Charset On Silent Installation
Apr 5, 2011I am installing oracle 11 by silent installation.I want my charset to be UTF16, how can i change it.
View 1 RepliesI am installing oracle 11 by silent installation.I want my charset to be UTF16, how can i change it.
View 1 RepliesI have to install oracle 11g R2 on AIX. but I need to install from putty I have configured cygwin Xwindow. able to get GUI from my local VMware linux server but unable to get GUI for remote servers.
and followed the same process as I did for my local vmware linux box. How to get the GUI for remote servers as well. If it not possible or any configuration needs to be done at remote site.
I can't seem to get TNS Listener to install using a responsefile in Oracle 9i... I've been using the netca.rsp file that comes included on disc one of the Oracle 9i Release 2 cds. I've tried calling netca.rsp from inside a custom install response file template...
# Oracle Net Configuration Assistant
[oracle.networking.netca_9.2.0.1.0]
#-----------------------------------------------------------------------------
# Name : OPTIONAL_CONFIG_TOOLS
[Code].....
but when I check the services in Administrative settings the listener has not been created...I'm using OraInst as my staging directory.
I've also tried using the "Using Configuration Assistants in Non-Interactive Mode" section at:
URL
I also tried adding:
[Session]
TOPLEVEL_COMPONENT={"oracle.net.ca","9.2"}
to the netca.rsp file, since it wasn't there by default...
I've also tried going to my staging directory from the command prompt and running E:OraInst> launch.exe -silent -responseFile netca.rsp where launch.exe is a copy from launch.exe generated in oracleora92in
I want to install Oracle software 10g R2 at linux platform. I want to install it at Silent mode, but not able to find the .rsp(response) file. I have created the .rsp(response file) from oui , hut not able to configure the same.
View 1 Replies View RelatedI have a CLOB containing a XML code and all XML tags where created using the DB charset: WE8ISO8859P15.
For example:
{code}
<?xml version="1.0" encoding="ISO-8859-1"?>
<certidao xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<funcionario>
[Code]...
I need to maintain this charset value.
But now I need to convert all my CLOB data into UTF-8 charset for external requirements and stored this new CLOB in a table column.
I can't change the charset of the session. I've tried to use a function
{code}
FUNCTION convert_xml (pcl_xml IN CLOB)
RETURN CLOB
[Code]....
This function apparently works, but when I try to validate the XML content (after I replace the encoding="ISO-8859-1" to encoding="UTF-8") the validation software tells me that I have some characters that should not be present in a file using UTF-8 encoding.
I am trying to create a silent install as part of a batch file that does other things after. I'm running into the following issues
1) I need the batch file to wait until the install is done to continue. Trouble is that running setup with a response file opens up a new windows to run the install. I tried the wait command but doesn't work right either
2) Same issue with DBCA and a response file.
Any way to run the silent installs and have the batch file wait until the install is done and then continue? The less user intervention required, the better.
I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:
[FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory.
CAUSE: The central inventory location provided is not empty.
The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not work. When I did the install on SLES 11 SP1 I did not get this error.
I am running this command to install oracle:
/runInstaller -silent -ignorePrereq -showProgress -waitForCompletion -responseFile /tmp/db_install.rsp
drwxrwx--- 6 oracle oinstall 4096 Apr 2 10:42 oraInventory
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:39 ContentsXML
drwxrwx--- 3 oracle oinstall 4096 Apr 2 10:41 backup
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:41 logs
[code]....
I need to configure character set for my database. I have 2 options:
AL16UTF16 - require 2 bytes per character (fixed length)
UTF8 - character length - 1 until 4 bytes. (variable length)
until here ok...
The AL16UTF16 certainly will occupy more space than UTF8. So my question is, When would I need use AL16UTF16 character set mode?
I hear one time, when a database write many values with the same length. it does it in the same HD cylinder. So the HD arm could with a single movement read all the fields in cylinder completely. Improving the read/write performance.
Can i duplicate a database that is in a different CHARACTER SET?
