Networking And Gateways :: Connect To SQL Server From Oracle Using Heterogeneous Services?
Mar 11, 2011
I was trying to connect to SQL server from Oracle using Oracle heterogeneous services (HS).But I found that I do not have HS installed on my system. It was mentioned in Oracle website that we need to run 'caths.sql' script under the path $ORACLE_HOME/rdbms/admin.
But I do not have any such folder(rdbms) in my $ORACLE_HOME.What does it mean? And how can I install HS alone on my system(Since I already have oracle)
I have a requirement wherein I need to access the MS ACCESS database table from Oracle Client.I have created ODBC data source and have configured tnsnames.ora and listener.ora for the same. As a next step I am trying to configure HS init file for hsodbc connection but couldn't find the directory hs in $ORACLE_HOME (<ORACLE_HOME>hsadmininit******.ora). Any patch that needs to be applied for hsodbc connection in the server.
when iam running netca on oracle llg iam getting the following error..[wstdba@ora11g ~]$ netca
java.io.FileNotFoundException: /oraeng/app/oracle/product/11.1.0/app/oracle11g/cfgtoollogs/netca/netca_OraDb11g_home1-0802284PM3437.log (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:179) at java.io.FileOutputStream.<init>(FileOutputStream.java:102) at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1...All my services are up and running..
i have created a listener for my db and register the service to it some 2 years back now i have checked it and it display as follows
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 24-JAN-2012 13:49:44 Copyright (c) 1991, 2009, Oracle. All rights reserved. Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.x.x.x)(PORT=1521))) STATUS of the LISTENER ------------------------ Alias LISTENER Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production Start Date 24-JAN-2012 13:45:44 Uptime 0 days 0 hr. 3 min. 59 sec Trace Level off Security ON: Local OS Authentication SNMP OFF [code]....
now i have stop and then restart but same status? so how can i manually register it again or anyother solution as i cant run netmgr
I have created two database one for production and another one for test.I created both database in shared_server mode(by using dbca),after than I did not change anything.My problem is when i connect to test database from outside lan through static ip its working well,but when i connect to production database which is not connected. I checked and compared two databases,then I find there are some changes in dispatcher and mts_ dispatcher parameters.And I used this query to check the shared_server status,
ie.select * from v$shared_server,
the output of this query is attached with this post.
I installed Oracle Express on my Windows 2003 Enterprise server. And right off the bat I cannot connect to it via command line. I have googled and read many sites, but am still getting the same error, no matter what I do. I am newbie again (was a DBA in 1990...when I used to have the same error and fix it in seconds...not sure why this problem still lingers in Oracle) so most likely I am overlooking something. Below are my tnsnames.ora and liserner.ora files
# This file is actually generated by netca. But if customers choose to # install "Software Only", this file wont exist and without the native # authentication, they will not be able to connect to the database on NT.
I would like to implement connect time fail over from my JDBC thin client. The client will try to first connect with dedicated connection mode, if the connection time crosses more than two seconds, then connection will be opened with shared mode. To implement this, I have put the following connection string in my JDBC URL. I am able to connect to database with this URL, however it seems fail over does not work. Is it because, my database listener is not configured with dynamic service registration. If I implement the dynamic service registration, is fail over going to work? Note, I want to fail over in the same database instance but with different listener.
I have a really strange problem connecting from a new client to an Oracle server, here are the points :
- There is no problem with DB server and its listener and all that as I am able to connect from other clients - I have installed the oraclient on this machine ( it is a XP machine ) and copy/pasted the TNSNAMES.ORA from one of those correct PCs here and when I do a TNSPING is returns OK - even when I open oracle net manager I see the TNS entries in there and when I test a connection thru it is says successfull - BUT WHEN I USE SQL+ or TOAD or ODBC ( any of these) trying to make a connection using the exact same TNS entries it returns :
"ORA-12154: TNS:could not resolve the connect identifier specified"
- I have tried with both IP and Host name but no luck - TNSNames.Ora and sqlnet.ora both are located here : oracleproduct10.2.0client_1NETWORKADMIN - there is just one oracle home - I have already uninstalled/installed oracle client - These lines are included in Sqlnet.ora : SQLNET.AUTHENTICATION_SERVICES= (NTS) NAMES.DIRECTORY_PATH= (TNSNAMES)
I marked those entries in Sqlnet.ora and that made no diff in result, another thing : if I use easy connect method : sqlplus scott/tiger@<Servername>:1521/ORCL it does connect but using TNSNames still I can not get connected. so strange!!, seems somehow the TNS file even is not being picked or looked at !
I was trying to connect to oracle 10g database from oracle 10g client. But unable to do so.
i am able to tnsping the db from client but unable to estatblish sqlplus connection. I get ORA-28547 error when i issue the command sqlplus hr/***@db1. ORA-1560 when the command sqlplus hr/*** is issued.
I have mentioned the listener and tnsnames.ora files
i have a inventory system and trying to connect remote database one by one throught two static ips. If first ip is not ping then go to 2nd ip only when open the login.fmx page
I am getting beloww error very frequently in database log and not able to connect to the database.
