Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
[code]....
I am not getting any error.
I'm getting above error when I run following code
BEGIN
OPEN c_report_data;
FOR rec in c_report_data
LOOP
IF
rec.ESR_SALESMAN <> lv_rep_num THEN
ln_ttl_rep_cnt := ln_ttl_rep_count + 1 ;
ELSE
ln_ttl_rep_cnt := ln_ttl_rep_cnt;
END IF;
I am trying to create a report and seem to be struggling when trying to declare the columns 'DISK_READS' and 'CPU_TIME' within the statement.
Statement:
set serveroutput on
declare
cursor sqltext_cur is
select sql_id,child_number,sql_text, elapsed_time
from (select sql_id,child_number,sql_text,elapsed_time, cpu_time,
disk_reads,
RANK () OVER (ORDER BY elapsed_time DESC) AS elapsed_rank
[code]....
Error:
ERROR at line 18:
ORA-06550: line 18, column 51:
PLS-00302: component 'CPU_TIME' must be declared
ORA-06550: line 18, column 3:
PL/SQL: Statement ignored
ORA-06550: line 19, column 53:
PLS-00302: component 'DISK_READS' must be declared
ORA-06550: line 19, column 3:
PL/SQL: Statement ignored
i prepare database server and when i import my dump file from old database it import normal but before it end it give me these errors and these errors it seems that it in loop
IMP-00017: following statement failed with ORACLE error 6550:
"BEGIN SYS.DBMS_EXPORT_EXTENSION.SET_IMP_SKIP_INDEXES_OFF; END;"
IMP-00003: ORACLE error 6550 encountered
ORA-06550: line 1, column 12:
PLS-00302: component 'DBMS_EXPORT_EXTENSION' must be declared
ORA-06550: line 1, column 8:
PL/SQL: Statement ignored
I have an Type-object typeObj1 that consists another Type-object typeObj2. this def has another Type-object typeObj3. how to access variable declared inside typeObj3. I have syntax below for each Type.
CREATE OR REPLACE TYPE typeObj1
AS OBJECT
(
SYSTEM_IDENTIFER VARCHAR2(50),
PROCESS_TYPE VARCHAR2(50),
abc typeObj2
)
/
[Code]...
/I have tried to access the type-object in where clause in following way
FROM TABLE(CAST(I_typeObj1 AS typeObj1)) ITTPRC,
......
Where
.......
AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM IN (SELECT ADDTN_INFO_KEY_TYP_NM FROM TABLE(ITTPRC.abc)))
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT IN (SELECT ADDTN_RQST_VAL_DT FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM IN (SELECT ADDTN_RQST_VAL_NUM FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VALUE IN (SELECT ADDTN_RQST_VALUE FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
In this way i am able to access the variable inside typeObj3. But problem is i am getting error "ORA-01427 single-row subquery returns more than one row" when i pass more that one typeObj2.
I passed the values like this in proc execution.
T_T_A_I_V := typeObj3('asdasd',NULL,NULL),
typeObj3('String654',NULL,NULL),
typeObj3('abcdef',NULL,NULL));
T_T_A_I_I := typeObj2('CampusCode',T_T_A_I_V),
typeObj2('PlanNumber',T_T_A_I_V);
What i have done is removed typeObj3 from typeObj2, variables defined in typeObj3 are added in typeObj2 then i got ride of above error. is it correct
how to convert a record type to a table type?
View 4 Replies View RelatedI am importing excel data to oracle table by column mapping using forms 6i. I am using ole2 package and i also created one package.which is given below. My code gets compiled, I am unable to insert record to the table.Values are passed to the procedure, i am able to see the values while debugging, but all values are seen in record 1 (as looping is there) all other remaining records are empty.i.e records are changing but seen only in record 1 and all other records are empty.I also get message 'DATA INSERTED INTO THE TABLE' but when i check it with sql, the table is empty.
PROCEDURE get_excel IS
APPLICATION OLE2.OBJ_TYPE;
WORKBOOKS OLE2.OBJ_TYPE;
WORKBOOK OLE2.OBJ_TYPE;
WORKSHEETS OLE2.OBJ_TYPE;
[code]...
I'm trying to create trigger:
CREATE OR REPLACE TRIGGER TBI_ID
BEFORE
INSERT
ON zoo.risk_eval#ctypein
[code]...
Here is error message:
ORA-24344: success with compilation error
2/14 PLS-00201: identifier 'ZOO.RISK_EVAL_CTYPEIN#ID_SEQ' must be declared
2/3 PL/SQL: Statement ignored
I want to return the output of this query using one OUT parameter from the procedure using RECORD type or OBJECT type.
