SQL & PL/SQL :: PLS-00201 / Identifier DBMS_LOCK Must Be Declared
Dec 9, 2011
i m getting this DBMS_LOCK error, i have DBA privilege
Declare
l_count integer := 0;
l_count_t integer := 0;
error_msg varchar2(4000);
begin
select count(*) into l_count from user_objects where object_name='PAKAGE_NAME' and object_type='PACKAGE';
if l_count=0 then
DBMS_OUTPUT.PUT_LINE('ERROR: Package PAKAGE_NAME does not exist in the database');
[code].....
ERROR: Package PAKAGE_NAME or its body is in INVALID state
PLS-00201: identifier 'DBMS_LOCK' must be declared
I am trying to execute the below and getting the error:
PLS-00201: identifier 'DBMS.REFRESH' must be declared
The mv is in my schema.. so I am owner. I thought I once read that a dbms.refresh had to be in a block.. so I added the begin and end.. but that didn't resolve it.
I have tried two ways, both resulting in the above error:
execute dbms.refresh('mv_bb_basket'); begin dbms.refresh('mv_bb_basket'); end;
I inherited the management of an Oracle 10.2.0.3 database Standard Edition on a 32 bit Microsoft Windows Server 2003 R2 platform with some invalided objects related to SYSMAN schema.
I suppose that probably these invalid objects are derived from a bad **previous upgrading operation*(probably from 10.2.0.1 to 10.2.0.3).Furthermore I looked for a solution on the net and I found that this trouble could be issued dropping and recreating again the Database Control Repository using emca plus specific commands. [URL]On Windows Systems I followed these commands on my test database and the repository was successfully created and all the previous invalidated objects where corrected.
However there is still a view not functioning. I tried to compile it again after the creation of the new Database Control Repository with the command alter view <viewname> compile but it returns the following errors:
Progetto: sqldev.temp:/IdeConnections%23jhoray01XDB.jpr Errore(7,3): PL/SQL: Statement ignored Errore(7,19): PLS-00201: identifier 'DBMS_CRYPTO' must be declared
I am importing excel data to oracle table by column mapping using forms 6i. I am using ole2 package and i also created one package.which is given below. My code gets compiled, I am unable to insert record to the table.Values are passed to the procedure, i am able to see the values while debugging, but all values are seen in record 1 (as looping is there) all other remaining records are empty.i.e records are changing but seen only in record 1 and all other records are empty.I also get message 'DATA INSERTED INTO THE TABLE' but when i check it with sql, the table is empty.
1. Oracle DB Binaries: 11.2.0.2.2 2. Using dbca to create General Purpose Database and then modify initialization parameter "COMPATIBLE from 11.2.0.0.0 to 10.2.0.3.0" in the "All Initialization Parameters" window.
So, when I finally start installing database, I get following error during the install:
ORA-00201: control file version 11.2.0.0.0 incompatible with ORACLE version 10.2.0.3.0 ORA-00202: control file: '/u01/app/oracle/cfgtoollogs/dbca/infpp1/tempControl.clt'
IGNORE OR ABORT...
Now you might ask why i am doing this. Actually I want to install fresh 11grel2. database with lower compatible parameter. IMPORT DP custom schemas into this database making sure compatible is set to 10.2.0.3.0. Then run database with such settings for a week and finally change compatible parameter to 11.2.0.0.0
Any thoughts where i am going wrong? as the default template seems not accepting what i am interested to do.
my java program i am executing a pl/sql function using callable statement i checked everything in the function and the function is created without compilation errors in sql*plus environment, and i gave all DBA permissions to the user, but i got the error like below
java.sql.SQLException: ORA-06550: line 1, column 28: PLS-00201: identifier 'NAME' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored
and i wrote the function like below for the below table
and the java program is like below try{ Class.forName("oracle.jdbc.driver.OracleDriver"); Connection connection=DriverManager.getConnection(dbURL,dbUserName,dbPassword); CallableStatement st=connection.prepareCall("{?=call
BEGIN OPEN c_report_data; FOR rec in c_report_data LOOP IF rec.ESR_SALESMAN <> lv_rep_num THEN ln_ttl_rep_cnt := ln_ttl_rep_count + 1 ; ELSE ln_ttl_rep_cnt := ln_ttl_rep_cnt; END IF;
I am facing the same problem: SP2-0552: Bind variable "OLD" not declared. When my script create_trigger.sql is executed,there is no error but when i execute it inside a pl/sql block it get above error...In the trigger we are using if conditions
if(:new.sumthing=1)and (:old.sumthing=0)the do this..
I am trying to create a report and seem to be struggling when trying to declare the columns 'DISK_READS' and 'CPU_TIME' within the statement.
Statement:
set serveroutput on declare cursor sqltext_cur is select sql_id,child_number,sql_text, elapsed_time from (select sql_id,child_number,sql_text,elapsed_time, cpu_time, disk_reads, RANK () OVER (ORDER BY elapsed_time DESC) AS elapsed_rank
[code]....
