ORA-01092 / ORACLE Instance Terminated - Disconnected Forced
Apr 7, 2011
while statrp database am gettion error message like
" ORA-01092:ORACLE Instance terminated. Disconnected forced"
alter log file:
Errors in file g:\oracle\product\10.1.0\admin\hrdev\udump\hrdev_ora_196.trc:
ORA-01578: ORACLE data block corrupted (file # 1, block # 57371)
ORA-01110: data file 1: 'G:\ORACLE\PRODUCT\10.1.0\ORADATA\HRDEV\SYSTEM01.DBF'
Error 1578 happened during db open, shutting down database
USER: terminating instance due to error 1578
Thu Apr 07 10:06:54 2011
Errors in file g:\oracle\product\10.1.0\admin\hrdev\bdump\hrdev_pmon_86\0.trc:
ORA-01578: ORACLE data block corrupted (file # , block # )
[code]....
View 3 Replies
ADVERTISEMENT
Oct 13, 2006
We had a good working Oracle 8i (8.1.7) database on Windows 2000 (SP 2) Inter Xeon server. A large delete operation was
initiated (deletion of 931,000 records; around 400 MB) which failed in the middle with some error messages, i don't remember.
I should have specified a special rollback segment created for this transection, but i forgot to do it. After that oracle
gives the following error in SQL Plus after I try to log in (same msg even after several reboots)
ORA-01092: ORACLE instance terminated. Disconnection forced
Here is the log file,
Dump file C:oracleadminillingdumpillingALRT.LOG
Fri Oct 13 14:19:40 2006
ORACLE V8.1.7.0.0 - Production vsnsta=0
vsnsql=e vsnxtr=3
[Code]....
Notice that that the database mounts successfully on "startup mount dbname" but it terminates with the above error messages
immediately when I give the "alter database open" command from server manager. Directly giving the "startup open dbname"
command also gives the same error message and log file.
Some one recommended adding the following line to Init.ora file for the db (if some corruption in rollback tablespace has occured)
fast_start_parallel_rollback= false
You may have seen this line in the log file above. However, it has no effect on the database functioning.
View 2 Replies
View Related
Mar 29, 2012
I create a manual database "jaimaa" on windows 7 as
Microsoft Windows [Version 6.1.7600]
Copyright © 2009 Microsoft Corporation. All rights reserved.
C:\Users\SARASWATIMAA>SET ORACLE_SID=JAIMAA
C:\Users\SARASWATIMAA>SQLPLUS
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Mar 29 23:19:31 2012
Copyright © 1982, 2005, Oracle. All rights reserved.
Enter user-name: SYS AS SYSDBA
Enter password:
Connected to an idle instance.
SQL>
SQL> STARTUP NOMOUNT
ORACLE instance started.
Total System Global Area 117440512 bytes
Fixed Size 1247588 bytes
Variable Size 58721948 bytes
Database Buffers 50331648 bytes
[Code].....
View 1 Replies
View Related
Dec 20, 2011
I am still getting the erros.
C:>set oracle_sid = sidname C:>set oracle_sid oracle_sid = sidname
C:>sqlplus SQL*Plus: Release 11.2.0.1.0 Production on Wed Dec 21 01:49:06 2011 Copyright (c)
[code]....
View 2 Replies
View Related
Mar 19, 2010
I got this error after i patch to 10.2.0.4.0. Before patch, database running smooth.
I shutdown as usual using shutdown only.
View 8 Replies
View Related
Jan 31, 2012
i got an error while creating database manually
View 26 Replies
View Related
Feb 2, 2013
i have 2 nodes RAC with service piodbserv2 which is active only on 2nd node. client is connected for (100% sure) to piodbserv2 on node2. i am doing relocation of this service to node1 using -f (force) option:
[oracle@rac1 ~]$ srvctl relocate service -d piodb -s piodbserv2 -i piodb2 -t piodb1 -f
[oracle@rac1 ~]$ srvctl start service -d piodb -s piodbserv2 -i piodb1
PRKP-1064 : Service piodbserv2 is already running on instance piodb1.