SELECT empno,ename,sal FROM emp WHERE deptno=30;
Let us assume the query is returning 50 records.
I want to send those 50 records to OUT parameter using record type or object type.
I have one requirement. We have a Package which consists of 2 Stored Procedures which has a RecordType output Parameter.
FUNCTION GET_NFE_INFO(O_status_code IN OUT NUMBER,
O_error_message IN OUT VARCHAR2,
O_message IN OUT "OBJ_FM_NFE_DOCHDR_REC",
I_fiscal_doc_id IN FM_FISCAL_DOC_HEADER.FISCAL_DOC_ID%TYPE)
return BOOLEAN is
I am working on a one Stored Procedure which would display the output from the above function as,
set serveroutput on size 9000;
DECLARE
L_stg_status FM_FISCAL_DOC_HEADER.STATUS%TYPE := 'NFE_P';
L_fiscal_doc_id FM_FISCAL_DOC_HEADER.FISCAL_DOC_ID%TYPE := 12325;
L_dummy VARCHAR2(1) := NULL;
L_status_code NUMBER(1) := 0;
L_error_message VARCHAR2(255) := NULL;
L_message "OBJ_FM_NFE_DOCHDR_REC" := NULL;
[Code]..
Here for each and every data value i am Printing it using DBMS_OUTPUT, L_message record has more than 100 columns. Is there a easy way of handling it instead of using DBMS_OUTPUT ?
We have a queue in which the message is coming from external system. The payload of the queue table is a PL/SQL record type. Once we get the message in the queue, we de-queue the message and read through the PL/SQL type collection and process the message.
From the below query, we are able to convert the PL/SQL collection message to XML message and see the data.
SELECT dbms_xmlgen.getxml
('SELECT USER_DATA
FROM <Queue_table> X
WHERE X.USER_DATA.SALE_ORDER.P_HEADER_REC.ORIG_SYS_DOCUMENT_REF=800501298')
FROM dual;
The new requirement is the message would come in a XML message in the queue. So my question is, is there any way through which the XML message can be converted to the PL/SQL record structure directly (it would be the opposite operation of the above query).
Is there any way that I can check what are the elements present in a pl sql record type by querying in table?
For example if I want to check what are elements present in oe_order_pub.header_rec_type and I don't want to open the package, then in which table I should query? Is it possible?
I am in the need of using a table type object in SQL query.
I have a package which has a spec in which I have declared :
TYPE TESTREC IS RECORD
(
RE_ID NUMBER(9),
RATING_TARIFF_NAME VARCHAR2(40),
);
TYPE TESTTABTYPE IS TABLE OF TESTREC;
TTR TESTTABTYPE;
In one of the package procedures I am collecting data into the above indicated table type object (TTR):
SELECT
RE_ID,
RATING_TARIFF_NAME
BULK COLLECT INTO TTR
FROM TESTPACKTAB;
This works fine. The values get collected into TTR and am able to print them too.
But when I :
SELECT
AA.RATING_TARIFF_NAME
INTO v_name
FROM
TABLE( TTR ) AA ;
in the same procedure immediately after the collection I get the error while running the procedure :
ORA-21700 : Object does not exist or is marked for delete.
I am using a record type to print some column in a same line.
Eg: I want to create index on some composite key columns. But i dont know how many columns are there. So want to use a loop which will count the number of column and then create the index like:
CREATE INDEX PRODUCT.XIF1AGMNT_PROD ON PRODUCT.AGMNT_PROD(LOAN_ID,LOAN_PROD_STRT_DT) TABLESPACE PRODUCT_INDEX;
I have a problem with passing procedure name dynamically with record type i/p parameter..I'm not attaching any insert/create table statements, as I'm unsure of forming the sql statement dynamically..
CREATE OR REPLACE PACKAGE med_order_pkg AS
TYPE deid_med_order_typ IS RECORD(....)
L_deid_med_order_typ deid_med_order_typ;
PROCEDURE RULE_MASTER_PRC (P_IN_RULE IN deid_med_order_typ);
END;
[code]....
From the above, I need to execute a procedure with record type as i/p parameter..V_SQL should form the statement & execute another procedure which comes into the variable V_MSG_PROC .I'm having difficuly in forming the statement...(I did it by hard-coding the procedure with parameter in the next line which is commented out & it works...So how can I modify V_SQL in the above statement?
using as template this table:
create table t1 (c1 number,c2 number);
CREATE OR REPLACE
TYPE REC IS RECORD (
R1 T1%ROWTYPE,
R2 NUMBER
);
I'm trying to create one RECORD type with all the columns from table T1 + one new field R2. But gives me an error.
