SQL & PL/SQL :: CASE Syntax - Result To Be NULL As Don't Want Negative Values
May 6, 2010
i am doing a data transformation using the following function
FLOOR(ONSET_TPQ-VAX_DATE)
Where ONSET_TPQ and VAX_DATE are both dates. Now in a situation where the ONSET_TPQ precedes VAX_DATE I want the result to be null for those records. As an example if ONSET_TPQ= 2000 and VAX_DATE=2010
I want the result to be NULL as I dont want negative values. Any exact SQl syntax on how to do that. DO i write a case statement?
View 6 Replies
ADVERTISEMENT
Mar 12, 2013
I am trying to use the following case statement in my where clause. My problem here is, I get no rows.
tab1.col1 =
case
when (tab1.col1 = 'VAR') and (tab1.col2 is null or tab1.col2 >= tab2.datecol) then
tab1.col1
else
null
end
View 13 Replies
View Related
Apr 28, 2011
I have one column table with negative and positive values and want to display positive and negative values in different columns thru a single query.
Column
1
-4
3
-6
output should be like
A B
1 -4
3 -6
View 14 Replies
View Related
Jul 29, 2012
We are getting Negative values of Library cache hit ratio in AWR Report of 11g(11.2.0.3) with Solaris[tm] OE (64-bit). Why it shows negative value.
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 99.87 Redo NoWait %: 99.99
Buffer Hit %: 92.17 In-memory Sort %: 100.00
Library Hit %: -3,321.23 Soft Parse %: 81.95
Execute to Parse %: 92.88 Latch Hit %: 95.11
Parse CPU to Parse Elapsd %: 87.25 % Non-Parse CPU: 81.39
View 3 Replies
View Related
Oct 26, 2012
The line highlighted in Bold is where I have the issue. I want it to pick up NULL or Blanks in the method type has well as types E,G,T. I've tried NULL is the statement, "", and '' put none of these work. What am I doing wrong? I'm using 11g by the way
select specialty,
member_id,
sp_id,
service_date,
sum(case when method_type = 'C' then (payment_total) end) "CONSULTATION",
sum(case when method_type = 'M' then (payment_total) end) "MOT",
sum(case when method_type = 'D' then (payment_total) end) "TESTS",
[Code]....
View 3 Replies
View Related
Mar 26, 2013
OK, Now that the syntax has been corrected with "Chanchal Wankhade" I have an entirely new issue. I am sure this issue has to do with my case statement logic. I am getting multiple rows, when I am only looking for one. Here is my code:
SELECT
CASE
WHEN EP.PHYSICAL_DATE IS NULL
THEN
CASE
WHEN EC.ORIGINAL_CONTRACT_START < ((SYSDATE) - 365)
THEN 'NEEDS PHYSICAL'
[code].....
However, only one of these rows should be the output, which is "No". How do you get a nested case statement to evaluate to one result, instead of multiple? I'm quite sure it is in the logic. To spell it out, this is what I am trying to accomplish with the above code: If the "EP.PHYSICAL_DATE" is null, then use these sets of formula's to evaluate the output, BUT if the "EP.PHYSICAL_DATE" is not null, then use these set's of formula's to evaluate the output.
As it stands now, it appears as if my nested case statement is doing exactly what I told it to do, which is to evaluate both conditions, and output both.
View 0 Replies
View Related
Jul 10, 2012
My requirement is as follows .
Oracle version details
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for 32-bit Windows: Version 11.1.0.7.0 - Production
[code]....
View 6 Replies
View Related
Dec 3, 2010
I have a scenario where I have to get all the available dates of a resource. I am using the below query to get it.
Select Avail_Date AS MONTH
, Resource_Id
FROM res_tsk
, (SELECT Rownum - 1 + TRUNC (sysdate) avail_date
FROM Dual
[code].......
The result of this is:
Month Dates Resource_ID
12/3/10 0:00 NULL
12/4/10 0:00 NULL
12/5/10 0:00 NULL
12/6/10 0:00 100033868
As I am doing a outer join, if the resource is not available on a particular day the resource_id is coming as NULL as it is not available. Is there any way to populate this NULL resource_id with the original resource_id as the resource_id is same for all the result set.
