I have DB on cluster and it set to active/active. ASM disk currently using raw device and connect to SAN storage. So i want to add new ASM disk on current environment.
Does oracle have this doc? What i can see from their said just show adding new ASM to new installation. Does it same as adding new ASM disk to current system? Does it success on implementation?
We have a Production Oracle 10g R2 RAC on HP-UX v2 IA64 servers.We have Two Disk Groups one for Archive (ARC_DISK - 100 GB) and other for Database(DATA_DISK - 1 TB]. We wanted to add more space to the DATA_DISK disk group.Unix admin configured 200 GB from SAN and changed the ownership of the Disk to oracle and permissions to 775 on 1st Node.I opended DBCA from 1st Node and was able to see the disk in 'Show Candidate'.
I added this disk to the DATA_DISK disk group and clicked OK but got ORA- error with some message like some operations could not be performed. I exited DBCA.We realized that we had forgotten to change the ownerhip and permission from the 2nd Node.Unix admin changed the ownership of the Disk to oracle and permissions to 775 on the 2nd Node.
I opened DBCA again from 1st Node and selected the DATA_DISK disk group but could not find the Disk in 'Show Candiate' open. I clicked on 'Show All' and this disk was shown with Header_Status - MEMBER but not allocated to DATA_DISKGROUP. When I clicked the 'Show Member' option, this disk is not shown for DATA_DISK disk group. I exited DBCA at this point.As this is a critcal Production database I didnt proceed any further and exited DBCA.
Now I need to add this Disk to the DATA_DISK disk group but not sure which option to select. I got one reply from another forum to run DBCA select the DATA_DISK Disk Group and then click 'Show All' and select this Disk (which already has MEMBER as Header Status) and select Force Option and click OK to continue.
I checked and found we have disk that is assigned with 0 disk GROUP_NUMBER. What does that mean ? how to check if disk T1_ASM05 is been part of any disk group or not.?
SQL> select GROUP_NUMBER,NAME from v$asm_diskgroup;
GROUP_NUMBER NAME
------------ ------------------------------
1 DATA
2 FRA
SQL>
SQL> select GROUP_NUMBER,name,PATH from v$asm_disk;
GROUP_NUMBER NAME PATH
------------ ------------------------------ -------------------------
1 T1_ASM01 ORCL:T1_ASM01
2 T1_ASM02 ORCL:T1_ASM02
0 ORCL:T2_BACKUP01
0 ORCL:T1_ASM04
0 ORCL:T1_ASM03
0 ORCL:T1_ASM05
6 rows selected.
SQL> !
/home/oracle > /etc/init.d/oracleasm listdisks
T1_ASM01
T1_ASM02
T1_ASM03
T1_ASM04
T1_ASM05
T2_BACKUP01
/home/oracle >
I am installing Oracle Grid Infratructure 11.2.0.3 on OEL 6.3...I reached the final step, running the root.sh on node 1. It succsessfully started the services but then I got this error:
Failed to create voting files on disk group OCR_VOTING.
Change to configuration failed, but was successfully rolled back.
CRS-4000: Command Replace failed, or completed with errors.
Voting file add failed
Failed to add voting disks at /opt/oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 6780.
+/opt/oracle/11.2.0/grid/perl/bin/perl -I/opt/oracle/11.2.0/grid/perl/lib -I/opt/oracle/11.2.0/grid/crs/install /opt/oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed+
OCR_VOTING Diskgroup is configured using oracleasm:
oracleasm createdisk OCR_VOTING /dev/sdb1/dev/sdb1 is a partition and has been created ot the LUN /dev/sdb using fdisk.
Here is part of logfile of the root.sh - tool. Meanwhile I tried deinstalling the clusterware and cleaning up, then I verified the server configuration with cluvfy and all was OK.
+2013-01-04 00:24:26: Start of resource "ora.crsd" Succeeded+
+2013-01-04 00:24:26: Creating voting files+
2013-01-04 00:24:26: Creating voting files in ASM diskgroup OCR_VOTING
2013-01-04 00:24:26: Executing crsctl replace votedisk '+OCR_VOTING'
2013-01-04 00:24:26: Executing /opt/oracle/11.2.0/grid/bin/crsctl replace votedisk '+OCR_VOTING'
2013-01-04 00:24:26: Executing cmd: /opt/oracle/11.2.0/grid/bin/crsctl replace votedisk '+OCR_VOTING'
[code]....
