The data in the table was imported from a csv file and there is a relationship between the rows. Each combination of col1, col2 and col3 describes a full route of a journey. The row with an entry in col6 describes the full route and the other rows describes each leg in the route.
For example, for R1, the route is AA to BB via CC.
Another example for R4 the route is FF to SS via XX, PP, and OO.
What i would like to do is missing a route. For example the route for R3 is DD to EE via FF. There is an entry for DD to FF but is missing an entry for FF to EE.
The results should return the following rows which are incomplete
Here is what i have come up with but it doesnt quite returned the correct result.
select * from tableA a
Where not exists(
select 1 from tableA b
where instr(col6,col4,1)>0 and instr(col6,col1,1)>0)
And a.col1=b.col1
And a.col2=b.col2
And a.col3=b.col3
)
I have a sets of data in table ow_ship_det , from which i want to group all the records which are having same sl_desc but with the condition that sl_qty is not more than 1000 and sl_wt not more than 50000, i managed to do it but the problem is i want the wieght(sl_wt) and qty(sl_qty) to be evenly distributed among groups or boxes for example take the first four records which have common sl_desc 'H170' Where the qauntities are 15000,15000,10000,10000 as per the condition and loop written in program it will bring the 2 boxes or serial numbers with first 3 weights into 1 box as 40000 and other box as 10000, which i dont want instead i want to have them as 25000 each.
CREATE TABLE OW_SHIP_DET (SL_PM_CODE VARCHAR2(12),SL_DESC VARCHAR2(20), SL_WT NUMBER,SL_QTY NUMBER); insert into ow_ship_det(sl_pm_code,sl_desc,sl_wt,sl_qty) values ('A','H170',15000,300); insert into ow_ship_det(sl_pm_code,sl_desc,sl_wt,sl_qty) values ('B','H170',15000,300); insert into ow_ship_det(sl_pm_code,sl_desc,sl_wt,sl_qty) values ('C','H170',10000,300);
[code]...
--if you see above the weight is not balanced properly in batches 0001 for H170 Desc it should get divided equally as below
ob_batch OB_PM_CODE OB_DESC OB_QTY OB_WT 0001 A H170 300 15000 0001 C H170 300 10000 0002 B H170 300 15000 0002 D H170 300 10000
i have a table where there are codes of length 6 or length 12 some times, i need to add the summary of amount based on two different types of codes, one is adding the distinct codes which are of 6 char long and other sum will be based on from substr(7) till last.
create table strings ( strings_var varchar2(12),strings_amt number); insert into strings (strings_var,strings_amt) values ('02.01',10 ); insert into strings (strings_var,strings_amt) values ('02.01_A11111',15); insert into strings (strings_var,strings_amt) values ('02.02_A11111',15); insert into strings (strings_var,strings_amt) values ('03.01_B11111',15); insert into strings (strings_var,strings_amt) values ('03.02_B11111',15);
I can give you the logic first i'll sort the start_date(already sorted in given example), then i'll compare the 2'nd id start date with 1'st id end date if it is less than the 1'st id end date, which means overlapping is there, then i'll group those 2 id's in to same group if not group them into 2 different groups.
I have one table , with one column having 2,3 or 4 machine codes , i need to display them as each row per machine code will it be possible to do as i have thousands of records similar to the test case and which i had to do it manually in excel and then upload it back.
insert into ow_oper_setup VALUES ('1270','1270001','W165','IR HO BV ') insert into ow_oper_setup VALUES ('1270','1270001','W1332','IR BV ') insert into ow_oper_setup values ('1270','1270001','W1367','RE HO SC BV ') insert into ow_oper_setup values ('1270','1270001','W389','RE HO SC BV')
commit;
SELECT * FROM ow_oper_Setup;
WO_NOMRK_NOPOS_NOMC_CODE 12701270001W165IR HO BV 12701270001W1332IR BV 12701270001W1367RE HO SC BV 12701270001W389RE HO SC BV
--i want the output in the following way or the same table data to be replaced as below
name|address|qty alan,1 the street,5 bert,2 the road,3
what I want to do is create an output that takes the value in the qty column and repeates the number of rows e.g. the alan record 5 times and the bert record 3 times
name|address|qty alan,1 the street,5 alan,1 the street,5 alan,1 the street,5
I am an Oracle beginner and I am having some trouble with the following insert query.
I am inputting values into text boxes and then this is carried out as a trigger upon clicking a button.