[oracle@rac1 ~]$ srvctl start service -d piodb -s piodbserv2 -i piodb2
-f (force) option is described as this which forcibly rellocate users from one to another node simply disconnecting sessions from node2 in my example
but i am surprised because my session is still opened on node2 after piodbserv2 relocation
SQL> select sys_context('userenv','instance') from dual;
SYS_CONTEXT('USERENV','INSTANCE')
-------------------------------------------------------------
2
SQL> select sys_context('userenv','instance') from dual;
SYS_CONTEXT('USERENV','INSTANCE')
-------------------------------------------------------------
2
SQL> select instance_number from v$instance;
INSTANCE_NUMBER
---------------
2
SQL>
at this moment piodbserv2 is only on node2. when i kill my user session and try connect again it will connect to node1. but i suspected that after forcibly rellocated service, my sessions will be disconnected from node2 forcibly also.
View 6 Replies
View Related
Sep 18, 2012
We have a 2-Node RAC11g R2.0.3 installed on Linux 5.5.
My problem to have a private connection disconnected on daily bases at 12:00 PM and 3:00 PM ONLY,and come back life within 2 minuets,I am using cross-over cable to connect those private interface , So in the ocssd.log Stating :-
2012-09-18 15:06:43.735: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 50% heartbeat fatal, removal in 14.340 seconds
2012-09-18 15:06:50.752: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 75% heartbeat fatal, removal in 7.330 seconds
2012-09-18 15:07:19.821: [ CSSD][1096161600]clssnmPollingThread: node racmain1 (1) at 90% heartbeat fatal, removal in 2.480 seconds, seedhbimpd 1
And the instance is restarted accordingly.
View 5 Replies
View Related
Sep 14, 2012
SQL> startup mount
ORACLE instance started.
Total System Global Area 905969664 bytes
Fixed Size 1293720 bytes
Variable Size 520094312 bytes
Database Buffers 377487360 bytes
Redo Buffers 7094272 bytes
Database mounted.
SQL> alter database noarchivelog;
Database altered.
SQL> alter database open; alter database open
ERROR at line 1: ORA-00603: ORACLE server session terminated by fatal error
View 3 Replies
View Related
Jul 26, 2010
While creating the index we are getting the error "ORA-00603: ORACLE server session terminated by fatal error".
We have the space in tablespaces and also in the file systesm.
View 13 Replies
View Related
Mar 6, 2011
I've been working to create (via script) this database for the last 2 days.. everytime I startup in nomount mode (as sysdba), it displays this error:
$ echo $ORACLE_SID
elams
$
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 7 09:41:26 2011
[code]....
View 4 Replies
View Related
Nov 2, 2011
SQL> ALTER DATABASE MOUNT;
数据库已更改。
SQL> COL ERROR FOR A10
SQL> SELECT *FROM V$RECOVER_FILE
[code]...
i can't open the db.
View 18 Replies
View Related
Jul 1, 2010
Is it possible to use oracle dataguard from single instance to RAC instance ? Does Oracle dataguard support this ?
View 1 Replies
View Related
Mar 16, 2011
My context on our servers is the following one:
- one ASM instance
- X DB instances
- each DB instance uses 2 or more dedicated diskgroups from the ASM instance
- there is one diskgroup named FREEDISK that contains spare disks
On each DB instance you can see:
- the list and global parameters of all diskgroups using v$asm_diskgroup view
- the list and parameters of all disks the instance is using with v$asm_disk view
So my question is: how (if this is possible) to know the list of (spare) disks in FREE DISK disk group?
View 6 Replies
View Related
Dec 11, 2012
How to configure Oracle EM with newly created Oracle Instance on Oracle 10g DB,which is Single Instance DB but not RAC ,when I start the Oracle EM it is starting the default DB which created during Oracle Server Installation.
View 0 Replies
View Related
Nov 1, 2010
I have Oracle 11g R2 (11.2.0.1) with Oracle EM running on Solaris 10 with ZFS.When I start OEM it comes up and tells me that the listener is running but that the DB instance is down and agents are down.I know that the instance is up because I can start it manually.
