I am getting following error
SQL> BEGIN
2
3 DBMS_REPCAT.CREATE_MVIEW_REPGROUP (
4
5 gname => 'ORCL_REP',
[code]...
ERROR at line 1:
ORA-06550: line 1, column 8:
PLS-00201: identifier 'SYS.DBMS_REPCAT_UTL2@ORCL.BABU' must be declared
ORA-06550: line 1, column 8:
[code]...
I am trying to execute the below and getting the error:
PLS-00201: identifier 'DBMS.REFRESH' must be declared
The mv is in my schema.. so I am owner. I thought I once read that a dbms.refresh had to be in a block.. so I added the begin and end.. but that didn't resolve it.
I have tried two ways, both resulting in the above error:
execute dbms.refresh('mv_bb_basket');
begin
dbms.refresh('mv_bb_basket');
end;
I need export data from remote server i.e. in Oracle8i envtt. but in my machine having client oracle10g.
I m using command from local machine :
expdp test/test@test_env_tns dumpfile=abcd_dat.dat logfile='abcd.log
then i m getting error :
UDE-00008: operation generated ORACLE error 6550
ORA-06550: line 1, column 52:
PLS-00201: identifier 'SYS.DBMS_DATAPUMP' must be declared
ORA-06550: line 1, column 52:
PL/SQL: Statement ignored
[/code]
Note : I m executing command from my local machine command prompt
I am using oracle 10g database (10.2.0.1.0), which trouugh an error while i am trying to EXPORT.
View 4 Replies View Relatedi m getting this DBMS_LOCK error, i have DBA privilege
Declare
l_count integer := 0;
l_count_t integer := 0;
error_msg varchar2(4000);
begin
select count(*) into l_count from user_objects where object_name='PAKAGE_NAME' and object_type='PACKAGE';
if l_count=0 then
DBMS_OUTPUT.PUT_LINE('ERROR: Package PAKAGE_NAME does not exist in the database');
[code].....
ERROR: Package PAKAGE_NAME or its body is in INVALID state
PLS-00201: identifier 'DBMS_LOCK' must be declared
PL/SQL procedure successfully completed.
I inherited the management of an Oracle 10.2.0.3 database Standard Edition on a 32 bit Microsoft Windows Server 2003 R2 platform with some invalided objects related to SYSMAN schema.
I suppose that probably these invalid objects are derived from a bad **previous upgrading operation*(probably from 10.2.0.1 to 10.2.0.3).Furthermore I looked for a solution on the net and I found that this trouble could be issued dropping and recreating again the Database Control Repository using emca plus specific commands. [URL]On Windows Systems I followed these commands on my test database and the repository was successfully created and all the previous invalidated objects where corrected.
However there is still a view not functioning. I tried to compile it again after the creation of the new Database Control Repository with the command alter view <viewname> compile but it returns the following errors:
Progetto: sqldev.temp:/IdeConnections%23jhoray01XDB.jpr
Errore(7,3): PL/SQL: Statement ignored
Errore(7,19): PLS-00201: identifier 'DBMS_CRYPTO' must be declared
db: 11g
I have import dumpfile for schema refresh but when import completes it made many packages and procedures invalid....
Package compilation error:
pl/sql: Declaration ignore
PLS-00201: identifier 'schema_T_Dump.em_id' must be declared..
I have tried all sort of compilation things but still packages are invalid..I think type is missing in target database from source...
I am importing excel data to oracle table by column mapping using forms 6i. I am using ole2 package and i also created one package.which is given below. My code gets compiled, I am unable to insert record to the table.Values are passed to the procedure, i am able to see the values while debugging, but all values are seen in record 1 (as looping is there) all other remaining records are empty.i.e records are changing but seen only in record 1 and all other records are empty.I also get message 'DATA INSERTED INTO THE TABLE' but when i check it with sql, the table is empty.
PROCEDURE get_excel IS
APPLICATION OLE2.OBJ_TYPE;
WORKBOOKS OLE2.OBJ_TYPE;
WORKBOOK OLE2.OBJ_TYPE;
WORKSHEETS OLE2.OBJ_TYPE;
[code]...
I'm trying to create trigger:
CREATE OR REPLACE TRIGGER TBI_ID
BEFORE
INSERT
ON zoo.risk_eval#ctypein
[code]...
