i have created one varray whose elements are of record type. Now how can i access those record type elements?
structure of table t1:
select * from t1;
IDDESCRIPTION
1a
2b
3c
select * from t2;
ID1DESCRIPTION1
4aa
5bb
1cc
declare
type r1 is record (id t1.id%type);
type r2 is record (id1 t2.id1%type);
type r3 is record (id1 r1, id2 r2);
type var1 is varray(20) of r3;
[code].......
Is there any way that I can check what are the elements present in a pl sql record type by querying in table?
For example if I want to check what are elements present in oe_order_pub.header_rec_type and I don't want to open the package, then in which table I should query? Is it possible?
There is XMLType table with structural storage. Is there a way to make schema validation disabled on some elements of complex type?
It is unpractical to maintain a schema for the element due to high volatility. Ideally it will be stored in CLOB and extracted as is a whole branch without validation, none of the elements under this complex type will be extracted separately.
I want to pass varray of object as out parameter (more than 1 ), Tested the below code getting error.
Note : I want to get value from table and assign it to varray object and pass varray as out parameter.
Here below the code I tested.
create type emp_type as object (
emp_no number,
emp_name
);
create type emp is varray(10) of emp_type;
[code]........
Getting error while above code.
how to convert a record type to a table type?
View 4 Replies View RelatedI have an Type-object typeObj1 that consists another Type-object typeObj2. this def has another Type-object typeObj3. how to access variable declared inside typeObj3. I have syntax below for each Type.
CREATE OR REPLACE TYPE typeObj1
AS OBJECT
(
SYSTEM_IDENTIFER VARCHAR2(50),
PROCESS_TYPE VARCHAR2(50),
abc typeObj2
)
/
[Code]...
/I have tried to access the type-object in where clause in following way
FROM TABLE(CAST(I_typeObj1 AS typeObj1)) ITTPRC,
......
Where
.......
AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM IN (SELECT ADDTN_INFO_KEY_TYP_NM FROM TABLE(ITTPRC.abc)))
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT IN (SELECT ADDTN_RQST_VAL_DT FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM IN (SELECT ADDTN_RQST_VAL_NUM FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
AND (ADTINF.ADDTN_RQST_TYP_VALUE IN (SELECT ADDTN_RQST_VALUE FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
In this way i am able to access the variable inside typeObj3. But problem is i am getting error "ORA-01427 single-row subquery returns more than one row" when i pass more that one typeObj2.
I passed the values like this in proc execution.
T_T_A_I_V := typeObj3('asdasd',NULL,NULL),
typeObj3('String654',NULL,NULL),
typeObj3('abcdef',NULL,NULL));
T_T_A_I_I := typeObj2('CampusCode',T_T_A_I_V),
typeObj2('PlanNumber',T_T_A_I_V);
What i have done is removed typeObj3 from typeObj2, variables defined in typeObj3 are added in typeObj2 then i got ride of above error. is it correct
I want to return the output of this query using one OUT parameter from the procedure using RECORD type or OBJECT type.
SELECT empno,ename,sal FROM emp WHERE deptno=30;
Let us assume the query is returning 50 records.
I want to send those 50 records to OUT parameter using record type or object type.
Script for test:
CREATE TABLE TEST(empno VARCHAR2(4), empname VARCHAR2(50), empstd NUMBER(2))
insert into test values(0001,'A',2);
insert into test values(0002,'B',5);
insert into test values(0003,'C',2);
insert into test values(0004,'D',7);
insert into test values(0005,'E',9);
Now I want to get empno for the particular employees based upon subscript and I have written below
DECLARE
CURSOR cur_rec
IS
SELECT *
FROM TEST;
TYPE cur_type IS TABLE OF cur_rec%ROWTYPE;
v_cur_rec cur_type;
BEGIN
OPEN cur_rec;
FETCH cur_rec
BULK COLLECT INTO v_cur_rec;
[code]....
how to access individial item froma table of rowtype data.
CM: Added [code] tags, please do so yourself next time, see the orafaq forum.
How can I do something like that...It has to be possivel... Not this way, but somehow..
CREATE OR REPLACE PROCEDURE access_reg_column (reg_user user%ROWTYPE)
IS
v_column_name VARCHAR (50);
BEGIN
V_column_name := 'name';
DBMS_OUTPUT.put_line (reg_user.'v_column_name'); ????
END;
I have one requirement. We have a Package which consists of 2 Stored Procedures which has a RecordType output Parameter.
