correct this one.
declare
v_ename varchar2(10):='emp';
begin
for j in (select ename from v_ename)
loop
dbms_output.put_line(j.ename);
end loop;
end;
getting error v_ename table does not exists. i should use v_ename, as i dont know the table name.
Oracle 11gI have a large table of 125 million records - t3_universe. This table never gets updated or altered once loaded, but holds data that we receive from a lead company. I need to select records from this large table that fit certain demographic criteria and insert those into a smaller table - T3_Leads - that will be updated with regard to when the lead is mailed and for other relevant information. select records from this 125 million record table to insert into the smaller table.
I have tried a variety of things - views, materialized views, direct insert into smaller table...I think I am probably missing other approaches. My current attempt has been to create a View using the query that selects the records as shown below. Then use a second query that inserts into T3_Leads from this View V_Market. This is very slow. Can I just use an Insert Into T3_Leads with this query - it did not seem to work with the WITH clause? My Index on the large table is t3_universe_composite and includes zip_code, address_key, household_key.
CREATE VIEW V_Market asWITH got_pairs AS ( SELECT /*+ INDEX_FFS(t3_universe t3_universe_composite) */ l.zip_code, l.zip_plus_4, l.p1_givenname, l.surname, l.address, l.city, l.state, l.household_key, l.hh_type as l_hh_type, l.address_key, l.narrowband_income, l.p1_ms, l.p1_gender, l.p1_exact_age, l.p1_personkey, e.hh_type as filler_data, 1.p1_seq_no, l.p2_seq_no , ROW_NUMBER () OVER ( PARTITION BY l.address_key ORDER BY l.hh_verification_date DESC ) AS r_num FROM t3_universe e JOIN t3_universe l ON l.address_key = e.address_key AND l.zip_code = e.zip_code AND l.p1_gender != e.p1_gender
[code]....
I'm selecting a set of records from one table, for example: ID, description and date. From this I'm only wanting the latest inserted row. I've used the max function on the date which is fine, however, there are some records that have had their description changed. This then returns two values for one ID, the max for the original description and the max for the changed description.
I'm getting:
ID |Description |Date
1 ABC 01/01/2010
2 XYZ 02/03/2010
2 XYZ1 03/05/2010
When I want:
ID |Description |Date
1 ABC 01/01/2010
2 XYZ1 03/05/2010
As ID 2 with XYZ1 Description is the very latest row for that ID.
This is an audit table so the ID appears on numerous rows as it a composite key with date.
I just want to know that "is it safe to select a columns using ROWID in a table?"
View 3 Replies View RelatedI have a table with following structure:
CREATE TABLE ID_comments
(
ID CHAR(10 BYTE) NOT NULL,
S_COMMENTS VARCHAR2(255 BYTE),
P_COMMENTS VARCHAR2(255 BYTE),
C_COMMENTS VARCHAR2(255 BYTE)
);
For each Id, I can have multiple records.
Below is the insert script of one of the ID:
Insert into ID_comments values ('0813654254','','JR/0813653606 single','');
Insert into ID_comments values ('0813654254','','JR/0813653606 single','');
Insert into ID_comments values ('0813654254','','JR/0813653606 SINGLE','');
Insert into ID_comments values ('0813654254','','JR','');
[code].......
Now I want to select only one record from this table for an ID, which will have "not null" values for s_comments,p_comments,c_comments columns. If for some ID , there is no "not null" row for any column, then pick up the "null" row/value for that column.
Is there any way to use * along with the default value while selecting on a table...I need something as follows:
select *, 'JUNK' from table_name;
(or)
select 'JUNK', * from table_name;I know it will not work.
This is my table design:
REQUEST(R_ID,attr1,attr2)WIPS(R_ID,WIP,attr3,attr4)SHIPPING(WIP,attr5,attr6)
How do I limit my query to show the information from REQUEST but only where the all of the wips associated between REQUEST and WIPS are not in the SHIPPING table. For example, the SHIPPING table has all of the WIPS that have been shipped, I only want to show the REQUEST rows where all of the WIPS have not shipped.