The point to use T1%ROWTYPE and not to hardcode the columns from T1, is due to if we add a new column to T1, is created when is executed again RECORD definition and not to add the column.
I need to declare a record type in a package spec and used that define record type as a parameter in a procedure.
A procedure will call this package passing a record type . e.g xxtest.tmpprc(employee_rec employee_type);
(TYPE record_type_name IS RECORD (column_name1 datatype, column_name2 datatype, ...);
CREATE OR REPLACE package xxtest as
PROCEDURE tmpprc(trecordType IN VARCHAR2);
END;
What is functional diffrence between type, %rowtype and record.
View 3 Replies View RelatedI'm not attaching any tables / data..etc...I just want to know how to pass the record type to a procedure (which are actually obtained from a table) -- see ** below where I'm getting an error..Need to pass the whole record type "l_shl_order_msg"
CREATE OR REPLACE PROCEDURE CM_BUILD_MSG_PRC (P_IN_BLD_MSG_CURSOR IN SYS_REFCURSOR,
P_OUT_BLD_MSG_CURSOR OUT SYS_REFCURSOR)
IS
l_shl_order_msg CRAE_INTERFACE.GLB_VAR_PKG.deid_SHELL_order_typ;
V_MSG_SHELL_NAME VARCHAR2(1000);
V_MESG_TEXT_SEGMENT VARCHAR2(1000);
V_TEXT VARCHAR2(1000);
V_MSG_TEXT VARCHAR2(4000);
V_MSG_FINAL_TEXT VARCHAR2(4000);
V_MSG_PROC VARCHAR2(1000);
V_SQL VARCHAR2(4000);
V_CNT NUMBER;
L_STATUS VARCHAR2(100);
L_REASON VARCHAR2(1000);
[code]...
I get an error saying that "wrong number or types of arguments in call to ||"..Not sure how to pass record type dynamically...
i have created one varray whose elements are of record type. Now how can i access those record type elements?
structure of table t1:
select * from t1;
IDDESCRIPTION
1a
2b
3c
select * from t2;
ID1DESCRIPTION1
4aa
5bb
1cc
declare
type r1 is record (id t1.id%type);
type r2 is record (id1 t2.id1%type);
type r3 is record (id1 r1, id2 r2);
type var1 is varray(20) of r3;
[code].......
I am working on a webservice call from ORacle.I have a button on my form application called verify.Wheni click on verify button , a pl.sql procedure should be invoked and that procedure will call .net webserive to validate the address , the result from the webserivce will be in xml.I have to extract the xml into some variables and return these varibles to Forms application..I am plannig to use pl/sql table to store the result from web service call.
here are the output values:
Customer_Id varchar2(20),
ErrorCode varchar2(30),
ErrorDesc varchar2(3000),
Fcount number,
FErrorCode -- this is array,-- if fcount >1 then these values will be repeted.
FErrorDesc -- this is array,
FStatusCode -- this is array,
FStatusDesc -- this is array,
Street varchar2(3000),
Street2 varchar2(3000),
Suite varchar2(20),
City varchar2(20),
State varchar2(2),
Zip_Code varchar2(10)
create record type and pl/sql table for these.I want to return pl/sql table as a out parameter to the form.
I have two cursors like
cursor_A IS select * from table_a where condition_A;
cursor_B IS select * from table_a where condition_B;
record_A is a recorded of cursor_A%ROWTYPE
record_B is a recorded of cursor_B%ROWTYPE
I define a procedure like pro_A(record_in cursor_A%ROWTYPE) can I overload this procedure by defining pro_B(record_in cursor_B%ROWTYPE)?
If I can't, Can I call pro_A by passing record_B as the parameter to it?
I'm trying to execute a dynamic sql that calls a function. But that function has inserts and deletes inside and this way it can't be called through a select statement. And to be worst, it has an other problem, my function uses a record type as parameter.
My code (sample):
-----------------
DECLARE
type r_parameters is record
(cd_query cons_query_param.cd_query%type,
cd_usuario cons_query_user.cd_usuario%type,
nr_param cons_query_param.nr_param%type,
vl_param varchar2(2000),
[code].....
Is there a way we could define a record or a nestedtable with a type based on weak refursor i.e
TYPE RC IS REF CURSOR;
C2 RC;
Type t is table of c2%rowtype;
Following is some more explanation of what I am trying to do.
