I have to install oracle 11g R2 on AIX. but I need to install from putty I have configured cygwin Xwindow. able to get GUI from my local VMware linux server but unable to get GUI for remote servers.
and followed the same process as I did for my local vmware linux box. How to get the GUI for remote servers as well. If it not possible or any configuration needs to be done at remote site.
I can't seem to get TNS Listener to install using a responsefile in Oracle 9i... I've been using the netca.rsp file that comes included on disc one of the Oracle 9i Release 2 cds. I've tried calling netca.rsp from inside a custom install response file template...
# Oracle Net Configuration Assistant
[oracle.networking.netca_9.2.0.1.0]
#-----------------------------------------------------------------------------
# Name : OPTIONAL_CONFIG_TOOLS
[Code].....
but when I check the services in Administrative settings the listener has not been created...I'm using OraInst as my staging directory.
I've also tried using the "Using Configuration Assistants in Non-Interactive Mode" section at:
URL
I also tried adding:
[Session]
TOPLEVEL_COMPONENT={"oracle.net.ca","9.2"}
to the netca.rsp file, since it wasn't there by default...
I've also tried going to my staging directory from the command prompt and running E:OraInst> launch.exe -silent -responseFile netca.rsp where launch.exe is a copy from launch.exe generated in oracleora92in
I want to install Oracle software 10g R2 at linux platform. I want to install it at Silent mode, but not able to find the .rsp(response) file. I have created the .rsp(response file) from oui , hut not able to configure the same.
View 1 Replies View RelatedI'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
usually i create oracle databases using the create database command, however im trying this time to use the dbca -silent -createDatabase -templateName General_Purpose.dbc - i have edited the General_Purpose.dbc to have the control files. datafiles etc to go to a different location other then the $ORACLE_BASE and no luck so far, whatever i do even changing the $oracle_base just dumps all into a location, how can i force it / change it - this is Oracle 11GR2 on linux
see sample of my General_Purpose.dbc
<initParam name="control_files" value="/u01/oradata/control01.ctl, /u02/oradata/control02.ctl"/>
<initParam name="diagnostic_dest" value="/backup/oracle/oradata"/>
[Code].....
I am installing oracle 11 by silent installation.I want my charset to be UTF16, how can i change it.
View 1 Replies View RelatedI am trying to create a silent install as part of a batch file that does other things after. I'm running into the following issues
1) I need the batch file to wait until the install is done to continue. Trouble is that running setup with a response file opens up a new windows to run the install. I tried the wait command but doesn't work right either
2) Same issue with DBCA and a response file.
Any way to run the silent installs and have the batch file wait until the install is done and then continue? The less user intervention required, the better.
I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:
[FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory.
CAUSE: The central inventory location provided is not empty.
The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not work. When I did the install on SLES 11 SP1 I did not get this error.
I am running this command to install oracle:
/runInstaller -silent -ignorePrereq -showProgress -waitForCompletion -responseFile /tmp/db_install.rsp
drwxrwx--- 6 oracle oinstall 4096 Apr 2 10:42 oraInventory
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:39 ContentsXML
drwxrwx--- 3 oracle oinstall 4096 Apr 2 10:41 backup
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:41 logs
[code]....
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedMy question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies View RelatedI want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedWhen i am trying to install oracle database 10g, it is giving following error.Error in writing to directory :
c:Users:
ensure that this directory is writable and has atleast 55MB of disk space ,installation cannot continue.
I am running oracle Apps 11.5.10.2, trying to enable duplex printing for all PDF / XML reports.
View 1 Replies View RelatedI am using oracle 10g. Is there any mechanism to / parameter to enable or disable archive log mode? can I enable arching directly from pfile without touching the startup process?
View 2 Replies View RelatedHost: Win7
Guest: Using Virtual PC on Win7, created a VM using XP-Mode. Installed Oracle and everything on it. I can connect to the Oracle from within the guest env using sqlplus. Listener is also running, checked with 'lsnrctl status"
Guest and Host can ping (network) each other. I installed the guest using the Microsoft Loopback Adapter. Disabled the firewall on the guest OS before the host ping could work.
So ping works both ways from guest to host and host to guest. tnsping from host fails says "no listener". When I did a "telnet 192.168.x.x 1521" from host it said could not open connection on port 1521.
How do you open port 1521 on the guest OS to traffic from the host OS?
I'm trying to create a physical standby database on my Oracle9i DB runing on WinXP.
Note: I have both Primary and Standby on the same system.
Actually everything went well .... I did created the standby DB but the problem is I can not start my primary DB if my standby DB is mounted. I get this error:
ORA-01102: cannot mount database in EXCLUSIVE mode
And when I read about the error message I learnt that I should start my DB in compatible mode ...
The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups. There are are 200+ databases running on OEL, RHEL and Windows. So we planned to host the recovery catalog database on Oracle Active DataGuard 11.2.0.1 Enterprise Edition on RedHat EL 5.8 version on two physical servers.
The Primary Instance will be in one server in the Primary DC and the Standby Instance will be on another server in another DC. Also all the database datafiles are hosted in ASM Diskgroups on SAN (DATA, FRA, REDO, ARCH diskgroups). Are there any specific RPM/patch/OS user custom/specific settings or configurations needed..?
how to achieve F11(Query mode) and Execute Query in Oracle Forms?
View 1 Replies View RelatedI have a scenario like while taking the hot backup i forgot put end backup mode,at the same time one of user u1 updating some lacks of recordsinto the T1 table.at some time he wants rollback.and my redolog file size is very less.is it possible to rollback? if yes how?
View 3 Replies View RelatedToday I am installing oracle 10g on Enterprise linux 4.5 . I am having some problem while running OUI. Having much confusion with Oracle installation .....
See Error message shows
================
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
Installing OEL but shows actual result was redhat-4
--------------------------------------------------------------------------
CODEChecking for libaio-0.3.96; found Not found.Failed <<<<
Checking for shmmni=4096; found shmmni=-2147483648.Failed <<<<
Checking for libaio-0.3.96; found Not found.Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
here showing -ve value many times i changed values . Still error is here ....
My question is
1) by default OEL having all required RPM's but why it requires LIBAIO.
2) Installing OEL but shows actual result was redhat-4
I have update from Oracle 11.1 to 11.2 - but i cant see the new version
when i type: `Select * from v$version` in pl/sql developer
i still see the old version.
My business requirement is to in stall ORACLE 10.3 on IBM AIX 6.1 .
View 4 Replies View RelatedI want to install oracle 10 g on win 8 , i found way for setup at this link
[URL].......
reach till step 5 and stop as i do not found any file with this name databases tageprereqdbrefhost.xml and databasestageprereqdb_prereqsdb refhost.xml. in oracle source do not know if shall i download them and then update or what ,
I have installed the Oracle 10g at the following location : -
C:oracleproduct10.2.0client_1NETWORKADMIN
But I was trying to ping Oracle Client from Command Prompt. See Below : -
c:Oracle>tnsping SONIA
ERROR IS COMING no listener
MINE tnsnames.ora File : -
# tnsnames.ora Network Configuration File: C:oracleproduct10.2.0client_1
etworkadmin nsnames.ora
# Generated by Oracle configuration tools.
SONIA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sonia)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = SONIA)
)
)
What this error means? connecting to the ORACLE 10g. I have studied on the net that for Oracle to connect three ora files need to be there. But in my ADMIN Folder two files are created by Oracle Configuration Tools names SqlNet.ORA , TNSNAMES.ORA. LISTENER.ORA file is not created.
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View Related