We have 2 servers running Oracle 11gR2 Window server 2008 64 bit RAC. Today I add new shared disk visible from both servers. All our data placed on ASM partitions, but we need Windows volume for exchanging some data between servers & users;Actions:then i have prepare disk on shared storage from 1st node, run diskmfmt.msc & rescan disks when windows recognizes new hdd, initialize it.create an Extended partition & Logical drive & Assign drive letter. from another nodes, make sure no drive letter is assigned.
Sometimes Windows automatically assign drive letter. If drive letter is assigned, right click & Change drive letter & Remove. from 1st node, format this logical drive using ocfsFormat.exe after execute below scripts i have face some issues
E:app11.2.0gridcfs>ocfsformat /m P: /c 1024 /v DATA /f /d /aReg Get Cluster Name(): Reg Query ValueEx for CFS_CLUSTER_NAME failed with error 203
This indicates that the Cluster Name has not been configured on this node for OCFSThe volume formatted in this condition will be seen by all nodes running OCFS.
I have 11.1.0.7 instance running and got more 300G of storage available for the database. I would like to know what are the steps to add these disks/storage to the existing DATA asm disk group?
View 5 Replies View RelatedWe are about to undertake a storage migration of our RAC environment from EMC to XIV storage.
The migration method we are using means that we will be presented with identical disks post the migration, however the UNIX paths to the disk devices will be changing. Using our migration method it is not possible to present the old and new devices at the same time.
Therefore once the migration is complete i need to update the device configuration to reflect the new paths. I believe this is done using the following techniques but I am unsure as some of the documentation is ambiguous and I have not done this before
Changing path to Voting Disks
crsctl add css votedisk <new_path_to_disk> -force
crsctl delete css votedisk <old_path_to_disk> -force
Changing path to OCR Disks
ocrconfig repair ocr <new_path_to_ocr>
ocrconfig repair ocrmirror <new_path_to_ocrmirror>
Changing paths to ASM disks
alter system set asm_diskstring='<new_device_path>' scope=both;
Tell me that in Oracle 11g, information regarding voting disk location is stored in which file ?
I know that we can use "crsctl query css votedisk" to see the location of voting disk, but from which file or place this command pick the information ?
Recently, I'm encountering the ORA-01654 error. I did some research and found out that I need to extend or add new datafile for that tablespace.
I'm working in RAC environment with ASM enabled.
My question is
-Do I need to restart the DB after making the changes?
-Do I need to execute the commands on both nodes?
I am getting below errors on one of the node of my RAC server while starting the database. how to get the rsolution.
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Solaris-AMD64 Error: 5: I/O error
Additional information: 4
Additional information: 331776
Additional information: -1
Thu Aug 1 22:29:42 2013
Errors in file /software/oracle/admin/dixie/udump/dixie1_ora_23644.trc:
ORA-00202: control file: '+DGDIXIE/dixie/controlfile/current.265.647198019'
[code].....
I Configured an ASM instance and a disk group with two disk for normal redundancy.
> Here .. each disk is 2gb
The disk group has two disks...
SQL> select group_number, name, type, total_mb, free_mb
2 from v$asm_diskgroup;
GROUP_NUMBER NAME TYPE TOTAL_MB FREE_MB
------------ ------------------------------ ------ ---------- ----------
1 DATA NORMAL 4000 3898
as the group has two way mirroring (Normal redundancy) How much data (2 GB or 4 GB) can i keep in the disk group? My conception is I can keep 2 GB data in the disk group... (as the disk group keeps every extent in another disk as mirror)
I have 2 servers both having windows server 2008 64 bit as operating system installed on both I need to install oracle clusterware 11g r1 on both servers with clustering on external storage. I have configured the network(private,public and virtual) for both servers and have started the installation.