FUNCTION GET_NFE_INFO(O_status_code IN OUT NUMBER,
O_error_message IN OUT VARCHAR2,
O_message IN OUT "OBJ_FM_NFE_DOCHDR_REC",
I_fiscal_doc_id IN FM_FISCAL_DOC_HEADER.FISCAL_DOC_ID%TYPE)
return BOOLEAN is
I am working on a one Stored Procedure which would display the output from the above function as,
set serveroutput on size 9000;
DECLARE
L_stg_status FM_FISCAL_DOC_HEADER.STATUS%TYPE := 'NFE_P';
L_fiscal_doc_id FM_FISCAL_DOC_HEADER.FISCAL_DOC_ID%TYPE := 12325;
L_dummy VARCHAR2(1) := NULL;
L_status_code NUMBER(1) := 0;
L_error_message VARCHAR2(255) := NULL;
L_message "OBJ_FM_NFE_DOCHDR_REC" := NULL;
[Code]..
Here for each and every data value i am Printing it using DBMS_OUTPUT, L_message record has more than 100 columns. Is there a easy way of handling it instead of using DBMS_OUTPUT ?
We have a queue in which the message is coming from external system. The payload of the queue table is a PL/SQL record type. Once we get the message in the queue, we de-queue the message and read through the PL/SQL type collection and process the message.
From the below query, we are able to convert the PL/SQL collection message to XML message and see the data.
SELECT dbms_xmlgen.getxml
('SELECT USER_DATA
FROM <Queue_table> X
WHERE X.USER_DATA.SALE_ORDER.P_HEADER_REC.ORIG_SYS_DOCUMENT_REF=800501298')
FROM dual;
The new requirement is the message would come in a XML message in the queue. So my question is, is there any way through which the XML message can be converted to the PL/SQL record structure directly (it would be the opposite operation of the above query).
I am in the need of using a table type object in SQL query.
I have a package which has a spec in which I have declared :
TYPE TESTREC IS RECORD
(
RE_ID NUMBER(9),
RATING_TARIFF_NAME VARCHAR2(40),
);
TYPE TESTTABTYPE IS TABLE OF TESTREC;
TTR TESTTABTYPE;
In one of the package procedures I am collecting data into the above indicated table type object (TTR):
SELECT
RE_ID,
RATING_TARIFF_NAME
BULK COLLECT INTO TTR
FROM TESTPACKTAB;
This works fine. The values get collected into TTR and am able to print them too.
But when I :
SELECT
AA.RATING_TARIFF_NAME
INTO v_name
FROM
TABLE( TTR ) AA ;
in the same procedure immediately after the collection I get the error while running the procedure :
ORA-21700 : Object does not exist or is marked for delete.
I am using a record type to print some column in a same line.
Eg: I want to create index on some composite key columns. But i dont know how many columns are there. So want to use a loop which will count the number of column and then create the index like:
CREATE INDEX PRODUCT.XIF1AGMNT_PROD ON PRODUCT.AGMNT_PROD(LOAN_ID,LOAN_PROD_STRT_DT) TABLESPACE PRODUCT_INDEX;
I have a problem with passing procedure name dynamically with record type i/p parameter..I'm not attaching any insert/create table statements, as I'm unsure of forming the sql statement dynamically..
CREATE OR REPLACE PACKAGE med_order_pkg AS
TYPE deid_med_order_typ IS RECORD(....)
L_deid_med_order_typ deid_med_order_typ;
PROCEDURE RULE_MASTER_PRC (P_IN_RULE IN deid_med_order_typ);
END;
[code]....
From the above, I need to execute a procedure with record type as i/p parameter..V_SQL should form the statement & execute another procedure which comes into the variable V_MSG_PROC .I'm having difficuly in forming the statement...(I did it by hard-coding the procedure with parameter in the next line which is commented out & it works...So how can I modify V_SQL in the above statement?
using as template this table:
create table t1 (c1 number,c2 number);
CREATE OR REPLACE
TYPE REC IS RECORD (
R1 T1%ROWTYPE,
R2 NUMBER
);
I'm trying to create one RECORD type with all the columns from table T1 + one new field R2. But gives me an error.
The point to use T1%ROWTYPE and not to hardcode the columns from T1, is due to if we add a new column to T1, is created when is executed again RECORD definition and not to add the column.
I need to declare a record type in a package spec and used that define record type as a parameter in a procedure.
