Within each DeptID group I need to calculate absolute change of 'Count' column between previous and current months and compare change value with threshold.
If ratio >= threshold N number of times I need to make a note of that event. Threshold = 0.1 N = 2 - alert needs to exceed threshold two consequtive times
Here is data processing algorithm:
1. Calculate change between month 2010-04 and 2010-05: abs((1134/1392 - 1))= 0.18;
2. check change value against threshold: 0.18 > 0.1
3. Threshold was exceeded, set alert_fired_cnt counter to = 1
4. Once alert fired it creates a baseline for comparison - I need to use Count from month 2010-04: We're now in month 2010-06: abs(1094 / 1392 - 1)=0.21
5. check change value against threshold: 0.21 > 0.1
6. Threshold was exceeded, increment alert_fired_cnt counter by 1 = 2
7. At this point alert exceede threshold two times, I need to set a alert_triggered flag = 1 and reset alert_fired_cnt = 0 for further calculations
8. We're in montn 2010-07: abs(1333/1294-1)=0.03
8. check change value against threshold: 0.03 < 0.1
9. Since threshold was not exceeded, keep alert_fired_cnt counter to = 0
Above algorithm needs to be run for all DeptID groups.
I load above data into an associative array and loop through elements. I am having trouble keeping computations within each DeptID group.
A non-zero payment indicates that the account was open on that date. A zero payment indicates that the account is closed and assumes that it was open since Jan-01.
AAA: code 00 was open in February, so it was open for 11 months (Feb-Dec) code 01 was open in August, so it was open for 5 months (Aug-Dec) So the result should be 11
BBB: 00 - closed in February, existed for 1 month 01 - open in August, existed for 5 months Result should be 6.
CCC: 00 - 11 months(Feb to Dec) 01 - 7 months (Jan to Aug) Result: 12 months
Need to get: AAA 11 BBB 6 CCC 12
Here is the source table:
SELECT 'AAA' SSN, '00' CODE, '01-FEB-89' RECORD_DATE, 50 Payment from dual union all SELECT 'AAA' SSN, '01' CODE, '01-AUG-89' RECORD_DATE, 50 Payment from dual union all SELECT 'BBB' SSN, '00' CODE, '01-FEB-89' RECORD_DATE, 0 Payment from dual union all SELECT 'BBB' SSN, '01' CODE, '01-AUG-89' RECORD_DATE, 50 Payment from dual union all SELECT 'CCC' SSN, '00' CODE, '01-FEB-89' RECORD_DATE, 50 Payment from dual union all SELECT 'CCC' SSN, '01' CODE, '01-AUG-89' RECORD_DATE, 0 Payment from dual union all SELECT 'DDD' SSN, '00' CODE, '01-OCT-89' RECORD_DATE, 0 Payment from dual union all SELECT 'DDD' SSN, '01' CODE, '01-AUG-89' RECORD_DATE, 50 Payment from dual
I have a contract that has several categories with payments in each one. If there is a payment=0, then a category is considered closed. The contract is considered closed when all categories are closed.
I need a SQL that will return the number of months within the year that contract was open. In the example above, the last category closed on 11/01, so the result should be 10. If the last line was not there, the contract would still be open in 2007 and the result should be 12.
wanna to make matrix report retrieve months year and the number of weeks from dual table it supposes to the weeks number is 52 or 53 week months and weeks on the rows please find attach pic it show what i need to do for exmple
month name: January February March April May June July August September Nov October December no of week : 1-2-3-4-5-6-7-8-9-10-11-12-13-14-15-16-17-18-20-21-22....... TO 52 week
I've created a stored procedure which creates itself a view (a MV to be honest); the instructions to create this m.view are dinamically built insinde my procedure, so each time i run it, based on the different input parameters, i've got a different result (my output m.view can have three colums the first time, or ten the next time) how can I read my output view to put the data into file? I've tried with "select * bulk collect into my_array from my_ output_ view"...after declaring "my_array" as a varying array with the max number of colums I could ever have...but nothing: if the array dimension doesn't match the number of columns that i've on my view, i.e. i receive "ora-00947 not enough values" error.
Is there a method to dimension dinamucally the array to store my data? Or should I change the code to fetch some other way the data i need to put to a file?
My goal is this:I have a table which is being updated/changed by lay people with certain types of values. Constraints are given to them, but they need not conform to them as they update the table in excel.Now, I want to validate this table every-time before I use it. i.e. implement a script which can be run to verify is all the values are in the right format for further usage.
