How do I limit my query to show the information from REQUEST but only where the all of the wips associated between REQUEST and WIPS are not in the SHIPPING table. For example, the SHIPPING table has all of the WIPS that have been shipped, I only want to show the REQUEST rows where all of the WIPS have not shipped.
The structure is like this may contain multiple records like Comp_id, Comp_name, ISIN will be same, but column_name will contain the column_name to which its corresponding column_value needs to be populated to.
I am working on Pro*C and i have a requirement where i need to select all the rows from a table into a c - structure variable. Since i get to know the no of rows in the table which is getting selected only at run time, i need to create a pointer variable to the structure and i'll allocate the size to it based on the count of rows in the table using malloc or calloc.I tried allocating memory using calloc and it does not show any error. But when i when the exec select statement run it shows an error.
Statements i have used: struct common *comp; struct common_ind *comp_i;
how can I select whole table in parts of 100 rows?
If I have primary key I can:
CODEstart=0; end=100; select * from table where ID>=start_point and ID<end; start=end; end=end+100; and repeat: CODEselect * from table where ID>=start_point and ID<end;
How can I do it without primary key? Is there another posibility to getting 100 number of rows? Maybe using rowid?
I have a form in which the user selects values above from a LOV and then selects a run query button which then uses the values selected in the LOV to refine the query and output the appropriate values.
What i have done in the pre-query trigger is: (the block i am querying is called cars where the block i am selecting values from the LOV is called selection)
:cars.make := :selection.make; (repeated for other fields)
this worked fine untill i introduced a from and to date in my form in which i passed the data through to the query like this:
declare v_dates_between varchar2(1000); begin v_dates_between := 'reg_date between ''' || :selection.from_date || ''' and ''' || :selection.to_date; Set_Block_Property( 'cars', DEFAULT_WHERE, v_dates_between ) ;
Now i have added the above bit of code the from and to date work fine, but when a car make is selected it still bring back every car make and not just the one selected.
is it possibly because i am setting the where clause in the block property? perhaps i need to now incoperate my other selections into this where clause? are the two blocks exclusive to eachother? and if i put the whole code into the block property I assume i will get problems. E.G. the user leaves a selection criteria blank (if they want to query all car models they wouldnt select one from the list) i assume the query would only return back values which contain no car model which would be 0 records.
I used Region, Process by to search the report which appears as shown above. Then I use Choose Auditors column to select my Auditor and copy paste it into the report under To be Audited By col. Is there a way to automate the process. I am here using a tabular form in APEX. My main aim is to assign auditors based on Region, not equal to Processed by.
Oracle 11gI have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company. I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information. select records from this 125 million record table to insert into the smaller table.
I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches. My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause? My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market asWITH got_pairs AS ( SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no , ROW_NUMBER () OVER ( PARTITION BY l.address_key ORDER BY l.hh_verification_date DESC ) AS r_num FROM t3_universe e JOIN t3_universe l ON l.address_key = e.address_key AND l.zip_code = e.zip_code AND l.p1_gender != e.p1_gender
I'm selecting a set of records from one table, for example: ID, description and date. From this I'm only wanting the latest inserted row. I've used the max function on the date which is fine, however, there are some records that have had their description changed. This then returns two values for one ID, the max for the original description and the max for the changed description.
CREATE TABLE ID_comments ( ID CHAR(10 BYTE) NOT NULL, S_COMMENTS VARCHAR2(255 BYTE), P_COMMENTS VARCHAR2(255 BYTE), C_COMMENTS VARCHAR2(255 BYTE) );
For each Id, I can have multiple records.
Below is the insert script of one of the ID:
Insert into ID_comments values ('0813654254','','JR/0813653606 single',''); Insert into ID_comments values ('0813654254','','JR/0813653606 single',''); Insert into ID_comments values ('0813654254','','JR/0813653606 SINGLE',''); Insert into ID_comments values ('0813654254','','JR',''); [code].......
Now I want to select only one record from this table for an ID, which will have "not null" values for s_comments,p_comments,c_comments columns. If for some ID , there is no "not null" row for any column, then pick up the "null" row/value for that column.
I'd like to get all rows for one particular id. I have data stored in two different tables. I'd like the values to be "denormalized" such that for each unique date I want the values(washer_val, widget_val) for each id from each table to be displayed(or null if no data for that date).
