the archive log files but one of the archive log in between is missing,
View 17 Replies
View Related
Jun 11, 2012
How to recover a table which truncate incautiously?
View 7 Replies
View Related
Apr 20, 2011
One of our programmer/user accidentally truncated 2 tables in production. The dB is in NO ARCHIVELOG MODE.
How can we restore records of the 2 tables?
View 9 Replies
View Related
Oct 15, 2013
I have the following situation: a customer sent me a group of files, that he said to be a "backup" of an old database, that is no longer online (he doesn´t use our software anymore). However, he needs to recover the data in this database. The person at the company who generate these files doesn´t work there anymore, so we don´t have any of the following information:
- Database version, connection details, service names, user names neither tablespace names.
We were just told that these files were recorded in a DVD, and is que only source remaining.
The files he sent are the following:
ctrlcf_satp_01.ctl
ctrlcf_satp_02.ctl
ctrlcf_satp_03.ctl
daddf_satp_dad_01.dbf
[code]......
Is there a way to access this data? Or can I tell our costumer that your data is lost forever..
View 4 Replies
View Related
Feb 24, 2013
My server hard disc crashed yesterday and i don't have any backups.
I am able to recover the .dbf files by using a recovery tool.
is it possible to use this .dbf files into new server and recover my data.
View 5 Replies
View Related
Feb 10, 2011
Currently my DB is running on 10g Archivelog mode. All the archive logs being generated at /u04/dbarch/.The server crashed yesterday. Now when I want to start my instance it throwing the error ORA-01110 and ORA-01113-- system01.dbf need more recovery.The below are the command I fired from sql prompt:-
SQL>STARTUP MOUNT;
SQL>RECOVER DATABASE UNTIL CANCEL;
But still oracle suggesting that system01.dbf need more recovery.
how can I recover my database.
View 5 Replies
View Related
Dec 29, 2011
How i can recover my drop table..i use user managed backup concept after dropping table i cant recover my table..how i use step that my dropped table recover.
View 12 Replies
View Related
Jan 9, 2013
how to take backup and recover of oracle database and which method is best for to protect our data from lost
View 3 Replies
View Related
May 24, 2012
Our client has this scenario:May 23th 4:00 PM a user truncate a critical table. The customer need to recover the data before truncate.
The recover materials list like this:
1. A cold backup of this database at May 1th.
2. The archive log except May 1th ~ May 15th.
3. Every day exp at 00:30 and 12:00.
Is there any way to recover the data before truncate table with these material?
View 3 Replies
View Related
Jan 3, 2012
how i can recover my drop table using until time in rman scenario.
View 3 Replies
View Related
Feb 7, 2011
How many times i can do recover (TSPITR) a tablespace ? While trying to recover tspitr tablespace on 2nd time i got error message ORA-01178 file 13 created before last create controlfile,but first time it was success.
View 1 Replies
View Related
May 4, 2011
multiple disk failure, the database was open at the time.We have managed to recover the data from the disk and have put it on another disk.We have got a new server with oracle 9 running.
A blank database has been created.I have copied the control files and redo files onto the new server and left the datafiles , (.dbf,.ora) on a seperate external disk F drive (this is because the original database resided on F drive)I can mount the database , however when I try to open it I get the following
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'F:ORACLEORADATALCMPROSYSTEM01.DBF'
ORA-01207: file is more recent than controlfile - old controlfile
View 25 Replies
View Related
Jul 7, 2011
i need to restore one dropped table which i mistakenly deleted from my UAT Server. My flashback was off also. How to recover the lost table by RMAN.
View 8 Replies
View Related
Aug 25, 2011
I take a backup on PROD and want to use that backup on test to duplicate the PROD db.I ran this first on PROD:
catalog rman11cv/password@metarep
connect target /
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'G:
estore\%U';
BACKUP DATABASE PLUS ARCHIVELOG;
I runs fine.map the network drive on my TEST machine. I run the script:
connect target sys/password@pdm;
connect auxiliary /;
run {
allocate auxiliary channel 'ch1' type disk;
SET NEWNAME FOR DATAFILE 1 TO 'D:oracleoradatadatabasedataSYSTEM01.DBF';
SET NEWNAME FOR DATAFILE 2 TO 'D:oracleoradatadatabasedataUNDOTBS01.DBF';
SET NEWNAME FOR DATAFILE 3 TO 'D:oracleoradatadatabasedataCWMLITE01.DBF';
[code]....
Its trying to read from the right backupset.But Im not sure it can see it:
channel ch1: reading from backup piece G:RESTOREN3MKSOMQ_1_1
ORA-19870: error reading backup piece G:RESTOREN3MKSOMQ_1_1
ORA-19505: failed to identify file "G:RESTOREN3MKSOMQ_1_1"
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.failover to previous backup
Net view of the PROD host gives this:
D:oracleadminduplicatePDMTEST>net view myprod
Shared resources at myprod
Share name Type Used as Comment
------------------------------------------------------
restore Disk G:
The command completed successfully.