Here is error message:
ORA-24344: success with compilation error
2/14 PLS-00201: identifier 'ZOO.RISK_EVAL_CTYPEIN#ID_SEQ' must be declared
2/3 PL/SQL: Statement ignored
I have a job to run 'scott.product_pkg' daily, but I am getting this following error.
Job failure message:
ORA-06550: line 1, column 8:
PLS-00201: identifier 'scott.product_pkg' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
Following is the scenario:
1. Oracle DB Binaries: 11.2.0.2.2
2. Using dbca to create General Purpose Database and then modify initialization parameter "COMPATIBLE from 11.2.0.0.0 to 10.2.0.3.0" in the "All Initialization Parameters" window.
So, when I finally start installing database, I get following error during the install:
ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version 10.2.0.3.0
ORA-00202: control file: '/u01/app/oracle/cfgtoollogs/dbca/infpp1/tempControl.clt'
IGNORE OR ABORT...
Now you might ask why i am doing this. Actually I want to install fresh 11grel2. database with lower compatible parameter. IMPORT DP custom schemas into this database making sure compatible is set to 10.2.0.3.0. Then run database with such settings for a week and finally change compatible parameter to 11.2.0.0.0
Any thoughts where i am going wrong? as the default template seems not accepting what i am interested to do.
my java program i am executing a pl/sql function using callable statement i checked everything in the function and the function is created without compilation errors in sql*plus environment, and i gave all DBA permissions to the user, but i got the error like below
java.sql.SQLException: ORA-06550: line 1, column 28: PLS-00201: identifier 'NAME' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
and i wrote the function like below for the below table
create table student(regno number(6),name varchar2(15),dob date,phone number(10),
address varchar2(30),cat varchar2(2),password varchar2(12),hallno number(6),
fee_paid varchar2(3),constraint student_pk primary key(regno))
create table fee(regno number(6), branch varchar2(15),amount number(4), ddno number(12), fee_paid varchar2(3),
dddate date, dd_received_date date default sysdate, constraint fee_pk primary key(regno))
[code]...
and the java program is like below
try{
Class.forName("oracle.jdbc.driver.OracleDriver");
Connection connection=DriverManager.getConnection(dbURL,dbUserName,dbPassword);
CallableStatement st=connection.prepareCall("{?=call
[code]...
Actually am trying to replicate two db servers from one in hong kong and another in china. when am trying to establish the replication, am getting error 'ORA-04052: error occurred when looking up remote object' like this...
but the same way i have tried in my local network, it is working fine.i have tried schema replication through enterprise manager grid control..
what are the recommended network requirements for implementing Oracle Multi Master replication.
View 1 Replies View Relatedi need to set up a central server with all the master tables and two other local database which will hold the updatable materialized view of the master table...the databases must be synchronized with central server..and user will work on the materialized view database...
View 10 Replies View RelatedI want to set up advance replication for 3 master site (multimaster) I created 3 master site named orc1,orc2,orc3 and followed up oracle replication management of API book instruction I created 2 tables(tes1,test2) in hr schema in all 3 master site with the same data. then I created the following steps
1-CONNECT repadmin/repadmin@orc1
2-Create the master group named hr_test_repg
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'hr_test_repg');
END;
/
4-add tables test1 and test2 to the group
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
gname => 'hr_test_repg',
type => 'TABLE',
oname => 'test1',
[code]....
I could create DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT for test2 but not for test1 and it produces error
RROR at line 1:
RA-23309: object hr.test1 of type TABLE exists
RA-06512: at "SYS.DBMS_SYS_ERROR", line 105
RA-06512: at "SYS.DBMS_REPCAT_MAS", line 2552
RA-06512: at "SYS.DBMS_REPCAT", line 562
RA-06512: at line 2
I'm getting above error when I run following code
BEGIN
OPEN c_report_data;
FOR rec in c_report_data
LOOP
IF
rec.ESR_SALESMAN <> lv_rep_num THEN
ln_ttl_rep_cnt := ln_ttl_rep_count + 1 ;
ELSE
ln_ttl_rep_cnt := ln_ttl_rep_cnt;
END IF;
I am facing the same problem: SP2-0552: Bind variable "OLD" not declared. When my script create_trigger.sql is executed,there is no error but when i execute it inside a pl/sql block it get above error...In the trigger we are using if conditions
if(:new.sumthing=1)and (:old.sumthing=0)the
do this..