I need the output to be
Month Dates Resource_ID
12/3/10 0:00 100033868
12/4/10 0:00 100033868
12/5/10 0:00 100033868
12/6/10 0:00 100033868
View 3 Replies
View Related
Jul 10, 2013
In the following query WHEN
supplier_name = 'IBM' and supplier_type = 'Hardware' THEN
only 'North office' is being retrieved but how to get 'South office' also along with it.Is there a way to write multiple conditions in THEN clause of case stmt something like THEN 'North office' AND 'South office'.
create table suppliers_temp(supplier_id number(5),supplier_name varchar2(10),supplier_type varchar2(10));
table suppliers_temp created.
insert into suppliers_temp(supplier_id,supplier_name ,supplier_type)values(1,'IBM','Hardware');
1 rows inserted.
insert into suppliers_temp(supplier_id,supplier_name ,supplier_type)values(2,'IBM','Hardware');
1 rows inserted.
insert into suppliers_temp(supplier_id,supplier_name ,supplier_type)values(3,'TCS','Software');
1 rows inserted.
[code]....
View 4 Replies
View Related
Mar 13, 2012
I have a table second_table which has a username and code field. A username (not the primary key) may be entered multiple times with different codes, or a single code 'ALL', in which case, the codes have to be fetched from 'third_table'. I am unable to form a 'case' clause to handle the fact that a list has to returned when the 'code' field from the second_table returns 'ALL'.
e.g.
Second_table
username code
A ALL
B 23
B 56
B 33
Third_Table
code
67
78
So, when the user asks the codes for user A, he should get 67 and 78 and when he asks for the user B, he should get 23,56 and 33
View 13 Replies
View Related
Oct 15, 2012
I am using Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production version
I am having the data in following table -
drop table stud_fact;
create table stud_fact(stud_NM, LVL_CD,ST_DT_DIM_KEY,OVRNK) as select
'ABG Sundal','H','20110630','175' from dual union all select
[Code].....
View 8 Replies
View Related
Apr 23, 2008
how to retrieve values if user entered in Mixed case means (case insesitive)?
We don't have control when user enters values and it might be SMITH or Smith or smith or SmIth.
How can write the query to get this kind of mixed case data?
View -1 Replies
View Related
Aug 24, 2010
with t as
( select 1 id, 101 book_id, 'MICROBIOLOGY' book_type, 1 category, 'sCIENCE AND TECH' category_name
from dual
union all
select 1 , 101 , 'MICROBIOLOGY', 2 , 'HEALTHCARE' from dual
union all
[Code]....
id book_id BOOK_TYPE category category_name
1 101 MICROBIOLOGY 1 SCIENCE AND TECH
1 101 MICROBIOLOGY 2 HEALTHCARE
1 102 CHEMISTRY 5 CHEMICAL ENGINEERING
2 105 COMP SC 1 SCIENCE AND TECH
The above is the output for a query after joining multiple tables. I have just put here the output I am getting after joining the tables.Now I want to achieve the below result.
Expected output: it should be | delimited
1|101|MICROBIOLOGY|102|CHEMISTRY|1|sCIENCE AND TECH|2|HEALTHCARE
2|105|COMP SC|1|SCIENCE AND TECH
Is there any alternative way other than SYS_CONNECT_BY_PATH? I also tried to use CONCAT_ALL but its not working.
View 13 Replies
View Related
Nov 7, 2011
I have a table with 4 columns. The data is stored in an hierarchical format where L1 being the parent and L4 being the lowest child.
L1 L2 L3 L4
1 11 111 1111
2 21 211 2111
2 22 222 2222
[code]...
So each Level(L1 ..L4) has zero or many child levels which further has more levels.With out using PL/SQL how can we write a Select query to give me a distinct of all children, all the way to the lowest level (L4).Example: give me all the children where L1 = 3.Result: 31, 32, 33, 311, 322, 333, 3111, 3222, 3333Is it possible to write such a query or am I asking too much logic out of a select and should go with PL/SQL.
View 12 Replies
View Related
Apr 20, 2007
i have a stored proc where i am selecting a value into a variable like so:
SELECT FUNCTION
INTO V_FUNCTION
FROM FUNCTION_TABLE
WHERE FUNCTION = P_INPUT;
Now, my problem lies in where there is no value returned (oracle will throw an error).