View 8 Replies
View Related
Jul 23, 2012
What is difference between the flashback database(10g later) and incomplete recover?
View 5 Replies
View Related
Jan 24, 2011
We have faced database(10.2.0) issue cause incomplete recovery and have performed open resetlogs. This DB is of 12Tb. In 10g opening database with reset logs do not invalidate previous backups. we have another replica(no reset state)of this database which we sync using archives.how we can apply those archives(reset database)to previous database?
View 7 Replies
View Related
Apr 5, 2011
Imagine this situation
Current time :05 Apr 2011
I have to perform the TSPITR of a tablespace to recover it to a time 03-apr-2011 5 pm.Now I have done that.
Now I find that I need to actually recover it ti 04-apr-2011.Can I again recover the tablespace to 04-Apr after recovering it to 03-Apr by mistake I am not usng recovery catalog;
View 13 Replies
View Related
Mar 23, 2012
I delete some of the data from a table unfortunately and make commit on that on my production server.
getting back my all data of this table only of last 15 minutes.
View 6 Replies
View Related
Jul 27, 2011
I am doing some test, seeking your expert opinion.I have a database and have the following backup strategy.
1) Database running in archive log mode.
2) First I backup all the table space excluding one tablespace 'DP_TS_LOB'.
RMAN> CONFIGURE EXCLUDE FOR TABLESPACE 'DP_TS_LOBS';
RMAN> BACKUP DATABASE;
3) I take a separate Backup of DP_TS_LOB tablespace.
RMAN> BACKUP TABLESPACE DP_TS_LOB;
4) I backup all the archived redo logs.
RMAN> SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
RMAN> backup archivelog all delete input;
Now I wanted to restore the database from the backup excluding the DP_TS_LOB and bring it up and running. DP_TS_LOB is huge and used only on certain work flows. I don't want the database to be down until we restore DP_TS_LOB. I wanted to restore all the other tablespace and bring the database up operational and restore and recover the DP_TS_LOB tablespace datafile's in background taking the datafiles of DP_TS_LOB tablespace offline.I tried the following but unsuccessful.
RMAN> restore controlfile to 'g:ctl_bckctl_01' from autobackup;
RMAN> restore spfile to 'g:ctl_bckspfile' from autobackup;
RMAN> sql "create PFILE = ''G:ctl_bckPFILE'' from SPFILE = ''G:ctl_bckSPFILE''";
Update the new parameter with new control file name. Copied the control file and parameter file to corresponding location.
RMAN> startup nomount pfile=D:appdivaproduct11.1.0db_1databasepfile;
RMAN> restore database skip tablespace 'dp_ts_lob';
RMAN> alter database mount;
RMAN> sql 'alter database datafile 8 offline'; ==> datafile of DP_TS_LOB tablespace.
First I assumed "Recover Database" will only recover online database files. But got the following error.
RMAN> recover database;
Starting recover at 27-JUL-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2011 18:23:03
RMAN-06094: datafile 8 must be restored
Then I tried recovering data file separately, but same error.
RMAN> recover datafile 1;
Starting recover at 27-JUL-11
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 07/27/2011 18:24:30
RMAN-06067: RECOVER DATABASE required with a backup or created control file
View 4 Replies
View Related
Sep 23, 2011
can we recover a dropped table from database as well as recyclebin.
View 13 Replies
View Related
Jan 26, 2012
I have a database for which I use RMAN for backup & recovery. The database is in archivelog mode. Online redo log files are multiplexed and I have more than one destinations for archive logs. If, due to a disk crash, all data files and redo log files are gone - and I have archive logs, one member of each redo log group and a full database backup available, I can recover till the last archived log. But I want to ask that what about the transactions which were not archived at the time of media failure? How can I recover committed transactions which were not archived at the time of crash, and I have a mirrored copy of log group which was current at the time of failure?
View 5 Replies
View Related
Oct 7, 2012
We have a nightly rman backup that was complete and clean.The backup contains a Data File, Control File and a backup Archive Log file.The database server crashed with all the subsequent archive logs lost.
We are trying to recover from the three backup files.We are bumping into the backup piece missing as all the archive logs are done. how to restore with the exising backup files. the lost archive logs are probably salvageable.
View 9 Replies
View Related
Oct 14, 2013
I've a little question : Is it possible to use RMMAN to backup 2 tables incrementally ? I don't want to backup all the database but only these 2 tables.
View 4 Replies
View Related
May 28, 2013
In one of my table i found some rows missing, how can i recover it ?????
View 4 Replies
View Related
Feb 23, 2011
Currently my Source Database capture state stream is "Waiting for Dictionary Redo FIRST SCN" some logfiles are missing. My problem now is how to recover those missing logfiles.
View 1 Replies
View Related