I have one 10g database in other country. I want part of their db (selected tables or tablespaces) and import that data to my 10g DB and i want keep to date this data.
I know two ways
1. Data Pump Imp/Emp via FTP, but i can't send only data that have changed (incremental), i must pumping whole selected part of database (i want only new data from their DB, but consistanse with my DB)
2. RMAN etc. or other archivisation tool, i can do incremental achivisation, but can i send files to another instances (my db) and load only that data? Can i do that with SQL*Loader?
For using replication in our production, here i am testing golden gate as replication tool. I tested all scenario in Uni direction ( source to destination). Now have to test replication with DDL support in Bi-Direction. Not getting any Doc for doing replication in Bi-direction( Two Way). If any one has done the same, then please share limitation of replication in Bi-direction through Golden Gate.
View 7 Replies View RelatedI have 8 databases in a multi master replication. I want to refresh the tables in the replication.
View 3 Replies View RelatedI Have configured the replication between two database's at table level. After few miniuts of successful configuration of replication between two db's at table level, I am getting the ORA-00001: unique constraint (%s_PK) violated error in dba_apply_error.
I checked constraint name,type and status on table replicated is same on both source and destination db.
I am implementing one-way replication between 2 databases.
Do people leave the target database in archive-log mode? Do they backup the target database?
here is what i am trying to do: im as using oracle 8 with sqltool
i have a Very large query. and i notice that many things are repeating. so i want to add them to a variable, instead of re-typing them. for example:
select SomeID from SomeTable;
i want SomeID to be put into a variable. but i still want to be able to get a normal select query at the end so that i can see the returned value:
i tried things like:
declare x number;
begin
set x=45454
select x from SomeTable;
end;
but could not get it to work.
I am trying to create a simple trigger for practice. I am getting SP2-0552: Bind variable "NEW" not declared. error.
Below is the trigger script:
create or replace User_Cxt_Trigger
AFTER
INSERT or UPDATE OR DELETE ON NAME_VALUE_PREFS
referencing new as new old as old
FOR EACH ROW
[code]....
I am trying to create a report and seem to be struggling when trying to declare the columns 'DISK_READS' and 'CPU_TIME' within the statement.
Statement:
set serveroutput on
declare
cursor sqltext_cur is
select sql_id,child_number,sql_text, elapsed_time
from (select sql_id,child_number,sql_text,elapsed_time, cpu_time,
disk_reads,
RANK () OVER (ORDER BY elapsed_time DESC) AS elapsed_rank
[code]....
Error:
ERROR at line 18:
ORA-06550: line 18, column 51:
PLS-00302: component 'CPU_TIME' must be declared
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
ORA-06550: line 19, column 53:
PLS-00302: component 'DISK_READS' must be declared
ORA-06550: line 19, column 3:
PL/SQL: Statement ignored
How many OUT parameters can be declared in function header ?
A) None
B) Any Number
C) One for every return declared in the definition
D) Depends on what the RETURN datatype is
Why exceptions does not raise in cursors declared by user like in the following program
create or replace function sal (p_id employees.department_id%Type) return number is
----sal1 employees.salary%type:=0;
cursor cx is
select * from employees where department_id=p_id;
begin
for i in cx
[code]...
i just what to understand the differnce between the variable declared under the Begin and variable declared under Declared. to understand this i tried a sample plsql procedure as show below
create or replace
PACKAGE BODY TEST_DEV AS
PROCEDURE TESTING(I_NAME VARCHAR2,
I_AGE NUMBER) AS
INTEGE binary_integer := 100;
[Code] .......
the Line L_nums1 NUMBER := 100/0; is throwing error(PLS-00103: Encountered the symbol "NUMBER" when expecting one of the following:)
if i remove the line L_nums1 NUMBER := 100/0; and just declare the variable out side the begin , and using inside the same variable inside the begin works fine
Why question is why we are not able to decalre, initialize and use the same Number variable insde the begin
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
[code]....
I am not getting any error.