If i can't made the duplication in a direct way, how can i convert or transform to duplicate a database from one character set o another?
I read and tried a lot, but I can't consume a UTF-8-Webservice correct in a 11gR2-DB: German "Umlaute" like ü are displayed/written as ü.
The service sends all correct. (tested with soap-ui 4.5.1)
The DB-NLS-Parameters are:
SQL> select * from NLS_DATABASE_PARAMETERS;
PARAMETER VALUE
------------------------------ --------------------------
NLS_LANGUAGE GERMAN
NLS_TERRITORY GERMANY
[code]...
I consume Service with that skript:
DECLARE
l_http_request UTL_HTTP.req;
l_http_response UTL_HTTP.resp;
l_buffer_size NUMBER (10) := 512;
l_line_size NUMBER (10) := 50;
l_lines_count NUMBER (10) := 20;
[code]....
What can I do, to get the response correct in NLS_CHARACTERSET WE8MSWIN1252.I think, it must be possible to convert the response, but I didn't found the correct solution.And I don't understand, why the body_charset is ever "ISO-8859-1" (commented in procedure). Settings utl_http.body_charset is without effect.
Oracle Corporation --- TUESDAY AUG 21 2012 11:17:46.685
Heterogeneous Agent Release 11.2.0.1.0 - 64bit Production Built with Oracle Database Gateway for ODBC
oracle server NLS_CHARACTERSET is UTF8 and mysql server Character set is UTF8, how should i configure the parameters HS_LANGUAGE(initsid.ora) and CHARSET(odbc.ini)? now i
configure the CHARSET = UTF8 and HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P15,but the sql query reslut like this:
SELECT "id","name" FROM "accounts"@LNMYSQL
_______________________________________
xy-20120712-00016728 é士焱
the name Column is Garbled.
I'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
usually i create oracle databases using the create database command, however im trying this time to use the dbca -silent -createDatabase -templateName General_Purpose.dbc - i have edited the General_Purpose.dbc to have the control files. datafiles etc to go to a different location other then the $ORACLE_BASE and no luck so far, whatever i do even changing the $oracle_base just dumps all into a location, how can i force it / change it - this is Oracle 11GR2 on linux
see sample of my General_Purpose.dbc
<initParam name="control_files" value="/u01/oradata/control01.ctl, /u02/oradata/control02.ctl"/>
<initParam name="diagnostic_dest" value="/backup/oracle/oradata"/>
[Code].....
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies View RelatedI want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedWhen i am trying to install oracle database 10g, it is giving following error.Error in writing to directory :
c:Users:
ensure that this directory is writable and has atleast 55MB of disk space ,installation cannot continue.
I have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and working. I need install the client 32x because some applications require.
View 2 Replies View RelatedI have a Windows Server 2008 R2 64x with Oracle DB 11.2.0.1.0 64x and client 64x correctly installed and workingI need install the client 32x because some applications require.
View 8 Replies View RelatedI am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedI have a production database, the manager ask me to take the test Server to make an Oracle RAC with the Production Server.
Can I Install the RAC 11g R1 only in one Server (test server) ? and then include the Second Server (production)?
Today I am installing oracle 10g on Enterprise linux 4.5 . I am having some problem while running OUI. Having much confusion with Oracle installation .....
See Error message shows
================
Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
Installing OEL but shows actual result was redhat-4
--------------------------------------------------------------------------
CODEChecking for libaio-0.3.96; found Not found.Failed <<<<
Checking for shmmni=4096; found shmmni=-2147483648.Failed <<<<
Checking for libaio-0.3.96; found Not found.Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
here showing -ve value many times i changed values . Still error is here ....
My question is
1) by default OEL having all required RPM's but why it requires LIBAIO.
2) Installing OEL but shows actual result was redhat-4
I have update from Oracle 11.1 to 11.2 - but i cant see the new version
when i type: `Select * from v$version` in pl/sql developer
i still see the old version.
My business requirement is to in stall ORACLE 10.3 on IBM AIX 6.1 .
View 4 Replies View Related