In the installation of oracle I add both servers but then I reach to a point where they ask me for voting disk or ocr disk in the cluster configuration storage but no disk is present how can i create ocr disk or voting disk on windows server 2008? And the external storage should I buy a special type of storage that supports clustering to continue my work?
Is there any way to add one disk group space to another disk group. Because One of my disk group is full i want to add space in to that group.
View 1 Replies View RelatedLets say I have an oracle setup on C: and I decided to delete the oracle in c: and setup a whole new oracle at E: but I want all the data migrate to the new oracle installation in E: How can I perform that?
View 1 Replies View RelatedI am having the following table and values.
A | B
=====
1 | 1
2 | 2
3 | 3
4 | 4
5 | 5
I need an output in following
A | B | C
=========
1 | 1 |
2 | 2 | 3 --> 1+2
3 | 3 | 6 --> 3+3
4 | 4 | 10 --> 6+4
5 | 5 | 15 --> 10+5
I mean add the first row of column b with second row of column ==> this output need to show in column c
again this output need to add with third row of column b .......
any sql commands / keywords for this
I have a question about the ADD VOLUME command, I can't understand the difference between ADD DISK and ADD VOLUME.What are the difference between them?When should I use each one?How can I control the stripping and mirroring (NORMAL and HIGH) adding VOLUMES in a DISKGROUP?Can I add a volume to a fail group?
View 1 Replies View RelatedI'm trying to create a ASM disk using oracleasm.I created list the disk (using oracleasm), but the view V$ASM_DISK and ASMCMD (lsdsk command) can't see it..Look:
CODE$ oracleasm createdisk DISK3 /dev/sdc1
Writing disk header: done
Instantiating disk: done
CODE$ oracleasm listdisks
DISK1
DISK2
DISK3
Looks fine, but the ASMCMD doesn't listing it...
CODEASMCMD> lsdsk
Path
/dev/oracleasm/disks/DISK1
/dev/oracleasm/disks/DISK2
And the V$ASM_DISK can not...
CODESQL> select name from v$asm_disk;
NAME
------------------------------
DATA_0001
DATA_0000
We have a new implementation which will be using ASM with RAID. The data area needs to be 3TB, and the recovery area, to be used for archive logs and RMAN backups, needs to be 1TB.
The configuration i'm thinking about now is:
+DATA diskgroup: 5*600G disks, using RAID 1+0 (this will include control files)
+FRA diskgroup: 2*500G disks, using RAID 1
+LOG diskgroup: 2*1G disks, using RAID 1 (this is only for redo logs)
So here are my questions:
1. Am I right in supposing that we would get the best performance on the +FRA and +LOG diskgroups by not using RAID 1+0?
2. It has already been agreed to use RAID 1+0 for the +DATA diskgroup, but I can't see the added benefit of this. ASM will already stripe the data, so surely RAID 0 will just stripe it again (i.e double striping the data). Would it not be the better just to mirror the data at a hardware level?
I just made the swich to have my RMAN backup directly to tape and here are the parameters I have set.
CODECONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
[code]...
When I do an active clone I need to set my parameters back to the following in order to makeit work.
CODECONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
[code]....
Instead of un-doing my RMAN TAPE settings, is there something I can do in my active clone script to tell it read/write from/to disk instead of tape. I tried allocatiing disk channels but was unable to get my script to work. The only way it worked was to back out all the tape settings and put everything back to disk.
CODErman catalog=rman/rman@prod target=sys/sys@prod << EOT
connect auxiliary sys/sys@dev
duplicate target database to dev from active database nofilenamecheck
pfile=/u01/app/oracle/product/11g/dbs/initdev.ora;
exit
We are running oracle 10g on a solaris system. We were taking the backup to the tape system previously. But the tape system is broken due to some reasons and cannot be used now. Now I am trying to take a rman full backup with archivelog to a NFS disk. The server in which the NFS disk lies is in Ubuntu. I have also considered that there is some problem with the NFS rman backup but can be solved by using hard and noac while mounting. Now I wanted to know is, what parameters should be changed to direct the backup sets to the new location in NFS instead of the old disk ? Do I need another media manager as in tape?