I am new to oracle and have an issue with selecting data from a table on date criteria.
select * from table1 t where t.DT BETWEEN TO_DATE(sysdate-1,'dd/mm/yyyy') AND sysdate
my understanding is that this should give me the data for just one day. but it is not.
What I want is, data for last 30days from today.
I have a flat file as source wherein I am getting values like
Comp_id, Comp_name, ISIN, column_name, column_value
The structure is like this may contain multiple records like Comp_id, Comp_name, ISIN will be same, but column_name will contain the column_name to which its corresponding column_value needs to be populated to.
E.g. of Feed File -
Comp_id, Comp_name, column_name, column_value
1,HSBC,branch_name,HSBC-DELHI
1,HSBC,branch_add,24-Lajpat Nagar
1,HSBC,branch_phone,2322322
2,HSBC,branch_name,HSBC-MUMBAI
2,HSBC,branch_add,24Andheri
2,HSBC,branch_phone,4445221
2,HSBC,branch_postalcode,400023
Target table structure
Comp_id, Comp_name, branch_name, branch_add, branch_phone, branch_postalcode
I need to insert the above data to a table by selecting data from above scenario.
I am working on Pro*C and i have a requirement where i need to select all the rows from a table into a c - structure variable. Since i get to know the no of rows in the table which is getting selected only at run time, i need to create a pointer variable to the structure and i'll allocate the size to it based on the count of rows in the table using malloc or calloc.I tried allocating memory using calloc and it does not show any error. But when i when the exec select statement run it shows an error.
Statements i have used:
struct common *comp;
struct common_ind *comp_i;
comp = (struct common*) calloc(rowcount, sizeof(struct common));
comp_i = (struct common_ind*) calloc(rowcount, sizeof(struct common_ind));
exec sql at db1 select * into :comp indicator :comp_i from tab1;
Error i get :
Stop Error: -2112
Stop Error: -1012
Stop Error: -1012
I am trying to execute dynamic SQL in Stored Function and I don't know how to do this.
Explanation:
In the function I am calling pr_createtab is procedure which will create a physical table and return the table name in the out variable v_tbl_nm.
I need to query on this dynamic table and return the result as return result. But i am not able to do it.
Here T_web_loylty_report_table is a type.
CREATE OR REPLACE function CDW_DSS.f_ReturnTable(i_mrkt_id in number, i_cmpgn_year in number)
return T_web_loylty_report_table is
v_tbl_nm varchar2(50);
i_cntry_cd varchar2(20);
v_sql_str varchar2(32567);
[code]......
I have plsql table as out parameter in one function.From another function i called that function ,its executing perfectly but while returning to called place its saying a character to numeric conversion error.I checked all the l
Note: i can not able post all that functions here.
Is there any table except (global temp table and permanent table) which can be used to store data and be used in inner, left and right join for a session.
View 7 Replies View RelatedI am fetching a value in a variable as:
<select application_short_name into l_appl_nm from fnd_application where application _id=:p_appl_id>
Now I need to use the value fetched in variable "l_appl_nm" as a table partition name in next query.
I am trying to insert a column into a variable from a trigger.
Here is the code that i have:
CREATE OR REPLACE TRIGGER BUYER_after_update AFTER UPDATE ON buyer
FOR EACH ROW
DECLARE
v_key varchar2(10);
BEGIN
select ID into v_key from buyer;
insert into message_log_table (table_name, message_comments)
values
('Buyer', 'Buyer '||v_key||' has been updated');
end;
/
When I run the above I get the following compiler error:
[Error] ORA-00904 (6: 12): PL/SQL: ORA-00904: "ID": invalid identifier
Since ID is defined in my BUYER table I do not understand what the error means.
