Is it possible to replicate table data on real time from sql server (2005 32 bit or sql server 2000 32 bit)to oracle 10g running on linux 64 bit? If yes then what are the steps.
It will be one way replication from sql server to oracle. Which option is best sql server dts or Oracle Stream replication to replicate table data.
Actually am trying to replicate two db servers from one in hong kong and another in china. when am trying to establish the replication, am getting error 'ORA-04052: error occurred when looking up remote object' like this...
but the same way i have tried in my local network, it is working fine.i have tried schema replication through enterprise manager grid control..
what are the recommended network requirements for implementing Oracle Multi Master replication.
View 1 Replies View RelatedI need to do a Oracle replication between databases. One resides on Oracle 8i which needs to be replicated to a database on Oracle 10G.
Is oracle replication supported between dissimilar versions of Oracle?
I want to configured A Synchronous replication in oracle 8i. Noe using GUI i am bale to create replication but whatever i modify it remain in the transaction i have to manually run the job ,
I also tried to configured continuous asynchronous configuration by setting delay rate 500000. but it was also not working.
i need to set up a central server with all the master tables and two other local database which will hold the updatable materialized view of the master table...the databases must be synchronized with central server..and user will work on the materialized view database...
View 10 Replies View RelatedI want to set up advance replication for 3 master site (multimaster) I created 3 master site named orc1,orc2,orc3 and followed up oracle replication management of API book instruction I created 2 tables(tes1,test2) in hr schema in all 3 master site with the same data. then I created the following steps
1-CONNECT repadmin/repadmin@orc1
2-Create the master group named hr_test_repg
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPGROUP(
gname => 'hr_test_repg');
END;
/
4-add tables test1 and test2 to the group
BEGIN
DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
gname => 'hr_test_repg',
type => 'TABLE',
oname => 'test1',
[code]....
I could create DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT for test2 but not for test1 and it produces error
RROR at line 1:
RA-23309: object hr.test1 of type TABLE exists
RA-06512: at "SYS.DBMS_SYS_ERROR", line 105
RA-06512: at "SYS.DBMS_REPCAT_MAS", line 2552
RA-06512: at "SYS.DBMS_REPCAT", line 562
RA-06512: at line 2
I have one 10g database in other country. I want part of their db (selected tables or tablespaces) and import that data to my 10g DB and i want keep to date this data.
I know two ways
1. Data Pump Imp/Emp via FTP, but i can't send only data that have changed (incremental), i must pumping whole selected part of database (i want only new data from their DB, but consistanse with my DB)
2. RMAN etc. or other archivisation tool, i can do incremental achivisation, but can i send files to another instances (my db) and load only that data? Can i do that with SQL*Loader?
For using replication in our production, here i am testing golden gate as replication tool. I tested all scenario in Uni direction ( source to destination). Now have to test replication with DDL support in Bi-Direction. Not getting any Doc for doing replication in Bi-direction( Two Way). If any one has done the same, then please share limitation of replication in Bi-direction through Golden Gate.
View 7 Replies View RelatedI have 8 databases in a multi master replication. I want to refresh the tables in the replication.
View 3 Replies View RelatedI Have configured the replication between two database's at table level. After few miniuts of successful configuration of replication between two db's at table level, I am getting the ORA-00001: unique constraint (%s_PK) violated error in dba_apply_error.
I checked constraint name,type and status on table replicated is same on both source and destination db.
I am implementing one-way replication between 2 databases.
Do people leave the target database in archive-log mode? Do they backup the target database?
how to using GoldenGate between MS SQL Server 2000 and Oracle 10g?
i want the two database have the same data,how can i configuation the GoldenGate?
Can U provide some documents for me?
How can i make replication at one way For destination only. Not for destination and target.
View 5 Replies View RelatedI am using prebuilt MV to perform replication of about 300-400 master tables from one database to another database. I am wondering about the impacts on triggers in general replication.
IS there a general rule to enable/disable a trigger before a refresh.
We have two ORACLE-Standard-Edition installations, one is installed on a machine in our production department and one is installed on an central server. We want to replicate the data from the production-DB to the central server to backup the data on tape drives.
Is this possible using the feature of standard edition?
I need to set up replication between three 10g R2 databases.There will be one main database where the data will flow into two small databases. A little bit of information will flow back from these smaller databases into the main one.
I have been asked to evaluate ODI as an option. Unfortunately I cannot use Golden Gate due to the cost.I've had a play with ODI and it looks like it's all done on a GUI where I would much prefer to be using command line scripts for setup and monitoring.
It also looks like ODI is more geared to integrating data from many different sources but I'm just going from Oracle to Oracle so don't know if it's a bit overkill.
I'm thinking of just looking at CDC which I can set up with scripts and looks to be the basis behind ODI anyway (when it comes to taking data from Oracle) - again. I may even go down the streams route that I have used before.
I need a 2-3 TB storage server group for Oracle Database. We want SAN Storage & Server for Oracle Replication, but not Microsoft Storage Server.
For example : HP DL380 G6 as a server and EMC CLariion CX4 120 as a SAN Storage etc...
We have an option, but want some others. What do you recommend for a Server & for SAN Storage (Make & Model) to use for Oracle Replication?