View 4 Replies View Relatedhow do I add a column to an existing table which when rows are added to the table this column will have the same default value?
alter table thetable add (new_column_name varchar2(100) default bbubu);
I've been trying to write some code to add a column if it does not exist as the code will be run numerous times and will be parameterized in other software to run across multiple tables.
Here is what I have made so far:
DECLARE
COLEXISTS integer;
vCmdStr varchar2(4000);
[Code]....
I can't figure out where the invalid character is.
I have a table with zip codes and their plus four values. For ex: zip code of 10000, which has corresponding plus four values of 001, 002, 003, and 008, 009, 010. The issue is just that--a zip code can have sequential plus four values, and then it will skip several potential plus four values, and then start again. I would like to assign a low plus 4 value and high plus four value to a zip code, keeping in mind that the plus four values are not always sequential. So, it would be similar to this:
zip plus4 low plus4 high
10000 001 003
10000 008 010
I had created a table which have 100s' of entries in it.
create table reg_user
(
USERNAME VARCHAR2(50),
PASSWORD VARCHAR2(20)
)
***
[Code]..
1. In this table, how to update the Nth row, how can I do it
2. Now I need to add USERID in this table,which will get value from 1 to max no. of rows. I do not want to drop the table and again re create it adding USERID or update each row manually. Is there any other way to add USERID and have IDs from 1 to max IDs.
select bill_no from bill_mst is showing 25 records.
select bill_no from bill_mst order by 1 is showing 5 records.
I am trying to run an SQL query which refers/joins around 10 tables.In my case I would want to add an if-else or case condition in the WHERE clause of select query
For example
select a.column1, b.column1, c.column1, d.column1
from a, b, c, d
WHERE a.column2 = b.column2
AND (if a.column3 = 10 then ( I want 2 conditions to be
AND b.column2 = c.column2) added
else after WHERE clause as AND...)
AND b.column2 = d.column2
)
AND d.column2 = a.column2
I have created the below trigger in Oracle to ensure that a value in a table remains at 180 but I need to restrict this to one row in this table. Is there a way to use an IF statement or a where clause of some type for a particular row in that table? The Row is called ADMIN. Triggers weren't covered in my course so only know a few basic statements.
CREATE OR REPLACE
TRIGGER DAYSAGO_trg
BEFORE UPDATE ON days_ago
FOR EACH ROW
BEGIN
:NEW.days_ago := 180;
END;
When I added a new node to RAC (existng 2 windows server 2008 R2 nodes), using the command,
CODEaddNode -silent
"CLUSTER_NEW_NODES={node3}" "CLUSTER_NEW_PRIVATE_NODE_NAMES={node3}"
"CLUSTER_NEW_VIRTUAL_HOSTNAMES={node3-vip}"
the output was "The cluster node addition <path> was successful".
But when I tried the following command,
CODEcluvfy stage -post nodeadd -node3
I got an error stating
QUOTE "ERROR: Shared resources check for node addition failed
The following node is not in cluster: node3
Post-check for node addition was unsuccessful on all the nodes."
When I checked the inventory logs, I found the following entry
QUOTE SEVERE:
oracle.sysman.oii.oiix.OiixException: The Oracle home '<path>' could not be updated as it does not exist.
at oracle.sysman.oii.oiic.OiicBaseInventoryApp.getOracleHomeInfo(OiicBaseInventoryApp.java:645)
at oracle.sysman.oii.oiic.OiicUpdateNodeList.doOperation(OiicUpdateNodeList.java:206)
at oracle.sysman.oii.oiic.OiicBaseInventoryApp.main_helper(OiicBaseInventoryApp.java:790)
at oracle.sysman.oii.oiic.OiicUpdateNodeList.main(OiicUpdateNodeList.java:399)
Can we add 10000 days in SYSDATE using + operator ?
Quote: This I can test it but I don't have database access now that's why I am asking this question
view the below select statement..why it's adding extra zero's...
select to_timestamp('2001-05-22 12:00:18.600','YYYY-MM-DD HH:MI:SS.ff3AM') from dual
output: 5/22/2001 12:00:18.600000000 PM ---why it's adding extra zeors's
my output should be as " 5/22/2001 12:00:18.600 PM"