Here is my create table statement:
CREATE TABLE BUYER
(
ID VARCHAR(50) NOT NULL PRIMARY KEY,
FNAME VARCHAR(50) NOT NULL,
LNAME VARCHAR(50) NOT NULL,
ADDRESS VARCHAR(50) NOT NULL,
CITY VARCHAR(50) NOT NULL,
STATE VARCHAR(2) NOT NULL,
ZIP_CODE NUMBER(5) NOT NULL
);
create table t (
col1 varchar2(2),
col2 varchar2(1),
tab_name varchar2(50));
[Code]....
In this case :v will be replaced with t1. I got the error invalid table name.
where table t1 has its own structure.
Can I declear a variable in PLSQL as the row type for a table, who's name is unknown during compile time, but will be determined when the PLSQL is runnning. The code is like following:
Procedure operTable( tableName IN VARCHAR2)
IS
TYPE ty_Row IS tableName%ROWTYPE
v_Row ty_Row;
CURSOR v_quey_cur
[code]...
I wish to create a table with week-number as suffix _36 or _30
CREATE TABLE TEST1_$WEEKNUMBER AS (SELECT * FROM TEST1);
$WEEKNUMBER is this statement:
SELECT TO_CHAR (TO_DATE(SYSDATE, 'dd.mm.yyyy'), 'IW') from DUAL
CREATE TABLE doesn't accept subselect
How to do that with SQL?
I want to add a variable number of new columns to an existing table temp (with column provided).
Example:
NewColumnNo = 4
-> the columns shall be named rate_1, rate_2, rate_3 and rate_4
-> the values shall be = Column / NewColumnNo
The result shall be like this:
create table temp_res (prodid integer, rate_1 number, rate_2 number, rate_3 number, rate_4 number);
insert into temp_res values(1, 0.25, 0.5, 0.75, 1);
insert into temp_res values(2, 0.25, 0.5, 0.75, 1);
insert into temp_res values(3, 0.25, 0.5, 0.75, 1);
insert into temp_res values(4, 0.25, 0.5, 0.75, 1);
insert into temp_res values(5, 0.25, 0.5, 0.75, 1);
insert into temp_res values(6, 0.25, 0.5, 0.75, 1);
insert into temp_res values(7, 0.25, 0.5, 0.75, 1);
insert into temp_res values(8, 0.25, 0.5, 0.75, 1);
insert into temp_res values(9, 0.25, 0.5, 0.75, 1);
I am unable to insert the result set of query into corresponding SQL Table type variable where as same functionality can be accomplished by PL/SQL table type variable. Can't we access the same by using SQL type variable?
Ex:
Step 1:
SQL Object type , Table type Objects creation :
drop type sql_emp_tab_type ;
drop type sql_emp_type ;
create or replace type sql_emp_type as object
(
empno number,
ename varchar2(20),
[code]...
Step 2: Accessing the table type object from PL/SQL block
SQL>
SQL> declare
2
3 tab_type_var sql_emp_tab_type := sql_emp_tab_type();
4
5 begin
6
7 tab_type_var.extend(10);
[code]...
Step 3: Instead of SQL Table type , if we define the corresponding PL/SQL table type variable
SQL> declare
2
3 --tab_type_var sql_emp_tab_type := sql_emp_tab_type();
4
5 type pl_sql_emp_type is record
6 (
7 empno number,
[code]...
I have a stored proc SP_INSERT_TRAINEES.Here sTraineeNo is provided as input which has count of trainee needs to be inserted in table aaa_foc.user_profile. The sequence is used to generate ids as :
CREATE SEQUENCE AAA_FOC.TRAINEE_ID INCREMENT BY 1 MINVALUE 0 MAXVALUE 999 NOCACHE NOCYCLE NOORDER
I want the values for ids to be inserted as 001,002,003,.......010,011,................099,100,101,............999.So that the values in the table would be like TRAINEE001,002.......
I have tried to use LPAD to it but the values are getting insertes as TRAINEE1,2,3...........