A procedure will call this package passing a record type . e.g xxtest.tmpprc(employee_rec employee_type);
(TYPE record_type_name IS RECORD (column_name1 datatype, column_name2 datatype, ...);
CREATE OR REPLACE package xxtest as
PROCEDURE tmpprc(trecordType IN VARCHAR2);
END;
What is functional diffrence between type, %rowtype and record.
View 3 Replies View RelatedI'm not attaching any tables / data..etc...I just want to know how to pass the record type to a procedure (which are actually obtained from a table) -- see ** below where I'm getting an error..Need to pass the whole record type "l_shl_order_msg"
CREATE OR REPLACE PROCEDURE CM_BUILD_MSG_PRC (P_IN_BLD_MSG_CURSOR IN SYS_REFCURSOR,
P_OUT_BLD_MSG_CURSOR OUT SYS_REFCURSOR)
IS
l_shl_order_msg CRAE_INTERFACE.GLB_VAR_PKG.deid_SHELL_order_typ;
V_MSG_SHELL_NAME VARCHAR2(1000);
V_MESG_TEXT_SEGMENT VARCHAR2(1000);
V_TEXT VARCHAR2(1000);
V_MSG_TEXT VARCHAR2(4000);
V_MSG_FINAL_TEXT VARCHAR2(4000);
V_MSG_PROC VARCHAR2(1000);
V_SQL VARCHAR2(4000);
V_CNT NUMBER;
L_STATUS VARCHAR2(100);
L_REASON VARCHAR2(1000);
[code]...
I get an error saying that "wrong number or types of arguments in call to ||"..Not sure how to pass record type dynamically...
I am working on a webservice call from ORacle.I have a button on my form application called verify.Wheni click on verify button , a pl.sql procedure should be invoked and that procedure will call .net webserive to validate the address , the result from the webserivce will be in xml.I have to extract the xml into some variables and return these varibles to Forms application..I am plannig to use pl/sql table to store the result from web service call.
here are the output values:
Customer_Id varchar2(20),
ErrorCode varchar2(30),
ErrorDesc varchar2(3000),
Fcount number,
FErrorCode -- this is array,-- if fcount >1 then these values will be repeted.
FErrorDesc -- this is array,
FStatusCode -- this is array,
FStatusDesc -- this is array,
Street varchar2(3000),
Street2 varchar2(3000),
Suite varchar2(20),
City varchar2(20),
State varchar2(2),
Zip_Code varchar2(10)
create record type and pl/sql table for these.I want to return pl/sql table as a out parameter to the form.
I have two cursors like
cursor_A IS select * from table_a where condition_A;
cursor_B IS select * from table_a where condition_B;
record_A is a recorded of cursor_A%ROWTYPE
record_B is a recorded of cursor_B%ROWTYPE
I define a procedure like pro_A(record_in cursor_A%ROWTYPE) can I overload this procedure by defining pro_B(record_in cursor_B%ROWTYPE)?
If I can't, Can I call pro_A by passing record_B as the parameter to it?
I'm trying to execute a dynamic sql that calls a function. But that function has inserts and deletes inside and this way it can't be called through a select statement. And to be worst, it has an other problem, my function uses a record type as parameter.
My code (sample):
-----------------
DECLARE
type r_parameters is record
(cd_query cons_query_param.cd_query%type,
cd_usuario cons_query_user.cd_usuario%type,
nr_param cons_query_param.nr_param%type,
vl_param varchar2(2000),
[code].....
Getting error when using record type as in parameter.
PLS-00306: wrong number or types of arguments in call to 'SAL_UPDATE_PROC'
PLS-00302: component 'ENAME' must be declared
PLS-00302: component 'SAL' must be declared
CREATE OR REPLACE PACKAGE emp_details_proc
[code]....
I am not getting any error.
Is there a way we could define a record or a nestedtable with a type based on weak refursor i.e
TYPE RC IS REF CURSOR;
C2 RC;
Type t is table of c2%rowtype;
Following is some more explanation of what I am trying to do.
I have a table T with column A and B. Column A is a primary key with number 1,2,3,4,5,6, Column B has diffrent sql stmts stored. i.e 'Select * from emp', Select count(1) from dept' and so on. So table will look like
1 Select * from emp
2 Select count(1) from dept
Now I want to select statements stored in table T one by one and execute them by using cursor. Problem arises as i need to fetch the cursor into some variable but the outcome of each statment is diffrent and oracle does not allow to use cursorname%rowtype for a weak ref cursor.
I have a collection of objects built in a PL/SQL program.
I want to keep only the distinct elements of this collection for the rest of the program.