Error:
ERROR at line 18: ORA-06550: line 18, column 51: PLS-00302: component 'CPU_TIME' must be declared ORA-06550: line 18, column 3: PL/SQL: Statement ignored ORA-06550: line 19, column 53: PLS-00302: component 'DISK_READS' must be declared ORA-06550: line 19, column 3: PL/SQL: Statement ignored
Why exceptions does not raise in cursors declared by user like in the following program
create or replace function sal (p_id employees.department_id%Type) return number is ----sal1 employees.salary%type:=0; cursor cx is select * from employees where department_id=p_id; begin for i in cx
i just what to understand the differnce between the variable declared under the Begin and variable declared under Declared. to understand this i tried a sample plsql procedure as show below
create or replace PACKAGE BODY TEST_DEV AS PROCEDURE TESTING(I_NAME VARCHAR2, I_AGE NUMBER) AS INTEGE binary_integer := 100; [Code] .......
the Line L_nums1 NUMBER := 100/0; is throwing error(PLS-00103: Encountered the symbol "NUMBER" when expecting one of the following:)
if i remove the line L_nums1 NUMBER := 100/0; and just declare the variable out side the begin , and using inside the same variable inside the begin works fine
Why question is why we are not able to decalre, initialize and use the same Number variable insde the begin
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC' PLS-00302: component 'ENAME' must be declared PLS-00302: component 'SAL' must be declared CREATE OR REPLACE PACKAGE emp_details_proc
We have a package that contains mostly constants like:
c_flag_true CONSTANT CHAR(1) := 'Y'
When I try to reference it in these constants in an adhoc query it doesn't work:
SQL> select * from FINANCIAL_BATCH_STATUS_HISTORY where active_flag = constants_pkg.c_flag_true; select * from FINANCIAL_BATCH_STATUS_HISTORY where active_flag = constants_pkg.c_flag_true ORA-06553: PLS-221: 'C_FLAG_TRUE' is not a procedure or is undefined
Is there a simple solution to make the reference work?
i prepare database server and when i import my dump file from old database it import normal but before it end it give me these errors and these errors it seems that it in loop
IMP-00017: following statement failed with ORACLE error 6550: "BEGIN SYS.DBMS_EXPORT_EXTENSION.SET_IMP_SKIP_INDEXES_OFF; END;" IMP-00003: ORACLE error 6550 encountered ORA-06550: line 1, column 12: PLS-00302: component 'DBMS_EXPORT_EXTENSION' must be declared ORA-06550: line 1, column 8: PL/SQL: Statement ignored
I am trying to do an update with an anonymous PL/SQL block because it has been absolutely impossible to get by the infamous "Single-row subquery returns multiple rows" Whatever.So this code below work... Obviously, I am updating it to a constant.. OK, duh.. Of course it works, it's easy.... Now, I really need to update it to a value in another table that is in my cursor. I believe that I probably need to declare a secondary cursor.
I'm just getting back in the DBA saddle, so I'm a little rusty..
set serveroutput on; DECLARE numrows NUMBER := 0; total NUMBER := 0; CURSOR upd_record_cur IS SELECT m.rowid, m.swcm_cycle, t.newcycle, p.aprem_no from toad.fswcmas m,
[code]...
Not so good here
ORA-06550: line 20, column 53: PL/SQL: ORA-00904: "TOAD"."TTP43425_LOAD"."NEWCYCLE": invalid identifier ORA-06550: line 20, column 10: PL/SQL: SQL Statement ignored
Doesn't work... BEGIN FOR upd_rec IN upd_record_cur LOOP update toad.fswcmas sw set sw.swcm_cycle = toad.ttp43425_load.newcycle WHERE rowid = upd_rec.rowid; total := total + 1;
I am attempting to run a query to pull some data to fill a data request. However I keep getting the following error, "ERROR at line 1:ORA-00972: identifier is too long."
select FS_CORRESPONDENCE_CODE||';'||CM_FILER_SEQ||';'||CM_ORGNAME||';'||CM_FILER_CODE||';'|| CM_PARTY_CODE||';'||RC_LNAME||';'||RC_FNAME||';'||RC_ORGNAME||';'||RC_MAILADDR1||';'|| RC_MAILADDR2||';'||RC_CITY||';'||RC_STATE||";'||RC_ZIP||';'||RC_OCCUPATION||';'|| RC_EMPLOYER||';'||RC_AMT||';'|| from TREFCM, trefrc, treffs WHERE CM_FILER_SEQ = RC_FILER_SEQ
SQL> alter system "_allow_level_without_connect_by"=true scope=spfile; alter system "_allow_level_without_connect_by"=true scope=spfile * ERROR at line 1: ORA-00972: identifier is too long