The code is given below:
CREATE OR REPLACE PROCEDURE AAA_FOC9.SP_INSERT_TRAINEES
(sTraineeNo IN NUMBER,
nReturned_O OUT NUMBER)
IS
ln_insert_cnt PLS_INTEGER :=0;
nSequence NUMBER:=0;
[code]......
how to select the sixth highest earner in my employees table.how to select 6th lowest earner..
View 18 Replies View RelatedI am having trouble selecting the row that has max(pay_period) of 13. Here is some test data.
CREATE TABLE TESTME
(
SSN VARCHAR2(11 BYTE),
PAY_PERIOD VARCHAR2(3 BYTE),
PAY_YEAR NUMBER,
KRONOS_ID VARCHAR2(6 BYTE),
LAST_NAME VARCHAR2(15 BYTE),
FIRST_NAME VARCHAR2(14 BYTE),
ADJ_SALARY NUMBER
)
[code]....
Have a table like this:
ID1ID2DATEID2Value
1121/1/20066
1241/1/2006400
1246/1/2006410
1366/1/2006100
2121/1/20077
2246/1/2007350
2247/1/2007360
I need to return 1 row for each ID1 value - and only the ID2 value of 24 and only the most recently dated record for the multiple ID2 values - query would return:
1246/1/2006410
2247/1/2007360
I have worked and worked on this and I am still stumped (part of the problem may be I am also trying to make this work in Crystal Reports but that is for another day). I need to make this work in Oracle first.
I want to select data inserted in the table for that day only.
Table name -->ADJCOLUMNS
i want to select areAccount_no-->number datatype TRANSACT_DATE-- NOT NULL DATE I have written the query below .Is the below query correct.
select account_no,to_char(TRANSACT_DATE,'DD-MON-YYYY HH24:MI:SS') T_date from adj
where to_char(TRANSACT_DATE,'DD-MON-YYYY HH24:MI:SS') between
to_char(TRUNC(sysdate),'DD-MON-YY hh24:mi:ss') AND
to_char(TRUNC(sysdate+1) - 1/86400,'DD-MON-YY hh24:mi:ss');
I need to find the top two values value for each ID Number:
CREATE TABLE TABLE_1
(ID number (8),
NUMBER_1 number (2),
NUMBER_2 number (2),
NUMBER_3 number (2),
NUMBER_4 number (2));
INSERT INTO TABLE_1
VALUES
('12345679','30','25','30','05');
INSERT INTO TABLE_1
VALUES
('99999999','30','25','15','05');
Desired Result:
ID Number 1st 2nd
12345679 30 30
99999999 30 25
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for HPUX: Version 11.2.0.3.0 - Production
[code]...
SELECT job_request_id,
CAST (COLLECT (USER_ID) AS SYS.OdcinumberList) user_ids
FROM mytable
GROUP BY job_request_id;
ORA-22814: attribute or element value is larger than specified in type
I have tables SUBJECT(subject_id, name, number) and PS(ps_id, subject_id, student_id). I need to select all from SUBJECT,subject_id and student_id from SP, joined by subject_id, where student_id needs to be read from session. I'm using asp.net with oracle database. How to get the value from the session.
View 2 Replies View Relatedhow can I select whole table in parts of 100 rows?
If I have primary key I can:
CODEstart=0;
end=100;
select * from table where ID>=start_point and ID<end;
start=end;
end=end+100;
and repeat:
CODEselect * from table where ID>=start_point and ID<end;
How can I do it without primary key? Is there another posibility to getting 100 number of rows? Maybe using rowid?
I need to calculate a list of people, who got some services more that 2 times with the same service koda (pas_kodas) to the same person (zmo_kodas). It should not depend on report number.
[URL]...
What I get is in green (services are calculated more than 2 times BUT in the same report).
What I need is in red: calculate servises more that 2 times ACCROSS all reports to the same person (zmo_kodas).
[URL]...
One person (zmo_kodas) can have a lot of reports (ats_nr).
Every report can have one or more services (pas_kodas).