INSERT INTO client VALUES(':student.txtclientid', ':student.txtclientname', ':student.clientaddress', 13564338); INSERT INTO enrolment VALUES(':student.txtclientid', ':student.lstoccurrence', null, null);
The above text boxes are all working fine as I have viewed the values using the message command. My proplem is that if i leave the fields blank it inserts ':student.txtclientname' into the row, otherwise it returns "Could not insert record"
I need to join ISSUED_REMOVED Table with ITL Table. having each quantity each row.
Eg. If a unit Serial no '354879019900009' has a part (1015268) issued 8 times and then unissued 4 times so finally the part was issued 4 times. so I need 4 rows to show for each qty 1 for that part and unit serial number.
create table ISSUED_REMOVED_ITEM (REPAIRED_ITEM_ID, ISSUED_REMOVED_ITEM_ID, ISSUED_PART_ID, OPER_ID, ISSUED_REMOVED_QUANTITY) as select 122013187, 1323938, 1015268, 308, 2 from dual union all select 122013187, 1323939, 1015269, 308, 2 from dual union all select 122013187, 1323940, 1015268, 308, 2 from dual union all select
[code]....
-- The way I need to join the Issued_Removed Table
select * from ITL_TEST ITL left join issued_removed_item iri on iri.REPAIRED_ITEM_ID = ITL.ITEM_ID --ITL.ITEM_ID --rlsn2.item_id --126357561 and iri.oper_id = 308 --in ( 308, 309)
I want to get top two rows based on ACCT_UNIT & order by status_date, if there is only one row on acct_unit, get one row. IF more than two rows available, want to get the top two rows based on status_date.
I have to load data file into a table. And the requirement is as below:
Input Data:
1234|20130815|20130822|This is a test, this is the the part 3456|20130823|20130809|This is a test 3456|20130823|20130809|This is a test 3456|20130823|20130809|This is a test 3456|20130823|20130809|Siva 1234
The data should be inserted only in two rows as below:
When Value in first 3 fields is same, 4th field should be appended to the existing value in table.
1234|20130815|20130822|This is a test, this is the the part 3456|20130823|20130809|This is a testThis is a testThis is a testSiva 1234
We have to load 10 million rows in a table from another table based on the multiple joins. How much tablespace size we allocate to the table and for performance point of view how much should be the SGA size.
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
I have a table that holds the definition of schedules, a schedule defines when a document should be submitted to a specific party. The schedule definition contains a start date, and end date, a recurrence type (is this submitted one time, or on a recurring schedule) and the frequency at which the document should be submitted. The second table provides a history of the submissions, this stores when it was due and when it was received. At the beginning of the month we pre-populate the submittal table with a list of records that will be due for the month. For instance, on September 1 we look through all of the schedules and determine which ones would have a record due at some point in 9/12 and then create a record in the submittal table.
I am having issues getting the calculated list of submittal records to work properly.
The DDL and DML will be in a follow-up post
Here is the query that I am currently using and fails to work properly.
with schedules as ( -- generate a list of valid permit schedules select s.schedule_id,s.submittal_frequency_months,s.recurrence_type, s.first_due_date,s.requires_approval, round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) recurrence_number
[Code]....
-- create a list of all potential due dates for these schedules
select submittal_id_seq.nextval,schedule_Id,8,requires_approval, case when recurrence_type='One Time' then first_due_date when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
[Code]....
-- exclude those that already have a submittal record ;
Basically I found all possible records in the schedule table that could have a record due in September, then generate a result for all possible instances and then look at only those whose calculated due date is 09/01/2012. I've determined that the root problem I have right now is this line:
(select level iteration from dual connect by level <= (select max(schedules.recurrence_number) from schedules)) d
Schedule ID 469907 has a start date of 05/15/1992 and a frequency of every 2 months. I calculate what I call the recurrence number, which is the number of times the schedule has happened since its start date to now. I use that to do an add_months calculation from the start date and then eventually compare these calculted start dates with my target month (09/12). In this one records case the calculated recurrence number is 122. So when I generate the connect by level is does 122 records for every schedule, so I end up with duplicate records in the submittal table for many of the schedules. This current query could probably work if I could figure out a way to make the level be schedule ID specific, but I've failed at that thus far.
Aside from the fact that this is returning the wrong results, I am thinking there must be a better more efficient method to determine which records are due for a given month. I was thinking there is probably some cool way to use the model clause here, but I haven't got a grasp on that one yet.