************************ Fatal NI connect error 12170.
VERSION INFORMATION: TNS for 64-bit Windows: Version 11.2.0.2.0 - Production Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 11.2.0.2.0 - Production Time: 01-FEB-2012 18:00:34 Tracing not turned on. Tns error struct: ns main err 12535
TNS-12535: TNS:operation timed out ns secondary err 12606 nt main err 0 nt secondary err 0 nt OS err 0 Client address: (ADDRESS=(PROTOCOL=tcp)(HOST=10.179.1.24)(PORT=65503)) WARNING: inbound connection timed out (ORA-3136) Wed Feb 01 18:00:44 2012 *****************
I have both 10g and 11g installed in my machine.There are so many CI builds that runs without problems.For few builds which uses 10g, it throws errors as ,
SQL*Plus: Release 11.2.0.1.0 Production on Thu Dec 27 01:18:52 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. ERROR: ORA-12154: TNS:could not resolve the connect identifier specified Enter user-name:
Only at a particular step, this is happening. After this,if some-other target is connecting to Oracle,it is able to connect.
I have a database up and running (including listener) on machine A. From that machine, everything seems fine. However, when I try to connect to it from another machine (say, machine B) on the network, the connection cannot be established (exact message: connection to database failed: The Network adapter cannot establish the connection).
I can successfully ping machine A from machine B. The machine A db is a default install (ORCL).
Is it possible the DB listener is not configured properly to connect to remote clients? On machine B, I have oracle tools such as SQLPLUS, Oracle Net Manager, and Net Configuration Assistant.
am getting this message when am connecting to a database :
ora-12519:Message 12519 not found;product=RDBMS80 facility = ORA
am not getting this message all the time, sometimes am connected without any problem sometimes i get this message and i have to try again several times until am connected
i searched the net and my database provider guided me to this log URL.....
I have a strange problem of connecting Oracle Forms6i from our Remote site.actually we change our IP address of lease line, we connect to it.but when we connect locally,forms are running without any problem,but when we connect globally or from other sites it can't able to connect,even sql prompt and toad also connect from remote site,but when we try to connect forms(forms runtime) it gives error message(ORA-12203: TNS:unable to connect to destination).when we connect this application from local application(Forms) it can connect well but from globally it can't able to connect.
I install oracle database 11g and developer 6i on windows7 64bit server everything is working fine on the server and i install developer 6i on windows XP on client now i'm getting "ora-12203:TNS: unable to connect to destination" when trying to connect the server. i have check the TNSNAMES.ORA file the configuration is fine. then why i'm getting this message?
While connecting to Database through sqlplus as sysdba, error pop-up.
SQL> conn sysdba@disdevt Enter password: ******* ERROR: ORA-12154: TNS:could not resolve the connect identifier specified Warning: You are no longer connected to ORACLE. SQL>
but i am able to log-in to database through pl/sql developer. Since TNS is same for both.
I'm getting this information in sqlnet.log file lying at D:oracleoradatadatabase
Fatal NI connect error 12638, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oraclemaninder)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')) (CONNECT_DATA=(SID=maninder)(CID=(PROGRAM=d:oracleora92inORACLE.EXE)(HOST=SAI-E6C10175EE4)(USER=OraUser)))) [code]...
I'm trying to connect from Oracle 11g (11.2.0.1.0) to Sybase Adaptive Server Anywhere (9.0.2.3527). My Oracle environment is running on Linux Centos 5.3, the sybase database runs on a Windows Server.
All my attempts have failed so far - both through Oracle Database Gateway for Sybase and via Oracle Database Gateway for ODBC in combination with freeTDS. Using either way I'm ending up with apparently the same error:
ASA Error -611: Transact-SQL feature not supported
When I use db link created via dg4sybs (Oracle Database Gateway for Sybase) I get this: SQL> SELECT * FROM aaa@hvx; SELECT * FROM aaa@hvx * ERROR at line 1: ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[code]....
When I use db link created via dg4odbc (Oracle Database Gateway for ODBC) and freeTDS driver I get this:
SQL> SELECT * FROM aaa@hvx1; SELECT * FROM aaa@hvx1 * ERROR at line 1: ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using
[code]....
It seems both drivers use Transact-SQL instructions which are then denied by ASA. I'm not familiar with Sybase products at all, but as far as what my googling revealed the Transact-SQL is only supported in Adaptive Server Enterprise (enterprise-class version of Sybase's database). I couldn't figure out if there's a way how to disable Transact-SQL in the driver configuration. how to connect from Oracle (10g or 11g) to Sybase Adaptive Server Anywhere?
I have oracle 10g and Developer suite installed locally in my system and I have edited my TNSNAMES.ora file and added a entry for VISLINUX(for both Developer suite and oracle DB TNSNAMES.ora files).
When I use TNSPING comand I get an error for the schemas APPDEV and VISLINUX.
D:Documents and SettingsBAR>tnsping appdev
TNS Ping Utility for 32-bit Windows: Version 10.1.0.4.2 - Production on 25-DEC-2 008 20:22:57
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files: C:DevSuiteHome_1 etworkadminsqlnet.ora
when i am connecting to my database in command prompt,sql * plus editor is it successfully connecting to the database but not connecting with the oracle client OEM.
but after connecting the LAN it is not connecting and also in the case when i am connecting to the internet through the USB datacard it is not connecting with the oracle client OEM.
how can i connect to database when the LAN,USB datacard connection.