View 3 Replies
View Related
Jan 23, 2013
I have 2 tables, AFF_TEMP and COUNTY
AFF_TEMP has the following columns FNAME, LNAME, EMAIL and COUNTY
COUNTY has 2 columns COUNTY_ID and CNAME
Both tables have the following test data
AFF_TEMP
Joe, Bloggs, joe@gmail.com, ''
Ann, Bloggs, anne@gmail.com,Donegal
and COUNTY column in AFF_TEMP can contain a NULL value
County table has the following Test data,
1, Dublin
2, Donegal
3, Tipperary,
4, Galway
I am trying to select the following from both tables FNAME, LNAME, EMAIL, COUNTY_ID.Tried the following queries
select a.FNAME, a.LNAME,a.EMAIL, C.COUNTY_ID FROM temp_aff A LEFT OUTER JOIN COUNTY C ON A.COUNTY=C.CNAME
OR (A.COUNTY IS NULL)
select a.FNAME, a.LNAME,a.EMAIL, C.COUNTY_ID FROM temp_aff A, COUNTY C
WHERE C.CNAME IN (SELECT UPPER(A.COUNTY) FROM TEMP_AFF A)
[code]...
View 3 Replies
View Related
Apr 23, 2010
Is there a way to replace a field with another if the particular value returned is null?
View 11 Replies
View Related
Dec 17, 2010
We are working on a migration project and we need to move 75 million rows from source system to target system.
Total number of columns in source system - 90 cols.
Out of the 90 columns 10 cols are system fields and rest 80 are properties for each record.
We are required to migrate all system cols and some required properties. In total we will migrate around 25 columns[10+15] for each record.
Before actaul migration , we need to do a data cleansing activity and hence we move the data to a staging table.
To create the staging table, we considered the below appraoches.
1. Create the staging table with around 30 coloumns so as to fit the data from source system[map the columns based on datatype]
2.Create the staging table with actual columns[90 columns] and import only the required properties. The rest all columns will remain NULL.
Do the data cleansing and move to target system.
My question here is, if we go with approach 2, We will not mix the data, as there will be a one-to-one mapping. But many columns will not have data and remain NULL. Will it affect the performance since we deal with 75 million rows.
View 3 Replies
View Related
Jul 28, 2010
I have a table abc with two column (marks,id) both can have any value.
Value of the id column is zero at several places.When I divide marks by id. I get divide by zero error.
how to replace zero with null.
View 22 Replies
View Related
Jul 20, 2012
I have main query..And i written a Query for Issued Quantity. The query is retrieving exact data. And when i add the Query in main query the data is coming with extra null values.
for ex. Query for Issued Qty fetch 16 records. and i run the main query it fetch 20 records...there r 4 records which issued Qty is null. How can i restrict that records.
View 14 Replies
View Related
Nov 8, 2012
I have two tables A and B.
A
--
variable value
-------- ------
a 10
b 20
B
--
Exp
---
b-a
b*a
b/a
How can the variables be replaced with values(10,20) using a single query...?
View 2 Replies
View Related
Aug 5, 2010
My query is ignoring the null value
CODEselect count(*) as COUNT from EMP where EMP_ID in '1001,1002,1003'
returns the result as
CODECOUNT
----------------------
0
1
2
EMP_ID '1001' has 0 records(i.e., EMP_ID 1001 doesnt exists in the table)
EMP_ID '1001' has 2 records
EMP_ID '1001' has 3 records
where as the query
CODEselect count(*) as COUNT, EMP_ID from EMP where EMP_ID in '1001,1002,1003' group by EMP_ID
returns the result as
CODECOUNT | EMP_ID
---------------------
1 | 1002
2 | 1003
I want the null value also to be counted when I run the second query i.e., the output should be like
CODECOUNT | EMP_ID
---------------------
0 | 1001
1 | 1002
2 | 1003
View 2 Replies
View Related
Jun 11, 2010
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - 64bit Production
PL/SQL Release 11.1.0.6.0 - Production
"CORE 11.1.0.6.0 Production"
I have Event_month, Event_date in SELECT statement. Results of the query has NULL values as well.. I am doing ORDER BY Event_month, and I want NULL values to be at the top..
SELECT d.event_code_dt, count(d.event_number) count1
FROM main_event a,sec_event d
WHERE a.event_id = d.event_id(+)
GROUP BY d.event_code_dt
ORDER BY d.event_code_dt, count(d.event_number) desc
Results are like this
11-MAY-10
21-MAY-10
22-MAY-10
NULL
And I want results to be like this:
NULL
11-MAY-10
21-MAY-10
22-MAY-10
Same thing happens with Event_month
NULL
Feb 2009
Aug 2009
View 2 Replies
View Related
Aug 23, 2010
How can I use OR condition in sql to check whether if the 6 col values in a row is NULL, I need something like below, but idk the syntax of checking if either of the mentioned cols is null using an or condition.
select a.mid
FROM table_a a
JOIN table_b b
ON a.dept = b.dept
JOIN table_c c
ON b.eid = c.eid
WHERE a.tid = :tid
AND (a.i1 or a.i2 or a.i3 or a.n1 or a.n2 or a.n3 or a.t1 or a.t2 or a.t3 ) IS NULL
View 1 Replies
View Related
Jun 17, 2010
There is a table with column holding 3 NULL values one each in every record. When a count function is applied to the column with a filter on NULLs,it returns 0 instead of 3.