Each time I start emctl, lsnrctl and DB manually everything starts running but OEM returns a failure for the DB. long as the display shows the DB not running OEM won't allow me to work in it.Instead of getting the login page I get the Database Control Page stating that "Enterprise Manager is not able to connect to the Database instance."I have tried the various emca -config dbcontrol db -repos drop and recreate but no luck.
Is there a way to uninstall/reinstall without dropping the DB?Are there control/configuration files I may hack to tell OEM the correct information?
View 3 Replies
View Related
Aug 17, 2011
Initial situation: Oracle 10g database single instance on Windows 2008 (datafile within NTFS partition)
Final situation: same database upgraded to Oracle 11g r2 on a two nodes RAC on Windows 2008 (datafile within ASM)
In your opinion, is this the best way to achieve the job ?
1) on the two nodes install grid 11gr2, asm, rdbms 11g r2 (SE)
2) export full from 10g
3) create a new empty 11g r2 database in the RAC 11g r2 infrastructure with the same tablespace layout of 10g database
4) import full from 10g to 11g r2
View 1 Replies
View Related
Jun 24, 2012
I have installed oracle 10g database in the my local laptop ( Windows 7) . This laptop is in LAN. I am not able to connect from other machines in LAN. When i open sqlplus, SQL Developer from the same machine, i was able to login to the instance.
But when i want to login from the other machines in LAN. I was not able to connect. I was able to ping the server on which the database was installed from other machines. why i am not able to connect ?
View 8 Replies
View Related
Jun 14, 2013
Issue 1: I have rdbms version 10.1.0.4.0. There is a replicated environment with 2 nodes for oracle database and the state of the node is standby when this issue occurs. We are getting ORA-0600/ORA-07445 causing instance failure over a period of time.
Few common errors are listed below
Errors in file /data1/dump/bdump/optical1_j000_7235.trc:
ORA-00600: internal error code, arguments: [kglpnal_1], [0x3A80C7878], [], [], [], [], [], []
Errors in file /data1/dump/udump/optical1_ora_834.trc:
ORA-00600: internal error code, arguments: [kcbgtcr_6], [1], [], [], [], [], [], []
Tue Apr 16 13:00:06 2013
ORA-07445: exception encountered: core dump [ksuxds()+5548] [SIGSEGV] [Address not mapped to object] [0x000000148] [] [].
Issue 2: I am not able to attach a single file of txt type which is less than 2048KB.As soon as I press upload File button after browsing, it disappears.
View 5 Replies
View Related
Oct 16, 2010
My database is working on Oracle 10g. After installing a Oracle 11g in my PC instance went down and my database got corrupt. What are the steps I should follow to recover my Database?
View 2 Replies
View Related
Jul 25, 2013
I have been asked to improve the speed of our extract feeds to another team. It was using an excel file as csv created with C# reading the csv into a global temporary table and a procedure to insert rows from global table to main table one at a time.
Around 1 million rows That was taking around 25 min. After trying sqlldr and an intermediate table I managed to reduce timing to 15 sec with sqlldr and Direct Path Load. I tried all that in one of our own DEV databases. Now we want to try the approach in one of DEV databases belong to downstream group (the one we feed data). They are rather reluctant to give me access to their DEV database! I have asked them to create a new login and grant object creation (DDL) to this user.They keep saying that they are prepared to give me a role but NOT schema owner. What is the best way of enabling me to create tables somewhere and test loading times with sqlldr.
I need to do full DDL (table/proc creation) and DML on a certain schema. So my question: What is the best way of doing so.. Do I need a schema created for user to do this workI they already have a general purpose schema, can they create a role to have full DDL: rights in that schema?
View 6 Replies
View Related
Apr 20, 2013
What is the hierarchy to stop and start oracle RAC instance ?
View 10 Replies
View Related
Feb 17, 2011
There is a Single Instance production server Oracle 9iR2 [9.2.0.8] OS HP-UX PARISC 11i v1 to RAC.