I have a variable number of columns (i.e. users can add further columns as their requirements change).From columns 3 to 'n' (depending on table given) the values should be 'Yes' or 'No'. How do I check this for a variable number of columns in PL/SQL?
i am working on the oracle 10g.currently i want to build one procedure,where i get a variable which contain character as well as number.my aim in the procedure is to replace all the character like ( a,b..z) in this variable with the number field.
example
suppose i have one variable say
var := 'MALT011000012345MTLCAST001SMT84' now i want to replace each character say A with value 23 B with value 56 L with value 99 9 i will get these value form another table).
i will have handle thousands of variable and they can start with any character and they contain character anywhere.
I have created the following procedure. Since I am using this first time I don't know how to execute this.
CREATE OR REPLACE PACKAGE GAFT_PROG_DIT.ram_package IS TYPE type_ots IS TABLE OF ORDER_TREND_SCORE%ROWTYPE INDEX BY PLS_INTEGER; PROCEDURE InsertTrend( P_TYPE_OTS_REC IN type_ots ); END; /
I am calling a select query inside a procedure but i need to set environment variable 'set linesize 200' inside that procedure but i am not able to create the procedure due to some error. I am attaching the procedure query here with:
before the select query i need to insert this environment variable : "set linesize 200"
I am using ORACLE SQL developer.. I am trying to schedule a package to run daily..here is the overview of my package.. ----- create or replace PACKAGE BODY xxx_MTO_yyy AS PROCEDURE yyy_mto (p_message OUT VARCHAR2, p_detail OUT VARCHAR2, p_value OUT VARCHAR2) IS XXXXXX CXXXXXX XXXXXXX END yyy_mto; end xxx_MTO_yyy;
Now I created schedule as shown (The sql is processed)
begin dbms_scheduler.create_schedule (schedule_name => 'MTO_DAILY', start_date=> trunc(sysdate)+6/24, repeat_interval=> 'FREQ=DAILY; BYDAY=MON,TUE,WED,THU,FRI,SAT,SUN; BYHOUR=22;', comments=>'Runtime: Every day (Mon-Sun) at 6:00 ); END;
Now I am creating SCHEDULER PROGRAM as shown (sql processed)
begin dbms_scheduler.create_program (program_name=> 'mto_DATA', program_type=> 'STORED_PROCEDURE', program_action=> xxx_MTO_yyy.yyy_mto', enabled=>true, comments=>'Procedure to collect session information' ); end;
Now i am creating the scheduler jobs as shown (here also the sql processed)
a) the job should have been visible under the "jobs" tab in sql developer. I dont see that. b) When I tried to run the job manually using ********** (BEGIN DBMS_SCHEDULER.RUN_JOB ( JOB_NAME =>'STR_DATA' ); END;
it failed , saying that "ORA-06553: PLS-ORA-06553: PLS-306: wrong number or types of arguments in call to 'yyy_MTO'". When defining the "dbms_ scheduler. create_program" object , how can I define the arguments?. My procedure has 3 variable out arguments?
I have two procedure , from first procedure having some ref cursor output.
from second procedure I need to call first procedure and i need to process ref cursor output from first procedure so I decide to use bind variable to process ref cursor output but it showing error .
can I define bind variable inside the procedure , then how can I define it .
SQL> CREATE OR REPLACE PROCEDURE emp_by_job ( 2 p_job VARCHAR2, 3 p_emp_refcur OUT SYS_REFCURSOR 4 ) 5 IS 6 BEGIN
I have started reading ORACLE 11g R2 PL/SQL programming doc, and I am stuck at bind variable. I just copied the example in the books and found error -
First I have written below procedure and compiled successfully -
CREATE OR REPLACE PROCEDURE FORMAT_STRING ( string_in IN OUT VARCHAR2) AS BEGIN string_in := '[' || string_in || ']'; END FORMAT_STRING; Then I have written below function and also compiled successfully - create or replace function join_strings (str1 varchar2, str2 varchar2) [code]......
how can I pass the sh variable (.i.e file name stored in sh variable called($F)) as a input of below mention procedure (YODEL_XL_ INS_SDG_ COMMER_ PROD)
for F in *.dat; do # echo $F # #sqlldr apps/apps control=$CONTROL data=$F # Below Part is used for Add the file name into table [code]...
I need to execute a procedure based on a value in a form. So the procedure name will be changing for value selected in a list.