But when count(*)is applied,expected result is returned. Would be interested in knowing about this strange behavior of NULL/Count.
View 3 Replies
View Related
Dec 29, 2012
My DB version is 10.1.0.5.0
I want extract the values from the string using below query but i am unable to bring the correct result.
WITH t AS ( select '123,1,3,22' col FROM DUAL
UNION ALL
SELECT '123,,2,1' FROM DUAL
UNION ALL
SELECT '5,1,2,,' FROM DUAL
)
[Code]...
My required result like below.
123 1 3 22
123 2 1
5 1 2
get required result using regular expressions.
View 3 Replies
View Related
Mar 12, 2010
Our organization is attempting to learn more about the partitioning features of Oracle 11g. I've been reading the partitioning manuals, and I have not found a clear answer on this topic, but I suspect I know the answer.
If you create a range partitioned table; using interval partitioning, say something like this:
CREATE table range_parti (
CODE NUMBER(5),
DESCRIPTION VARCHAR2(50),
CREATED_DATE DATE)
PARTITION BY RANGE (created_date)
INTERVAL (NUMTOYMINTERVAL(1,'MONTH'))
(
PARTITION my_parti VALUES LESS THAN (TO_DATE('01-NOV-2007','DD-MON-YYYY'))
);
but you try to insert a null value as the partition key, you get the following error:
SQL> INSERT INTO range_parti VALUES (1,'one',NULL);
INSERT INTO range_parti VALUES (1,'one',NULL)
*
ERROR at line 1:
ORA-14400: inserted partition key does not map to any partition
Elapsed: 00:00:00.07
Is there no way to tell it to use a default partition for NULL values? Or specifically designate a partition for NULL values WITHOUT having to manually list out each partition? It seems it works if you don't use the INTERVAL keyword, list out your partitions, and use MAXVALUE. However, our hope to avoid having that as it creates monstrously huge DDL statements for tables that have lots of date ranges, and we will be forced to manually add new partitions each month as data is added/time passes.
It appears from my experience so far, if your column can allow nulls, you cannot use interval range partitioning on that column.
View 5 Replies
View Related
May 18, 2010
I use a cursor to select records from a database table into a C structure as follows...
{
int iLoop = 0;
int iResult = 0;
[Code]....
The otc_multiplier field is NULL. As is the to_date sometimes. However, when I output the records later, the entries where the to_date is NULL come out fine (no value). But the otc_multiplier is getting output as 0.0 using...
// this is output later in another fuction using the following..
sprintf(newRecord, "%.1f",daServiceRecs->itemMultiplier);
If using c structures in this manner, what is the method for ensuring that numeric values are set to NULL when required?
View 2 Replies
View Related
Jun 21, 2010
I have a report in report 6 which has static field where values are shown for previous year and for current year. the output of the report will be like this
sl no department prev year cur year
01 revenue 2000 5000
02 costing 500 1000
03 excise 8000 900
and so on....
I have a created a fomula field for each and every department and get the value from a particular table. What i require is if suppose the department revenue does not have any value then that row should not be visible. for eg if revenue has a null value then the report should be like this
sl no department prev year cur year
01 costing 500 1000
02 excise 8000 900
View 6 Replies
View Related
Nov 22, 2012
I'm using the odp.net type factory (class IOracleCustomType and the specific annotations...) to map udts to c# classes.By now I had no problems with it, because I've never used "ref" attributes within the udts.Now I need the use of "ref" attributes within udts but it seems that the odp factory cannot handle those references.
For example:_*
A Simple Type:
create or replace type bookcontent_t force as object (
id number(20)
, name varchar2(1000)
);*And a collection with references to objects of this type:*
create or replace type fms_bookcontent_ref_cln force as table of *ref* bookcontent_t;The c# class is generated by odp.net.
When I retrieve data by using odp.net I get a collection with the correct number of elements but the values are null.What can I do to solve this problem with "ref" attributes/lists? How can I get the referenced object instances?
View 0 Replies
View Related