Can I do replication between Oracle 10g and 11g?
The Oracle 10g running on windows xp and oracle 11g running on windows 7.
I am planning to move the databases in multi master replication from HP-Ux to AIX server. I am planning to use export/import to moving the database. But do I need to drop the replication administrator user before I do export/import?
View 1 Replies View RelatedAre there any recommendations to replicate oracle tables from 10.2.0.4 to 9.2.0.6 ?
I am new to oracle, thinking about streams and material views. And not sure which option should we choose ?
Any pros and cons (especially related to the versions). Can I use streams to replicate 10.2.0.4 to 9.2.0.6 ?
Am trying to implement Oracle Streams Replication (Using Metalink Note 733691.1).I have configured the steps, but in my alert log am getting the below error:
Check that the primary and standby are using a password file and remote_login_passwordfile is set to SHARED or EXCLUSIVE, and that the SYS password is same in the password files. returning error ORA-16191
am successfully able to connect db's both server
From 1st server
sqlplus sys@2nddb as sysdba
From 2nd server
sqlplus sys@1stdb as sysdba
while conning it is asking for password
Both DB's are created with Same Oracle sys user password. after this disabled case sensitivity , still the error persists.
We have Transactional replication setup between SQL (publisher) to Oracle (Subscriber). Every other week replication will stop and when i look at sql error logs i see the message 0ra-01722. We have engaged microsoft to have a look at this problem and their conclusion is that everything in sql is setup correctly. The dba's managing oracle have as said there are no error messages on their logs. I have compared the datatypes of the table in sql and oracle and everything matched except for the one highlighted in yellow(see attachment). how we can figure out why we keep getting this ora-01722 message.
View 4 Replies View Relatedwe have four location, four database server separately, we need to synchronize all the servers.
for example. all the server having table parts. if the parts_count column change in server. it should be change all the four servers.
I told about Oracle multi master replication below.
Can I replicate some objects of "X" schema at A server to "Y" schema at B server using MM replication?
We need to transfer data from oracle 10g to Oracle 9i in the following condition.
There will be two database server , one is online server where online user fill the form which is generated by java, spring , hibernate and using database 10 g. at day end i need to execute a process that transferring data from online server to offline server that is in oracle database 9i. This process is scheduled. Some security reason client do not kept this two database on same network. My challenge is that transfer data from online server to offline server with applying client security norms.I have option like:
1) Using Oracle replication method, creating materialized view on remote server , refreshing it at regular interval. but database connectivity is not contineous, should i go for that ?
2) Write java application on intermediate server where we write process to get the connection of this two database servers. From java application we call the procedure for selecting data from Oracle 10g and insert into oracle 9i database and using flag on both data to identified how many rows are transfered and how many remaining for trasfer.
Issue 1: I have rdbms version 10.1.0.4.0. There is a replicated environment with 2 nodes for oracle database and the state of the node is standby when this issue occurs. We are getting ORA-0600/ORA-07445 causing instance failure over a period of time.
Few common errors are listed below
Errors in file /data1/dump/bdump/optical1_j000_7235.trc:
ORA-00600: internal error code, arguments: [kglpnal_1], [0x3A80C7878], [], [], [], [], [], []
Errors in file /data1/dump/udump/optical1_ora_834.trc:
ORA-00600: internal error code, arguments: [kcbgtcr_6], [1], [], [], [], [], [], []
Tue Apr 16 13:00:06 2013
ORA-07445: exception encountered: core dump [ksuxds()+5548] [SIGSEGV] [Address not mapped to object] [0x000000148] [] [].
Issue 2: I am not able to attach a single file of txt type which is less than 2048KB.As soon as I press upload File button after browsing, it disappears.
Any experience before on Oracle 11gr2 RAC to RAC via EMC SRDF setup?
View 5 Replies View RelatedWe are using Oracle 10g rel 2. The replication is setup on 1 server which is in City A, and the snapshot server is in City B.
City A .
Create materialized view log on table-a
with primary key
including new values.
City B database.
Create user test_rep identified by test
grant connect, resource, create any materialized view , table, view , procedure to test_rep.
Create materialized view city-A_db_MV
refresh fast
select * from cityA.Tablea@city-Adb
When i select from city-A_db_MV, it showed the complete table-A of city-A database.
Now if we make any changes to City-A table at the Master site, will it be propagated automatically to the MV site.
I guess we need to create jobs to push / or refresh fast .. isnt it. But exactly how to do it is a question.
Secondly if we make a replication group at Master site at city-A db, how do we refresh that Group and how to monitor whether it is refreshing on time or not? do we need to see the jobs every now and then.
but still a lot of questions unanswered, even though i had read the documents earlier.
1-The MView was created without identifying that after what interval it will be fast refreshed.
2- How to Manually refresh it. Does it support On Commit, I think it is not.
3- Where should be we make a group and then add the table to that group and refresh that group.
Should this group belongs to the Master Site or to MV site?
I have problem with my Replication using oracle 9i.It does not push transactions automatically when refresh time comes but it works fine when pushed manually.I have two sites:
1- Master
a-Master group
2- Materialized view site
a- Materialized view group (Asynchronous)
b- Materialized view with refresh occur automatically on future date every 5 minutes
c- refresh type FORCE.