Networking And Gateways :: Oracle Database Not Connect From Outside LAN Via Static IP
Nov 17, 2011
I have created two database one for production and another one for test.I created both database in shared_server mode(by using dbca),after than I did not change anything.My problem is when i connect to test database from outside lan through static ip its working well,but when i connect to production database which is not connected. I checked and compared two databases,then I find there are some changes in dispatcher and mts_ dispatcher parameters.And I used this query to check the shared_server status,
ie.select * from v$shared_server,
the output of this query is attached with this post.
I had a query related to call_form function in forms 6i.How can I call a particular form via static ip(outside LAN),but the actual forms are stored in a server called "MAIN_SERVER" which resides in internal LAN domain.That is I have stored location of all my forms path(fmx)in my database table called "FORMS_LOCATION" in the MAIN_SERVER system under the directory "FORMS".From here only users can call all the forms by call_form function.To understand see the example below,
In the table FORMS_LOCATION,there is a column call "forms_path" which holds the value like,
In application the call_form just uses the column "forms_path" to call the form.like CALL_FORM("forms_path",no_hide) this statement will call the form from the main_server.
Here 1.MAIN_SERVER is the name of the server system where forms fmx is actually stored under the folder name "FORMS".When the users access the particular form the call_form function call the form from the MAIN_SERVER.Now there are no problem inside the LAN.Incase if I access the database and call the form outside LAN via internet through STATIC IP what happened was database was connected but call_form function failed and not calling the form because which does not know the MAIN_SERVER/FORMS/ path.
Because my user want to access the form outside lan via internet,so I tried replacing the above statement like //192.54.67.98/FORMS/EMPLOYEE.FMX' with static ip in the prefix instead of local server called MAIN_SERVER.But its not working again.How can I do this?.
I installed Oracle Express on my Windows 2003 Enterprise server. And right off the bat I cannot connect to it via command line. I have googled and read many sites, but am still getting the same error, no matter what I do. I am newbie again (was a DBA in 1990...when I used to have the same error and fix it in seconds...not sure why this problem still lingers in Oracle) so most likely I am overlooking something. Below are my tnsnames.ora and liserner.ora files
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
i have a inventory system and trying to connect remote database one by one throught two static ips. If first ip is not ping then go to 2nd ip only when open the login.fmx page
I am getting beloww error very frequently in database log and not able to connect to the database.
************************ Fatal NI connect error 12170.
VERSION INFORMATION: TNS for 64-bit Windows: Version 11.2.0.2.0 - Production Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production Time: 01-FEB-2012 18:00:34 Tracing not turned on. Tns error struct: ns main err 12535
TNS-12535: TNS:operation timed out ns secondary err 12606 nt main err 0 nt secondary err 0 nt OS err 0 Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.179.1.24)(PORT=65503)) WARNING: inbound connection timed out (ORA-3136) Wed Feb 01 18:00:44 2012 *****************
am getting this message when am connecting to a database :
ora-12519:Message 12519 not found;product=RDBMS80 facility = ORA
am not getting this message all the time, sometimes am connected without any problem sometimes i get this message and i have to try again several times until am connected
i searched the net and my database provider guided me to this log URL.....
I'm trying to connect from Oracle 11g (11.2.0.1.0) to Sybase Adaptive Server Anywhere (9.0.2.3527). My Oracle environment is running on Linux Centos 5.3, the sybase database runs on a Windows Server.
All my attempts have failed so far - both through Oracle Database Gateway for Sybase and via Oracle Database Gateway for ODBC in combination with freeTDS. Using either way I'm ending up with apparently the same error:
ASA Error -611: Transact-SQL feature not supported
When I use db link created via dg4sybs (Oracle Database Gateway for Sybase) I get this: SQL> SELECT * FROM aaa@hvx; SELECT * FROM aaa@hvx * ERROR at line 1: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[code]....
When I use db link created via dg4odbc (Oracle Database Gateway for ODBC) and freeTDS driver I get this:
SQL> SELECT * FROM aaa@hvx1; SELECT * FROM aaa@hvx1 * ERROR at line 1: ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
[code]....
It seems both drivers use Transact-SQL instructions which are then denied by ASA. I'm not familiar with Sybase products at all, but as far as what my googling revealed the Transact-SQL is only supported in Adaptive Server Enterprise (enterprise-class version of Sybase's database). I couldn't figure out if there's a way how to disable Transact-SQL in the driver configuration. how to connect from Oracle (10g or 11g) to Sybase Adaptive Server Anywhere?
when i am connecting to my database in command prompt,sql * plus editor is it successfully connecting to the database but not connecting with the oracle client OEM.
but after connecting the LAN it is not connecting and also in the case when i am connecting to the internet through the USB datacard it is not connecting with the oracle client OEM.
how can i connect to database when the LAN,USB datacard connection.
I was trying to connect to SQL server from Oracle using Oracle heterogeneous services (HS).But I found that I do not have HS installed on my system. It was mentioned in Oracle website that we need to run 'caths.sql' script under the path $ORACLE_HOME/rdbms/admin.
But I do not have any such folder(rdbms) in my $ORACLE_HOME.What does it mean? And how can I install HS alone on my system(Since I already have oracle)
i got static ip from witribe a broadband company in pakistan i am trying to connect database from client side computer who connect with internet when i ping my server it reply with good speed but when i try to connect database the message appear (Unable to connect Destination) but it works very well with Local Area Network computers. More how can we change port 1521 in client sides
I would like to implement connect time fail over from my JDBC thin client. The client will try to first connect with dedicated connection mode, if the connection time crosses more than two seconds, then connection will be opened with shared mode. To implement this, I have put the following connection string in my JDBC URL. I am able to connect to database with this URL, however it seems fail over does not work. Is it because, my database listener is not configured with dynamic service registration. If I implement the dynamic service registration, is fail over going to work? Note, I want to fail over in the same database instance but with different listener.