I need to know a method where i could store the procedure name in a table and when ever i select a value from the list, the respective procedure needs to be executed.
I have to use bind variable for dynamic sql in a procedure. Is there a way to have control on these values. Say for example:
Procedur MyProc ( In_EmpID Number default null, In_EmpName Varchar2 default null, in_JoinDate Date default null [code]....
I have more than 5 In parameters, all 5 is not compulsory by default they are null and sql formation is also dynamic with in the procedure.I need to map bind variable to a proper one.. Is there a way to handle bind variable.
I am reading in a selection of parameters. I have created a new variable which I want to set according to the value of one of the input parameters.
I am doing this straight after declaring the variable, but before the cursors and BEGIN statement It is throwing an error when I do this - but I have to do it before the cursors.the variable I am setting is: v_fptransType you can see the IF statement towards the end of the code.
the error I am getting is:Error(28,3): PLS-00103: Encountered the symbol "IF" when expecting one of the following: begin function package pragma procedure subtype type use <an identifier> <a double-quoted delimited-identifier> form current cursor The symbol "begin" was substituted for "IF" to continue.
beginning of the
create or replace PROCEDURE "P_GLPOST" (i_entity IN varchar2, i_transType IN varchar2, i_startDate IN VARCHAR2, i_endDate IN VARCHAR2, i_accountPeriod IN VARCHAR2, i_includeInternals IN NUMBER, i_chargeable IN NUMBER, i_trialPost IN NUMBER, i_postingReport IN NUMBER, TESTER IN VARCHAR2) is --set serveroutput on size 1000000;
I have a table that has 10 columns which is used to store the customer information (e.g Gender, Age, Name). And i have wrote a store procedure to compare the before and after value of column since there has a parameter to control which column need/no need to be updated while the value being changed.
For example, master table "CUST" has column (NAME, GENDER, AGE). "CUST_TEMP" is a temporary table to store the input image which has the same table structure as "CUST".
DECLARE bef_val CUST%ROWTYPE; aft_val CUST_TEMP%ROWTYPE; BEGIN SELECT * INTO bef_val FROM CUST WHERE name = 'ABC'; SELECT * INTO aft_val FROM CUST_TEMP WHERE name = 'ABC'; [code]....
For the above case, i need to type 3 times of "sp_compare_val ( bef_val.xxx, aft_val.xxx )" on the program. And if the table has more than 10 columns, i need to type more than 10 times.Thus, is it possible to pass in a dynamic variable while calling the store procedure. let say, where the 'xxx' can be definable?
the moment my 11g database is connecting to a php web front end. this following procedure is the one I'm having trouble with.
CREATE OR REPLACE PROCEDURE "BSISSONS"."CREATE_EXCURSION" ( min_places IN excursion.min_places%TYPE, max_places IN excursion.max_places%TYPE, additional_charge IN excursion.additional_charge%TYPE,
[code]...
I can select into an output variable to return the value of the primary key of the newly inserted row back into the webpage, but i need to be able to 'select into' a temp variable to insert this value into another table on the same procedure. I get complie errors when i try to 'DECLARE' a variable after the 'AS' keyword
I'm a student researching SQL, Oracle queries. I'm currently writing a oracle:JDBC to query by id, then receive all tuples that belong to id and compute GPA. I convert letter-grade to # in query how to count rows pertaining to id, then average GPA of all tuples. I understand Count(*) where sid=?, but i need to count the rows for id, then convert letter to number, finally compute gpa for all pertaining tuples belonging to id.
Everything works find but the last query for my JDBC prog.Here is my query as of now...
"SELECT grade, CASE WHEN grade = 'F' THEN 0 WHEN grade = 'D' THEN 1 WHEN grade = 'C' THEN 2 WHEN grade = 'B' THEN 3 WHEN grade= 'A' THEN 4 END AS letter_grade FROM Grades"
How do I count all tuples then compute the gpa pertaining to id.For all IDs?
how can i compute row wise multiplication for each unique value of id. I am trying to get the output as showing id and their respective results after multiplying the corresponding values.
CREATE TABLE mult_tbl( id NUMBER, val number ); insert all into mult_tbl values (1,2) into mult_tbl values (1,3)
I have to create some indexes in a production database. Do I need to Compute Statistics after creating indexes? Or when I create they automatically are computed?
The version I'm using is:
Oracle Database 10g Release 10.2.0.5.0 - 64bit Production PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for 64-bit Windows: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production