If you run the following insert statement you'll see that it inserts over 2400 records:
insert into submittal (submittal_id,schedule_id,submittal_status_type_id,requires_approval,due_date,created_by,created_date,modified_by,modified_Date) with schedules as ( -- generate a list of valid permit schedules select s.schedule_id,s.submittal_frequency_months,s.recurrence_type, s.first_due_date,s.requires_approval,
[Code]....
-- only submittals whose last due date has not passed, null last date included
and trunc(s.first_due_date,'mm') <= to_date('09/01/2012','mm/dd/yyyy') -- only valid start dates --and round(round(months_between(to_date('09/01/2012','mm/dd/yyyy'),s.first_due_date))/decode(s.submittal_frequency_months,0,1,s.submittal_frequency_months)) >0 )
-- create a list of all potential due dates for these schedules
select submittal_id_seq.nextval,schedule_Id,8,requires_approval, case when recurrence_type='One Time' then first_due_date when recurrence_type='Recurring' and trunc(first_due_date)=to_date('09/01/2012','mm/dd/yyyy')
[Code]...
You can see the problem after words:
select schedule_id,count(0) from submittal where trunc(due_date,'mm')=to_date('09/01/2012','mm/dd/yyyy') and submittal_status_type_id=8 having count(0) >1 group by schedule_id;Tony
We are investigating performance of SQL executions on a database server and we suspect I/O on the server is an issue
For example one particular statement accesses one row during execution (index access) and still takes 2.4 seconds out of which it does I/O for 1.9 seconds
which of the following sections in the AWR will give us the correct information about the I/O, it is slow or not?
1) Load Profile Logical reads per second Physical reads per second
2) Top 5 Timed Foreground Events waits / time(s) for events like "db file sequential/scattered read" average wait(ms) for events like "db file sequential/scattered read"
3) Foreground Wait Events db file sequential read db file scattered read
4) Wait Event Histogram %of waits <1ms <2ms Disk file operations I/O db file sequential read db file scattered read
5) Wait Event Histogram Detail (64 msec to 2 sec) Wait Event Histogram Detail (4 sec to 2 min)
6) IOStat by Function summary Buffer Cache Readsreads per sec
I am trying to determine the number of times a value appears and display the count. However the value can only be counted once per 'trip' even though it may appear several times per trip.
with the above data the expected value would be two because the trip id appears twice so it was just the one trip - given a count of one. I am not sure how create a query to check this.
The db is 11.2.0.3 on a linux machine.I would like to know the "fetch size" of an application, but I was not able to find any related meteris in v$statname.
The application configruation is invisible to me.Do I need to do some calculations based on statistic metrics from v$statname?
If so, what meteris should be considered for the assumption for "fetch size" ?
The following is from manual, but the application configuration is invisible to me.
[URL]
Setting the Fetch Size
The following methods are available in all Statement, PreparedStatement, CallableStatement, and ResultSet objects for setting and getting the fetch size:
I have a requirement to get the records group wise.Ex: For each departments, i need to get the employee details as a coma seperated.It means that the output must have the department name in first column and the second column must contain all the employees in that particular department (As a coma seperated).
In the below data, a container is moving from one city to another. 1,2 ,3 can be any number which i want to generate and use as keys to group the cities. Eg: AUH, JEB, CIW belong to the same key=2; SIN, IKT belong to a new group 4. The City where difference between the Seq# is greater than 1 (eg between S8W and AUH), a new group starts.
Name Hours date a810/11/2011 a 510/12/2011 a610/13/2011 a710/14/2011 a710/15/2011 a810/16/2011 a710/17/2011 a810/18/2011 a810/19/2011 a710/20/2011 a710/21/2011
If i want the sum of hours for 3 days range ,how should i do it.
E.g. say
name hrs startdate enddate
a 19 10/11/2011 10/13/2011 a 22 10/14/201110/16/2011 a 23 10/17/2011 10/19/2011
How can I get the grp_id for unique combination of manager and department, grp_id should be created on asc order of manager_id. In this example manager_id 100 is minimum, so it should be grp 1 and all the employees with that manager_id should be in grp_id 1, for manager_id 114 grp_id should be 2.
If, there is manager_id 117, it should create grp_id 3.
To get grp_num ,I can use row_number() over (partition by department_id,manager_id order by employee_id) grp_num
I am looking for an update statement for this issue.
I'm trying to determine if/when a possible Hierarchical circular reference will occur in my data
Sample Hierarchical structure that I have
Emp -> Supv A BA CB DC EC
[Code]....
Finally, to my question. It seems that I can detect the problem After it happens but do I need a trigger on the update statement to detect if/when a possible circular reference will occur?? or can I run a sql statement prior to update to detect possible circular reference?