I have a really strange problem connecting from a new client to an Oracle server, here are the points :
- There is no problem with DB server and its listener and all that as I am able to connect from other clients - I have installed the oraclient on this machine ( it is a XP machine ) and copy/pasted the TNSNAMES.ORA from one of those correct PCs here and when I do a TNSPING is returns OK - even when I open oracle net manager I see the TNS entries in there and when I test a connection thru it is says successfull - BUT WHEN I USE SQL+ or TOAD or ODBC ( any of these) trying to make a connection using the exact same TNS entries it returns :
"ORA-12154: TNS:could not resolve the connect identifier specified"
- I have tried with both IP and Host name but no luck - TNSNames.Ora and sqlnet.ora both are located here : oracleproduct10.2.0client_1NETWORKADMIN - there is just one oracle home - I have already uninstalled/installed oracle client - These lines are included in Sqlnet.ora : SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES)
I marked those entries in Sqlnet.ora and that made no diff in result, another thing : if I use easy connect method : sqlplus scott/tiger@<Servername>:1521/ORCL it does connect but using TNSNames still I can not get connected. so strange!!, seems somehow the TNS file even is not being picked or looked at !
I was trying to connect to oracle 10g database from oracle 10g client. But unable to do so.
i am able to tnsping the db from client but unable to estatblish sqlplus connection. I get ORA-28547 error when i issue the command sqlplus hr/***@db1. ORA-1560 when the command sqlplus hr/*** is issued.
I have mentioned the listener and tnsnames.ora files
I have both 10g and 11g installed in my machine.There are so many CI builds that runs without problems.For few builds which uses 10g, it throws errors as ,
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 27 01:18:52 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. ERROR: ORA-12154: TNS:could not resolve the connect identifier specified Enter user-name:
Only at a particular step, this is happening. After this,if some-other target is connecting to Oracle,it is able to connect.
I have a database up and running (including listener) on machine A. From that machine, everything seems fine. However, when I try to connect to it from another machine (say, machine B) on the network, the connection cannot be established (exact message: connection to database failed: The Network adapter cannot establish the connection).
I can successfully ping machine A from machine B. The machine A db is a default install (ORCL).
Is it possible the DB listener is not configured properly to connect to remote clients? On machine B, I have oracle tools such as SQLPLUS, Oracle Net Manager, and Net Configuration Assistant.
I'm trying to connect Oracle 11g database from Oracle 9i database, by creating dblink on Oracle 9i database. But my session got hang while i perform this. Here i'm giving the steps i followed on my both the database. Here Oracle 9i database is my source db and Oracle 11g is my target db.
Following steps/setting on Oralce 11g Database
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ sec_case_sensitive_logon boolean TRUE
SQL> alter user SSA identified by SSA;
User altered.
Password File recreted on Oracle 11g Database Server
DROP DATABASE LINK "SSA11G.SSA_DB1.WBTEA.COM"; CREATE DATABASE LINK "SSA11G.SSA_DB1.WBTEA.COM" CONNECT TO SSA IDENTIFIED BY SSA USING 'DEVDATA.DEV11G';
I am facing difficulty in connecting Oracle 10g client to Oracle 10g database. Both the machines are in windows xp with service pack-2. The following observations are made in server machine
1. The loopback test of the server is successful. 2. One net service name created in the server end. 3. Database connection is successful with above service name. 4. tnsping <server ip address> is successful
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
connecting two oracle database in two different server.I installed Oracle 10g XE in both system.Both system act as Server.I need to connect both server using database link concept.
how to use the tnsnames,ora and listener.ora file for connecting both system.
We want to configure HSODBC on HP-UX 11.23 for Oracle Database 10g R2 in order to establish a DB link from Oracle to Netezza.We have installed the ODBC Drivers too..Currently we have not done any configurations and we go via an AIX box to establish a link.We want to get rid of the AIX box and instead establish directl link towards netezza from HP-UX Box.
Does Oracle support have some guidelines or steps to setup HSODBC on Oracle database 10g r2 residing on HP-UX 11.23 towards Netezza?
I have a strange problem of connecting Oracle Forms6i from our Remote site.actually we change our IP address of lease line, we connect to it.but when we connect locally,forms are running without any problem,but when we connect globally or from other sites it can't able to connect,even sql prompt and toad also connect from remote site,but when we try to connect forms(forms runtime) it gives error message(ORA-12203: TNS:unable to connect to destination).when we connect this application from local application(Forms) it can connect well but from globally it can't able to connect.
I install oracle database 11g and developer 6i on windows7 64bit server everything is working fine on the server and i install developer 6i on windows XP on client now i'm getting "ora-12203:TNS: unable to connect to destination" when trying to connect the server. i have check the TNSNAMES.ORA file the configuration is fine. then why i'm getting this message?
While connecting to Database through sqlplus as sysdba, error pop-up.
SQL> conn sysdba@disdevt Enter password: ******* ERROR: ORA-12154: TNS:could not resolve the connect identifier specified Warning: You are no longer connected to ORACLE. SQL>
but i am able to log-in to database through pl/sql developer. Since TNS is same for both.
I'm getting this information in sqlnet.log file lying at D:oracleoradatadatabase
Fatal NI connect error 12638, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclemaninder)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')) (CONNECT_DATA=(SID=maninder)(CID=(PROGRAM=d:oracleora92inORACLE.EXE)(HOST=SAI-E6C10175EE4)(USER=OraUser)))) [code]...