I have a table T with column A and B. Column A is a primary key with number 1,2,3,4,5,6, Column B has diffrent sql stmts stored. i.e 'Select * from emp', Select count(1) from dept' and so on. So table will look like
1 Select * from emp
2 Select count(1) from dept
Now I want to select statements stored in table T one by one and execute them by using cursor. Problem arises as i need to fetch the cursor into some variable but the outcome of each statment is diffrent and oracle does not allow to use cursorname%rowtype for a weak ref cursor.
Get following output using user_source(or other) view?
Package_nameProcedure_nameline_startline_end
ABCXYZ1022
In procedure_name column it could be any procedure, function name or any object name exist in package body.
we are doing database upgradation to 11.2 from 10.2,i have found two invalid components but i couldn't find any invalid objects for those related components. find the output ...
SQL> set pagesize 500
SQL> set linesize 100
SQL> select substr(comp_name,1,40) comp_name, status, substr(version,1,10) version from
dba_registry order by comp_name; 2
COMP_NAME STATUS VERSION
---------------------------------------- ----------- ----------
JServer JAVA Virtual Machine VALID 10.2.0.3.0
[code]...
17 rows selected.
SQL> select substr(object_name,1,40) object_name,substr(owner,1,15) owner,object_type from
dba_objects where status='INVALID' order by owner,object_type; 2
no rows selected
SQL> select owner,object_type,count(*) from dba_objects where status='INVALID' group by
owner,object_type order by owner,object_type ; 2
no rows selected
How can I determine version of oracle database from APEX. Is there any built in table or view is available in APEX? Is it possible from Shared Component?
View 5 Replies View RelatedI am getting this error on a varchar2(30) data column that I am trying to convert to number. I am creating a new view against some tables that house converted legacy data.The table is defined with a line_type column and a line_value columns. The line_type will contain either 'AMT', 'DATE' or 'STR'. The line_value column is defined as varchar2(30). Based on the line_type, that will determine how I format the line_value data. I have created the select for my view to translate this using a case statement:
CASE line_type
when 'AMT' then round(to_number(line_7_value),2) when 'DATE' then to_date(line_7_value, 'YYYY-MM-DD')
ELSE
line_7_value
END
I can't figure out what I am doing incorrectly. It does not like the "When 'AMT'" line, gives me an error of 'inconsistent data type, expected NUMBER, got CHAR". The data in line_7_value is defined as varchar2(30), I attempting to use To_number to convert it to a number, then round the number. I don't know why it says it is 'expecting number'.
I'm trying to deduct x hours from a timestamp value. Everything works fine if x yields a result that is on the same day as the value I'm deducting it from. However, if it yields the day before then it gives the wrong answer using DML (although in SQL it works fine). Let me explain with an example:
Let's say current_timestamp is 20-MAR-12 09.40.00.000000 +00:00
If I deduct 8 hours from this I get the correct answer: 20-mar-12 01:40:00 (syntax: show current_timestamp-8/24)
If however, I deduct 10 hours from it (which takes it to the day before) I get garbage: 20-mar-12 00:20:00 (syntax: show current_timestamp-10/24). It should say: 19-mar-12 23:40:00
In SQL I get the correct result every time. So, my question is, is this a bug or intended behaviour? If the latter then what is it doing and how can I get it to give the answer I'm looking for?
What I'm trying to do is convert a timestamp from one timezone to another using DML. The NEW_TIME function will only give me what I want if I know whether the "to" timezone is currently in daylight saving or not. eg. Must I use CST or CDT?
The full syntax I'm using to try and achieve my aim is below.
show to_char( to_date( '2012-03-19--15-37-23' 'YYYY-MM-DD--HH24-MI-SS' )-(convert( extchars( tz_offset( 'AMERICA/CHICAGO' ) 3, 1 ) int )/24) 'YYYY-MM-DD--HH24-MI-SS' )
where 2012-03-19--15-37-23 is a user-supplied argument.
I ran the following control file in sql loader:
LOAD DATA
INFILE "gateway.csv"
truncate
INTO TABLE GATEWAY
Fields terminated by ","
Optionally enclosed by '"'
trailing nullcols
[code]....
and I got the following error:
zcyds891:/opt/oracle> sqlldr gwcem/gwcem@pfs control=gateway.ctl log=/tmp/ldr.log bad=/tmp/bad.log
SQL*Loader: Release 9.2.0.8.0 - Production on Tue Dec 7 05:07:59 2010
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL*Loader-350: Syntax error at line 12.
Expecting "," or ")", found "INTERGER".
GATEWAYPROTOCOL INTERGER,
^
The current OS is Solaris, SunOS 5.10.