I've created two different example views("tables") of my data with a "with" statement(washers, widgets). I tried to denormalize each set of data (washers_val, widgets_val) and then get all the unique dates (unique_dates). I then join the "views" and display all possible rows with their data. This is the type of output I want BUT is there an easier way to achieve it??
with washers as (select 1 id, trunc(sysdate) event_date, 1 val from dual
I want to get the values and put them into html template since i want to configure mime settings. My table's name is rawticket_voip and it has 150.000rows and 20 columns so instead of COL1, COL2 what should i write there? How can i get the spesific row's and column's value and how can integrate loops in this html?
TABLE_A ------------------------------ ID DEPT CRS ------------------------------ 1 CS CS_100 2 SCIENCE SCI_150 3 MATH MATH_400 4 HISTORY HIS_110
[Code]...
To display CRS from TABLE_A where DEPT = 'MATH' but in the following format.,
-------------------------------------------- NO DEPT CRS -------------------------------------------- 1 MATH MATH_400, MATH_550, MATH_230 --------------------------------------------
instead of., -------------------------- NO DEPT CRS --------------------------- 1 MATH MATH_400 2 MATH MATH_550 3 MATH MATH_230 ---------------------------
I have two tables which have identical schemas, one table (tbl_store) is used to hold the latest version, and the other table (tbl_store_audit) holds previous versions. When the latest record is updated, it is inserted into the tbl_store_audit table as a revision, and the updated details are used as the latest record.
For example: The latest version is held in tbl_store, however the tbl_store_audit may hold 5 records which are the past records used before changes were made - these are seen as revisions.
I want to be able to compare what has changed between each revision in the tbl_store_audit table. For example: Out of the 10 columns, the change between revision 1 and revision 2 was the size from XL to XXL. The change between revision 3 and revision 4 was the size XS to M and price 4.99 to 10.99, and so on.
Eventually i will create an APEX report that will show the user the revision number and what was changed from and to.
I seen in a previous post i need to note my oracle version: Oracle version 10.2.0.4.0
My scenario is to insert values into 'out' column by comparing 's' and 'IP' columns of temp table.The exact situation is at first need to go to ip column,take a value and then go to source column and check for the same value of ip which is taken previously.Then after corresponding ip of that source column should be inserted back in previous source column.
The situation is marked clearly in file which i am attaching with '--' comments at respective places.I am also pasting the code which i tried out,unfortunately it is giving error as exact fetch returns more than requested number of rows since there are duplicates in the table.I tried it using nested for loops.Also implemented using rowid,but it didnt work.
fixing the errors or if there is any new logic that can be implemented.
DECLARE i_e NUMBER(10); BEGIN FOR cur_1 IN(SELECT IP from temp where IP IS NOT NULL) LOOP FOR cur_2 IN(SELECT IP from temp where s=cur_1.IP)
I am an Oracle beginner and I am having some trouble with the following insert query.
I am inputting values into text boxes and then this is carried out as a trigger upon clicking a button.
INSERT INTO client VALUES(':student.txtclientid', ':student.txtclientname', ':student.clientaddress', 13564338); INSERT INTO enrolment VALUES(':student.txtclientid', ':student.lstoccurrence', null, null);
The above text boxes are all working fine as I have viewed the values using the message command. My proplem is that if i leave the fields blank it inserts ':student.txtclientname' into the row, otherwise it returns "Could not insert record"
I am trying to come up with a sql select statement that provides all rows for employees with 2 or more cities.
with sample_table as ( select 'John' name,'city' ValueType,'Toronto' Value from dual union all select 'John' name,'city' ValueType,'Vancouver' Value from dual union all select 'Susan' name,'city' ValueType,'Toronto' Value from dual union all select 'Susan' name,'city' ValueType,'Seattle' Value from dual union all select 'Susan' name,'age' ValueType,30 Value from dual union all select 'Susan' name,'city' ValueType,'Atlanta' Value from dual union all
[Code]...
NAME VALUETYPE VALUE ----------- ------------- ------------ John City Toronto John City Vancouver Susan City Toronto Susan City Seattle Susan Age 30 Susan City Atlanta David City Chicago David age 35 David Status married David City Dallas
The above code is just to describe the sample table and the desired result set. Please note that Mary is not on the result set since she has no city assigned to her. Also Julia is not on the result set since she only has one city assigned to her. The others are there because they had at least 2 cities assigned to them.
I need the sql syntax that would return this result set.
I have a large table with a few billion rows. I need to find ITEM_NAME values in ITEM_MASTER table containing " " (spaces) and replace them with other values. This has to be done within the same script. The replacement values could be any characters or numbers, but not spaces.
The whole reason for this table is testing big databases, so it does not matter what it contains. The reason I need to replace them is that this table will be dumped to a space delimited flat file and spaces within values are not acceptable.