I failed to find the correct way to do it
For instance (the actual object is far more complex containing object attributes itself), with the following types:
drop type t1b
/
drop type t1a
/
create or replace type t1a as object (
v1 integer,
v2 integer
)
/
create or replace type t1b as table of t1a
/
I have the following variable:
v t1b := t1b(t1a(1,2),t1a(1,2));
And I want to get only one "t1a(1,2)" in my collection.
My first idea (actually the second one but it does not matter) was to use DISTINCT:
SQL> declare
2 v t1b := t1b(t1a(1,2),t1a(1,2));
3 begin
4 select distinct t1a(v1,v2) bulk collect into v from table(v);
5 dbms_output.put_line(v.count);
6 end;
7 /
declare
*
ERROR at line 1:
ORA-22950: cannot ORDER objects without MAP or ORDER method ORA-06512: at line 4
As I said the object is far more complex and builting a MAP function is quite tedious (but I will do it if there is no other way).
The next idea was to use multiset operators:
SQL> declare
2 v t1b := t1b(t1a(1,2),t1a(1,2));
3 begin
4 select v multiset intersect distinct v into v from dual;
5 dbms_output.put_line(v.count);
6 end;
7 /
1
PL/SQL procedure successfully completed.
This works well but I suspect this is not the correct way and there is one to do it in PL/SQL but currently failed to find it.
I need to count number of elements in the same catagory of an array.. For example, an array consists of {'a','b','c','c','a','d','c'} means, i need to display like a=2, b=2, c=3, d=1.
I have written the below code.
declare
type array_val is varray(10) of varchar2(15000);
counter number:=0;
SMQ_NAME ARRAY_VAL:=ARRAY_VAL();
begin
[code]....
But its not showing exact output as my requirement..
I have a one column table that store lists of elements :
create table test_table (c1 VARCHAR2(4000));
insert into test_table values ('1,23');
insert into test_table values ('1,2');
insert into test_table values ('3,4,5');
[code]...
The output column would be something like that:
output_column
1,2,7,23
6,9,0
3,4,5
I'm grouping columns that have at least one element in common.
(1,23) and (1,2) merge into : (1,2,23)
(1,2,23) and (7,2) merge into : (1,2,7,23) --> Output
(6,9) and (9,0) merge into : (6,9,0) --> Output
(3,4,5) and (5,5) merge into : (3,5,5) --> Output
I have made this logic using only PL/SQL, with loops and nested tables using function memberof, but I suppose that there is a way to improve the performance using only SQL.
PROCEDURE test_data(
)
IS
TYPE test_tab IS TABLE OF NUMBER(15);
t1 test_tab;
BEGIN
I have missing elements in a collection that should be reported to the terminal while running the procedure
IF t1.COUNT > 0 THEN
RAISE_APPLICATION_ERROR('Missing Elements: ' || elments from collection t1);
How can I raise an exception with all the missing elements from collection t1 here?
END IF;
END;
When I invoke SOAP Web-Service using APEX_WEB_SERVICE.MAKE_REQUEST, then I'm able to get response from web-service. However all German character are replaced by JUNK data. However data is coming fine when I test web-services using SOAP UI.
I tried to invoke web-service using UTL_HTTP. However when I use UTL_HTTP, then I'm getting following error.
ORA-24247: network access denied by access control list
<li> Why German characters are replaced by Junk data while invoking web-service from APEX, while it's working fine from SOAP UI
<li> When I can access web-service successfully using APEX_WEB_SERVICE, then why it's throwing ORA-24247 error when I call using UTL_HTTP?
DB: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
APEX: 4.0.2.00.07
Web-Server: EPG
SELECT * FROM NLS_DATABASE_PARAMETERS;
[code]...
I need to take the distinct values from VARRAY.. I have wrote following simple example. But it does not work. how to get the distinct value from VARRAY.
declare
type t is varray(10) of varchar2(10);
t1 t;
type r is table of varchar2(10) index by binary_integer;
r1 r;
begin
t1 := t('A','B','A','B','A','B','C');
select distinct * into r1 from table(select * from t1);
END;
Iam passing the varray to cursor as show below.
type t is varray(50) of number;
t1 t;
cursor c1(t3 t) is select name from temp2 where id in(t3(1),t3(2));
name1 varchar2(20);
begin
t1 :=t(501,384,3242,106);
[code]......
my question varray size is 50, while creating the cursor i have to pass the 50 values like t3(1),t3(2).....t3(50). I have tried to use t3.first..t3.last in IN condition but throwing some error, any other method/hints to pass the values dynamically to cursor IN condition.