Now we want to migration this server with minimum downtime to Oracle 11gR2 [11.2.0.2] in RAC environment OS HP-UX 11i v3 Itanium DOwn time must be minimum. what will be the procedure ?
View 6 Replies
View Related
Jul 27, 2012
I've got the following table:
ID.................Date...........................number...period.....termination
434473......2012-04-18 00:00:00.000...............6.......month(s)...end of month
443080......2012-02-26 00:00:00.000...............36......month(s).....end of quarter
Now it's getting complicated. Date is the start date of a contract.
I need to calculate a date when the contract can be terminated and must compare it with the current date. Lets take the first row. In column "termination" is the termination date. A contract can be terminated at "end of month" (I need to check the last day of a month. In order to get the real termination date we need to subtract the column "number".
example 30.01.2012 - 7 month = 30.06. 2011
The thing I can do it, but my logic works only if the date is in the same year. I've been thinking a lot...sql is not important first....Have you got a theoretical solution?
View 11 Replies
View Related
May 4, 2011
I want to install oracle 11.2.0.2 single instance database on AIX 6.1, does oracle recommend separate OS user for grid infrastructure and for oracle install? how many groups I need to have for these users like oinstall, dba etc?
View 1 Replies
View Related
Feb 14, 2013
I have installed Weblogic Server 10.3.6 in my PC .While in installation i have chosen 'Custom' option instead of 'Typical' and Unchecked software Components 'Database Evaluation' and 'Oracle Coherence' and Installed 'Node Manager Service' then continued with Weblogic server installation .Weblogic Server installed Succesfully.
(In weblogic server home folder nodemanager.domains file also not created after weblogic server installation)
Now i started installation of Forms and Reports 11g R2 . While Configuring Instance 'Domain Creation is Failed'.
View 2 Replies
View Related
Jun 4, 2012
I'm have in Oracle version Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production:
while enter in a command
$emctl status dbconsole
output comes:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Oracle Enterprise Manager 10g is running.
----------------------------------------------------------------------------------
$emctl stop dbconsole
output comes:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
-----------------------------------------------------------------------------------
$emctl start dbconsole
output comes:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright © 1996, 2005 Oracle Corporation. All rights reserved.
http://localhost.localdomain:1158/em/conso...boutApplication
- An instance of Oracle Enterprise Manager 10g Database Control is already running.
-----------------------------------------------------------------------------------
View 1 Replies
View Related
Apr 3, 2013
I've tried to configure Connection Manager but i fails on TNS-04012: Unable to start Oracle Connection Manager instanceThis is my configuration (
CMAN1=(CONFIGURATION=
(ADDRESS=(PROTOCOL=tcp)(HOST=<hostname>)(PORT=1522))
(RULE_LIST=
(RULE=(SRC=*)(DST=<IP>)(SRV=*)(ACT=accept))))
[code]...
View 3 Replies
View Related
Jul 18, 2012
I am trying user managed recovery using archived and redo log files. I had restored old cold backup, then copy latest control file, redo log files, and archived log files at actual locations. Now I tried to recover database using following steps.
Quote:
connect sys as sysdba
startup mount;
recover database;
auto
After applied some archived files, one of the archived file corrupted and recovery cancel due to error, then i shut down the database. Now i want to copy corrupted archived file from backup and run the recovery further. so my question that should i have to run recovery from the beginning or can i run the recover from the last status of the database.
View 3 Replies
View Related
Apr 28, 2011
The following error has occurred:
ORA-06550: line 26, column 30:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 7, column 6:
PL/SQL: SQL Statement ignored
I am getting the error when i run the below anonymous block. Historic_report_data has got plenty of columns and using only the columns that are in tb_Statement in the query. It is working fine if i use a table with same number of columns as tb_statement instead of historic_report_data.
DECLARE
v_cnt NUMBER:=0;
v_data_load_error EXCEPTION;
BEGIN
dbms_output.put_line('Reconciliation scripts');
dbms_output.put_line('Reconcile tb_bank_Account_month and report_hist_data');
[code]....
View 16 Replies
View Related
